| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate ff offset
This adds sanity checks for ff offset. There is a check
on rt->first_free at first, but walking through by ff
without any check. If the second ff is a large offset.
We may encounter an out-of-bound read. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add a check for attr_names and oatbl
Added out-of-bound checking for *ane (ATTR_NAME_ENTRY). |
| In the Linux kernel, the following vulnerability has been resolved:
kcsan: Turn report_filterlist_lock into a raw_spinlock
Ran Xiaokai reports that with a KCSAN-enabled PREEMPT_RT kernel, we can see
splats like:
| BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
| preempt_count: 10002, expected: 0
| RCU nest depth: 0, expected: 0
| no locks held by swapper/1/0.
| irq event stamp: 156674
| hardirqs last enabled at (156673): [<ffffffff81130bd9>] do_idle+0x1f9/0x240
| hardirqs last disabled at (156674): [<ffffffff82254f84>] sysvec_apic_timer_interrupt+0x14/0xc0
| softirqs last enabled at (0): [<ffffffff81099f47>] copy_process+0xfc7/0x4b60
| softirqs last disabled at (0): [<0000000000000000>] 0x0
| Preemption disabled at:
| [<ffffffff814a3e2a>] paint_ptr+0x2a/0x90
| CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.11.0+ #3
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
| Call Trace:
| <IRQ>
| dump_stack_lvl+0x7e/0xc0
| dump_stack+0x1d/0x30
| __might_resched+0x1a2/0x270
| rt_spin_lock+0x68/0x170
| kcsan_skip_report_debugfs+0x43/0xe0
| print_report+0xb5/0x590
| kcsan_report_known_origin+0x1b1/0x1d0
| kcsan_setup_watchpoint+0x348/0x650
| __tsan_unaligned_write1+0x16d/0x1d0
| hrtimer_interrupt+0x3d6/0x430
| __sysvec_apic_timer_interrupt+0xe8/0x3a0
| sysvec_apic_timer_interrupt+0x97/0xc0
| </IRQ>
On a detected data race, KCSAN's reporting logic checks if it should
filter the report. That list is protected by the report_filterlist_lock
*non-raw* spinlock which may sleep on RT kernels.
Since KCSAN may report data races in any context, convert it to a
raw_spinlock.
This requires being careful about when to allocate memory for the filter
list itself which can be done via KCSAN's debugfs interface. Concurrent
modification of the filter list via debugfs should be rare: the chosen
strategy is to optimistically pre-allocate memory before the critical
section and discard if unused. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Use of a Broken or Risky Cryptographic Algorithm vulnerability in the DD boost. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an use of a Broken or Risky Cryptographic Algorithm vulnerability in the Authentication. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain a Heap-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Denial of service. |
| Dependency-Track is a component analysis platform that allows organizations to identify and reduce risk in the software supply chain. Prior to version 4.13.5, Dependency-Track may send credentials meant for a private NuGet repository to `api.nuget.org` via the HTTP `Authorization` header, and may disclose names and versions of components marked as internal to `api.nuget.org`. This can happen if the Dependency-Track instance contains .NET components, a custom NuGet repository has been configured, the custom repository has been configured with authentication credentials, and the repository server does not provide `PackageBaseAddress` resource in its service index. The issue has been fixed in Dependency-Track 4.13.5. Some workarounds are avaialble. Disable custom NuGet repositories until the patch has been applied, invalidate the previously used credentials, and generate new credentials for usage after the patch has been applied. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain a Stack-based Buffer Overflow vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: don't walk off the end of ealist
Add a check before visiting the members of ea to
make sure each ea stays within the ealist. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()
xattr in ocfs2 maybe 'non-indexed', which saved with additional space
requested. It's better to check if the memory is out of bound before
memcmp, although this possibility mainly comes from crafted poisonous
images. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: add bounds checking to ocfs2_check_dir_entry()
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_set_termination(): allow sleeping GPIOs
In commit 6e86a1543c37 ("can: dev: provide optional GPIO based
termination support") GPIO based termination support was added.
