| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix Route Information option length validation
rt6_route_rcv() validates the Route Information option (RFC 4191) length
against the prefix length, but both checks are off by one.
rinfo->length is the ND option length in units of 8 octets and it
*includes* the 8-byte option header, so an option carrying N bytes of
prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3
when Prefix Length is greater than 64, and 2 or 3 when it is greater
than 0. The code accepts length >= 2 and length >= 1 respectively.
ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix,
so a Router Advertisement with (prefix_len=128, length=2) or
(prefix_len=64, length=1) makes the kernel read up to 8 bytes past the
end of the option. Those bytes end up in the prefix of the route that
gets installed, so they are visible to userspace:
# RA with a Route Information option (prefix_len=128, length=2)
# followed by a source link-layer address option, 01 01 de ad be ef ca fe
$ ip -6 route show
2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra
^^^^^^^^^^^^^^^^^^ the next option, read out of bounds
When the Route Information option is the last one in the packet, those
eight bytes come from the skb tail room instead.
Reject the option lengths RFC 4191 does not allow. |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Fix board ID over-read
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan. |
| Ground Station is a browser-based suite for satellite tracking, SDR reception, hardware control, and telemetry decoding. Prior to version 0.4.13, the unauthenticated configure-sdr Socket.IO command accepts a recordingPath for the sigmf-playback SDR and backend/handlers/entities/sdr.py stores it without validation before backend/hardware/sigmfprobe.py opens the path without enforcing containment. An absolute path or parent-directory escape ending in .sigmf-meta is parsed as JSON and returned in reply["data"]["metadata"] by the get-sdr-parameters flow. Exploitation requires the metadata file to be readable JSON and to have a sibling .sigmf-data file, but it can disclose contents outside backend/data/recordings without authentication. This issue is fixed in version 0.4.13. |
| phpMyFAQ before 4.1.7 stores password reset tokens in a publicly accessible tracking file when user tracking is enabled. Unauthenticated attackers can read the tracking file at content/core/data/trackingDDMMYYYY to extract reset tokens and replay them against the password reset API to take over user accounts. |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 4.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. While the vulnerability is in Oracle Hyperion Financial Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Oracle Agile PLM MCAD Connector product of Oracle Supply Chain (component: CAX Client). The supported version that is affected is 3.6. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Agile PLM MCAD Connector. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Agile PLM MCAD Connector accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Oracle Hyperion Financial Management executes to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Financial Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| RansomLook exposed complete API keys in the HTML source of the authenticated /admin/apikeys administration page. Although the interface displayed only a shortened representation of each key, the full token was embedded in hidden form fields used by the enable/disable, private-access, and delete actions.
As a result, API credentials could be recovered by inspecting the page source or DOM. The credentials could also be unintentionally exposed through components that retain or inspect HTTP response bodies, such as debugging proxies, browser caches, monitoring systems, or other intermediaries. An attacker obtaining one of these tokens could subsequently authenticate using the privileges assigned to that key, including access to private data where the key was granted such permissions.
The patch removes API keys from subsequent page rendering and replaces them with SHA-256-derived opaque handles. Administrative actions submit only these handles, which are resolved back to the corresponding token on the server. The full API key is therefore disclosed only once, when it is initially created. |
| The Lean 4 kernel does not check that the body of an opaque declaration is closed. environment::add_opaque omits the check_no_metavar_no_fvar call that the definition and theorem paths perform, so a value containing a free variable that is absent from the local context is not rejected outright. A metaprogram can first cause the kernel to create a temporary local of type False and record its type in the type checker's inference cache, then restore the local context while that cache entry persists on the same type checker instance, and finally submit an opaque declaration whose value is the now-unbound variable. The cache lookup answers before the branch that would test membership of the local context, so the kernel infers the cached type and admits an opaque constant of type False, from which any proposition follows. The declaration is accepted through the ordinary checked path at maximum kernel checking, without sorry, unsafeCast, debug.skipKernelTC, addDeclWithoutChecking, foreign code or a modified .olean file, and the result carries no axioms. Fixed in 4.32.2 by adding the missing closure check. |
| The UMP Stream responder library in lib/midi2/ump_stream_responder.c builds reply packets in a 16-byte struct midi_ump (uint32_t data[4]). The builders make_endpoint_info() and make_function_block_info() populate only the first two words (res.data[0] and res.data[1]) and, before this fix, declared their result as an uninitialised local (struct midi_ump res;). The remaining two words (res.data[2], res.data[3]) retain stale stack contents.
Endpoint Info and Function Block Info notifications are UMP Stream messages (UMP_MT_UMP_STREAM), which are 4 words long, so the full 16-byte packet — including the two uninitialised words — is transmitted verbatim by cfg->send(). The responder is driven by attacker-supplied UMP Stream Endpoint-Discovery / Function-Block-Discovery requests via ump_stream_respond(). In the in-tree Network MIDI 2.0 server (subsys/net/lib/midi2/netmidi2.c) these requests arrive as UDP datagrams and, with the default no-authentication endpoint, a remote peer can establish a session and trigger the responses; the same library also serves USB MIDI 2.0 hosts.
Each discovery request causes the device to disclose 8 bytes of its own uninitialised stack memory to the peer, and the request is freely repeatable. This is a confidentiality-only information leak (root cause is use of an uninitialised variable, CWE-457/CWE-908); the leaked words could include residual data or pointer values. There is no memory-corruption, integrity, or availability impact.
The fix zero-initialises both result structs (struct midi_ump res = {0};), so the trailing words are cleared before transmission. These are the only two responder builders that left trailing words unset (send_string() already zeroes its buffer), so the leak is fully closed. |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via SQL to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Financial Management. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Unauthenticated Sensitive Data Exposure in WP Cafe Pro < 3.0.15 versions. |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Financial Reporting product of Oracle Hyperion (component: Server). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Hyperion Financial Reporting executes to compromise Oracle Hyperion Financial Reporting. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Financial Reporting accessible data as well as unauthorized read access to a subset of Oracle Hyperion Financial Reporting accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:H/A:N). |
| AVideo through commit 9c39d8c8 contains an information exposure vulnerability in feed/index.php that allows unauthenticated attackers to retrieve channel owner email addresses by supplying a public channel name parameter. Attackers can enumerate all creator email addresses by iterating through public channel names and extract them from the itunes:email and itunes:author RSS elements, enabling account takeover attempts and phishing campaigns. |
| OliveTin gives access to predefined shell commands from a web interface. The `filterToDefinedArgumentsOnly` function in the executor is intended to discard any arguments not explicitly defined in the action's configuration. However, prior to commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d, a special case allows any argument whose name starts with `ot_` to bypass this filter. While two system arguments (`ot_executionTrackingId` and `ot_username`) are injected by OliveTin and overridden, all other `ot_`-prefixed arguments supplied by the user pass through unmodified. These bypassed arguments are not type-checked — the validation loop only iterates over the action's defined arguments, so `ot_`-prefixed arguments skip all type safety checks entirely; set as environment variables — via `buildEnv()`, with completely unvalidated values, and passed to the executed command; and included in the template context — available as `.Arguments.ot_*` in template rendering. Commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d contains a patch. |
