| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers
rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: Correct data type for scan index to avoid infinite loop
A kernel soft lockup was observed during Wi-Fi scanning on the 6GHz band.
The CPU becomes stuck in rtw89_hw_scan_add_chan_ax for over 20 seconds,
leading to a system panic.
RIP points to 0f b6 c3 (movzbl %bl, %eax), which zero-extends
the low 8 bits of RBX into RAX.
RBX (the counter i) has reached a huge value: 0x137466a1.
watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u16:4:6124]
Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
RIP: 0010:rtw89_hw_scan_add_chan_ax+0xb3/0x6e0 [rtw89_core]
Code: a0 48 89 45 a8 44 89 6d 9c 44 89 75 98 eb 29 66 66 2e 0f 1f
84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 c3 01
<0f> b6 c3 41 3b 44 24 74 0f 83 0b 02 00 00 0f b6 c3 48 8d 14 80 49
RSP: 0018:ffffcb48cbaa39f8 EFLAGS: 00000202
RAX: 0000000000000005 RBX: 00000000137466a1 RCX: 0000000000000000
RDX: ffff89ffc9d851a8 RSI: 0000000000004f0d RDI: 0000000096af0130
RBP: ffffcb48cbaa3a60 R08: 0000000000000000 R09: ffff8a00b7502080
R10: ffff8a00b75ff600 R11: 0000000000000000 R12: ffff89ffc7553870
R13: ffff8a00b7ac8f19 R14: ffff8a00b75020d8 R15: ffff89ffc3d54d80
FS: 0000000000000000(0000) GS:ffff8a014f962000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007558d7f9f4c4 CR3: 0000000178040001 CR4: 00000000001706f0
Call Trace:
<TASK>
rtw89_hw_scan_prep_chan_list_ax+0x8a/0x400 [rtw89_core]
rtw89_hw_scan_start+0x546/0x8a0 [rtw89_core]
? rtw89_fw_h2c_default_cmac_tbl+0x13c/0x1f0 [rtw89_core]
rtw89_ops_hw_scan+0xae/0x120 [rtw89_core]
drv_hw_scan+0xbb/0x180 [mac80211]
__ieee80211_start_scan+0x2fc/0x750 [mac80211]
ieee80211_request_scan+0xe/0x20 [mac80211]
ieee80211_scan+0x123/0x190 [mac80211]
rdev_scan+0x40/0x110 [cfg80211]
cfg80211_scan_6ghz+0x5a1/0xa30 [cfg80211]
By objdump with source:
for (i = 0; i < req->n_6ghz_params; i++) {
5fbc0: 83 c3 01 add $0x1,%ebx --> i++
5fbc3: 0f b6 c3 movzbl %bl,%eax --> get counter
fbc6: 41 3b 44 24 74 cmp 0x74(%r12),%eax
* RBX: 00000000137466a1 -> %bl = a1 -> EAX = 000000a1 (161) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer
In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit
descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both
firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478),
causing an out-of-bounds read from the pre-allocated DMA buffer when
skb_put_data copies new_len bytes. The USB transport already validates
this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the
PCIe path does not.
Add a check that new_len does not exceed the DMA buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: add bounds check on firmware mac_id in link lookup
The mac_id field in RX descriptors is 8 bits wide (0-255), but
assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries.
While the driver currently assigns mac_id values below 128, the
descriptor value comes from firmware and is not validated before use
as an array index. Add a defensive bounds check in
rtw89_assoc_link_rcu_dereference() to guard against out-of-range
firmware values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: fix OOB access from firmware tx status queue ID
ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a
4-bit hardware field (0-15), but the txq array only has
ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array
access.
Add a bounds check on ts.qid before using it as an array index. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cancel SSR work items during PCI shutdown
A reboot can crash the kernel if it overlaps with WLAN firmware crash
recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown
path while freeing DMA-backed MHI contexts.
Simplified trace:
dma_free_attrs
mhi_deinit_dev_ctxt [mhi]
ath11k_pci_power_down [ath11k_pci]
ath11k_pci_shutdown [ath11k_pci]
device_shutdown
kernel_restart
On the host side, SSR is driven by the MHI RDDM callback, which queues
reset_work to perform device recovery. reset_work power-cycles the device
by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The
power-down phase deinitializes MHI and frees DMA resources.
Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR
recovery flow. As a result, the shutdown path
(ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR
recovery sequence.
Fix this by canceling SSR-related work items during PCI shutdown, marking
the device as unregistering, and serializing the RDDM callback path that
checks and queues reset_work. This ensures that no new SSR recovery work
can be queued once teardown has started, and that any in-flight recovery
work is fully synchronized before device power-down, preventing MHI
teardown and DMA resource freeing from running more than once.
Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k
devices do not queue reset_work in normal SSR flows.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix potential null-ptr-deref in vxlan_gro_prepare_receive().
udp_tunnel_sock_release() could set sk->sk_user_data to NULL
while vxlan_gro_prepare_receive() is running.
Let's check if rcu_dereference_sk_user_data() is NULL after
skb_gro_remcsum_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix race between OPP addition and lookup
A race exists between dev_pm_opp_add_dynamic() and
dev_pm_opp_find_freq_exact():
CPU0 (add) CPU1 (lookup)
------------------------------- ------------------------------
_opp_add()
mutex_lock()
list_add(&new_opp->node, head)
mutex_unlock() _opp_table_find_key()
mutex_lock()
dev_pm_opp_get(opp)
kref_get()
mutex_unlock()
kref_init(&new_opp->kref)
dev_pm_opp_put()
kref_put_mutex()
The newly added OPP is inserted into the list before its kref is
initialized. A concurrent lookup can find this OPP and increment its
reference count while it is still uninitialized, leading to refcount
corruption and a potential premature free.
Fix this by initializing ->kref and ->opp_table before making the OPP
visible via list_add(). This ensures any concurrent lookup observes a
fully initialized object.
[ Viresh: Updated commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Check for page allocation failure correctly in TIO
Sashiko notes:
> if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it
> safe to pass it directly to page_address()?
>
> On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might
> compute a deterministic but invalid, non-zero virtual address. The
> subsequent if (tio_status) check would then evaluate to true, and
> sev_tsm_init_locked() would dereference the invalid pointer.
Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by
checking the page allocation itself for NULL, not the resulting virtual
address. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix blocking and non-blocking rng logic
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
After, the result will be similar to the following:
$ head -c 32 /dev/hwrng | hexdump -C
00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i|
00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.|
00000020 |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: fix add msg handle in send_queue ordered
In a benchmark scenario triggering a lot of requests that triggers a lot
of DLM messages on the network it can be that the mh->seq is not ordered
according the oldest seq number. This ordering is required by
dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older
sequence numbers that are ordered in the tail of "node->send_queue".
The side effects of not having it correct ordered regarding
"before(mh->seq, seq)" are refcounting issues and use-after free.
I only was able to reproduce this issue in a experimental DLM branch
and a user space DLM benchmark that uses io_uring. After changing this I
don't experienced any refcounting with the sending buffer issues anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries
bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to
lock the inode of the supplied dentry without checking if it is
NULL. If a negative dentry is passed (e.g. from
security_inode_create), d_inode(dentry) returns NULL, and
inode_lock(inode) will cause a NULL pointer dereference.
Trivially fix this by adding a NULL check for inode before attempting
to lock it, returning -EINVAL if it is NULL.
Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and
bpf_xattr_write_permission(). These warnings could be triggered by
passing a negative dentry to bpf_get_dentry_xattr() or the _locked
variants of the xattr kfuncs, potentially causing a Denial of Service
on systems with panic_on_warn enabled. Instead, simply return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
general protection fault: 0000 [#1] SMP NOPTI
CPU: 4 PID: 217 Comm: kworker/4:1
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:ipv6_del_addr+0xe9/0x280
RAX: dead000000000122
Call Trace:
addrconf_dad_stop+0x113/0x140
addrconf_dad_work+0x28c/0x430
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
ret_from_fork+0x35/0x40
Fold the addrconf_dad_end() logic into addrconf_dad_failure() under
a single ifp->lock critical section. The STABLE_PRIVACY branch
temporarily drops ifp->lock around address regeneration, so at
lock_errdad: verify the state is still POSTDAD before transitioning
to ERRDAD; bail out otherwise to avoid overwriting a state set by
another path while the lock was released. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier
mlx5_ib_alloc_transport_domain() allocates a transport domain and then
may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked.
Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an
error. Also return 0 explicitly in the no-loopback-capability success
branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure
mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with
mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path
through mlx5r_umr_unmap_free_xlt().
After mlx5_odp_populate_xlt() became fallible, its error path returned
directly and skipped that cleanup. This leaks the XLT DMA mapping and
buffer. If the emergency XLT page was used, it also leaves
xlt_emergency_page_mutex locked.
Break out of the loop so execution falls through the existing cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: fix integer overflow in immediate data length check
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/syncobj: Fix memory leak in drm_syncobj_find_fence()
Commit 18226ba52159 ("drm/syncobj: reject invalid flags in
drm_syncobj_find_fence") forgot to take into account the fact that
drm_syncobj_find() takes a reference to syncobj and returns early
without dropping the reference, leading to memory leaks.
Reported by: Sam Spencer <sam.spencer@arm.com> |