For no particular reason that patch uses gpiod_set_value() to set the
GPIO. This leads to the following warning, if the systems uses a
sleeping GPIO, i.e. behind an I2C port expander:
| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c
| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c
Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the
use of sleeping GPIOs. |
| Wasmtime is a runtime for WebAssembly. Wasmtime 37.0.0 and 37.0.1 have memory leaks in the C/C++ API when using bindings for the `anyref` or `externref` WebAssembly values. This is caused by a regression introduced during the development of 37.0.0 and all prior versions of Wasmtime are unaffected. If `anyref` or `externref` is not used in the C/C++ API then embeddings are also unaffected by the leaky behavior. The `wasmtime` Rust crate is unaffected by this leak.
Development of Wasmtime 37.0.0 included a refactoring in Rust of changing the old `ManuallyRooted<T>` type to a new `OwnedRooted<T>` type. This change was integrated into Wasmtime's C API but left the C API in a state which had memory leaks. Additionally the new ownership semantics around this type were not reflected into the C++ API, making it leak-prone. A short version of the change is that previously `ManuallyRooted<T>`, as the name implies, required manual calls to an "unroot" operation. If this was forgotten then the memory was still cleaned up when the `wasmtime_store_t` itself was destroyed eventually. Documentation of when to "unroot" was sparse and there were already situations prior to 37.0.0 where memory would be leaked until the store was destroyed anyway. All memory, though, was always bound by the store, and destroying the store would guarantee that there were no memory leaks.
In migrating to `OwnedRooted<T>` the usage of the type in Rust changed. A manual "unroot" operation is no longer required and it happens naturally as a destructor of the `OwnedRooted<T>` type in Rust itself. These new resource ownership semantics were not fully integrated into the preexisting semantics of the C/C++ APIs in Wasmtime. A crucial distinction of `OwnedRooted<T>` vs `ManuallyRooted<T>` is that the `OwnedRooted<T>` type allocates host memory outside of the store. This means that if an `OwnedRooted<T>` is leaked then destroying a store does not release this memory and it's a permanent memory leak on the host.
This led to a few distinct, but related, issues arising: A typo in the `wasmtime_val_unroot` function in the C API meant that it did not actually unroot anything. This meant that even if embedders faithfully call the function then memory will be leaked. If a host-defined function returned a `wasmtime_{externref,anyref}_t` value then the value was never unrooted. The C/C++ API no longer has access to the value and the Rust implementation did not unroot. This meant that any values returned this way were never unrooted. The goal of the C++ API of Wasmtime is to encode automatic memory management in the type system, but the C++ API was not updated when `OwnedRooted<T>` was added. This meant that idiomatic usage of the C++ API would leak memory due to a lack of destructors on values.
These issues have all been fixed in a 37.0.2 release of Wasmtime. The implementation of the C and C++ APIs have been updated accordingly and respectively to account for the changes of ownership here. For example `wasmtime_val_unroot` has been fixed to unroot, the Rust-side implementation of calling an embedder-defined function will unroot return values, and the C++ API now has destructors on the `ExternRef`, `AnyRef`, and `Val` types. These changes have been made to the 37.0.x release branch in a non-API-breaking fashion. Changes to the 38.0.0 release branch (and `main` in the Wasmtime repository) include minor API updates to better accommodate the API semantic changes. The only known workaround at this time is to avoid using `externref` and `anyref` in the C/C++ API of Wasmtime. If avoiding those types is not possible then it's required for users to update to mitigate the leak issue. |
| The 'zipfile' module would not check the validity of the ZIP64 End of
Central Directory (EOCD) Locator record offset value would not be used to
locate the ZIP64 EOCD record, instead the ZIP64 EOCD record would be
assumed to be the previous record in the ZIP archive. This could be abused
to create ZIP archives that are handled differently by the 'zipfile' module
compared to other ZIP implementations.
Remediation maintains this behavior, but checks that the offset specified
in the ZIP64 EOCD Locator record matches the expected value. |
| A Cross-Site Scripting (XSS) vulnerability was found in the register.php page of PuneethReddyHC Event Management System 1.0, where the event_id GET parameter is improperly handled. An attacker can craft a malicious URL to execute arbitrary JavaScript in the victim s browser by injecting code into this parameter. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of service and Unauthorized access. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Use of a Broken or Risky Cryptographic Algorithm vulnerability in the DDOS. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to information disclosure. The vulnerability could be leveraged by attackers to conduct phishing attacks that cause users to divulge sensitive information. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability to execute arbitrary commands with root privileges. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Denial of service. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.4, LTS2024 release Versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in the UI. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. |
