| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the default installation and configuration of Gladinet CentreStack and TrioFox, there is an unauthenticated Local File Inclusion Flaw that allows unintended disclosure of system files. Exploitation of this vulnerability has been observed in the wild.
This issue impacts Gladinet CentreStack and Triofox: All versions prior to and including 16.7.10368.56560 |
| A flaw was found in Quay. Clickjacking is when an attacker uses multiple transparent or opaque layers to trick a user into clicking on a button or link on another page when they intend to click on the top-level page. During the pentest, it has been detected that the config-editor page is vulnerable to clickjacking. This flaw allows an attacker to trick an administrator user into clicking on buttons on the config-editor panel, possibly reconfiguring some parts of the Quay instance. |
| A stack-based buffer overflow can be remotely triggered when formatting an error message in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n". |
| A buffer overflow in the Control-M/Agent can lead to a local privilege escalation when an attacker has access to the system running the Agent.
This vulnerability impacts the out-of-support Control-M/Agent versions 9.0.18 to 9.0.20 and potentially earlier unsupported versions. |
| A path traversal in the Control-M/Agent can lead to a local privilege escalation when an attacker has access to the system running the Agent. This vulnerability impacts the out-of-support Control-M/Agent versions 9.0.18 to 9.0.20 and potentially earlier unsupported versions. This vulnerability was fixed in 9.0.20.100 and above. |
| A flaw was found in the mod_proxy_cluster in the Apache server. This issue may allow a malicious user to add a script in the 'alias' parameter in the URL to trigger the stored cross-site scripting (XSS) vulnerability. By adding a script on the alias parameter on the URL, it adds a new virtual host and adds the script to the cluster-manager page. |
| A flaw was found in libnbd. A server can reply with a block size larger than 2^63 (the NBD spec states the size is a 64-bit unsigned value). This issue could lead to an application crash or other unintended behavior for NBD clients that doesn't treat the return value of the nbd_get_size() function correctly. |
| If the Access Control List is enforced by the Control-M/Agent and the C router is in use (default in Out-of-support Control-M/Agent versions 9.0.18 to 9.0.20 and potentially earlier unsupported versions; non-default but configurable using the JAVA_AR setting in newer versions), the verification stops at the first NULL byte encountered in the email address referenced in the client certificate. An attacker could bypass configured ACLs by using a specially crafted certificate. |
| Out-of-support Control-M/Agent versions 9.0.18 to 9.0.20 (and potentially earlier unsupported versions) that are configured to use the non-default Blowfish cryptography algorithm use a hardcoded key. An attacker with access to network traffic and to this key could decrypt network traffic between the Control-M/Agent and Server. |
| A flaw was found in QEMU. An assertion failure was present in the usb_ep_get() function in hw/net/core.c when trying to get the USB endpoint from a USB device. This flaw may allow a malicious unprivileged guest user to crash the QEMU process on the host and cause a denial of service condition. |
| Stored Cross-Site Scripting (XSS) vulnerability in Energy CRM v2025 by Status Tracker Ltd, consisting of a stored XSS due to lack of proper validation of user input by sending a POST request to “/crm/create_invoice_submit.php”, using the “customerName_0” parameter. This vulnerability could allow a remote user to send a specially crafted query to an authenticated user and steal their cookie session details. |
| A vulnerability classified as critical was found in AMTT Hotel Broadband Operation System 1.0. This vulnerability affects the function popen of the file /manager/network/port_setup.php. The manipulation of the argument SwitchVersion/SwitchWrite/SwitchIP/SwitchIndex/SwitchState leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Handle invalid decoder vsi
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Don't call folio_wait_writeback() without a folio reference
folio_wait_writeback() requires that no spinlocks are held and that
a folio reference is held, as documented. After we dropped the PTL, the
folio could get freed concurrently. So grab a temporary reference. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/fpu: Re-add exception handling in load_fpu_state()
With the recent rewrite of the fpu code exception handling for the
lfpc instruction within load_fpu_state() was erroneously removed.
Add it again to prevent that loading invalid floating point register
values cause an unhandled specification exception. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/purgatory: align riscv_kernel_entry
When alignment handling is delegated to the kernel, everything must be
word-aligned in purgatory, since the trap handler is then set to the
kexec one. Without the alignment, hitting the exception would
ultimately crash. On other occasions, the kernel's handler would take
care of exceptions.
This has been tested on a JH7110 SoC with oreboot and its SBI delegating
unaligned access exceptions and the kernel configured to handle them. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he()
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup()
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace. |
| Inclusion of Functionality from Untrusted Control Sphere vulnerability in HCL MyXalytics. v6.6
allows Loading third-party scripts without integrity checks or validation can allow external code run in the application's context, risking data exposure. |
