| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow
Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Fix a resource leak related to the scp device in FW initialization
On Mediatek devices with a system companion processor (SCP) the mtk_scp
structure has to be removed explicitly to avoid a resource leak.
Free the structure in case the allocation of the firmware structure fails
during the firmware initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix net namespace reference leak in reload
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path. |
| A flaw in Node.js HTTP/2 server API can cause servers to keep accepting data even after sending a `GOAWAY` frame. This vulnerability affects two supported release lines: **Node.js 22** and **Node.js 24**. |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: Imperative Web Server). The supported version that is affected is 3.2.18. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Helidon. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in the Oracle Workflow product of Oracle E-Business Suite (component: Workflow Notification Mailer). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Workflow. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Workflow. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 25.0.4 and 26.0.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| An issue in Open5GS v.2.7.0 allows a remote attacker to cause a denial of service via the ngap_send_to_nas() function in src/amf/ngap-path.c |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to 10.27.2, the join filter in src/filters/array.ts computes complexity from array.length and separator length instead of the total string length produced by array.join(sep). The concat filter can cheaply double arrays of references, after which join materializes the referenced content while charging only for element count, allowing a template to exceed a configured memoryLimit by a large factor. The sibling array_to_sentence_string filter in src/filters/string.ts has the same accounting defect, and a crafted template can allocate toward V8's string or process memory limit and crash the process. This issue is fixed in version 10.27.2. |
| Mailpit is an email testing tool and API for developers. Prior to 1.30.4, Mailpit reads SMTP commands through internal/smtpd/smtpd.go session.readLine() using bufio.Reader.ReadString before session.parseLine() parses the verb or the RFC 5321 512-octet command-line limit is enforced. An unauthenticated remote SMTP client can send an oversized single command line that is fully allocated before syntax rejection or timeout, and the normal MaxMessageSize and DATA limits do not apply to this pre-DATA path. The same command reader is used by handleAuthLogin(), handleAuthPlain(), and handleAuthCramMD5() continuation lines, so concurrent oversized inputs can create memory pressure and reduce service availability. This issue is fixed in version 1.30.4. |
| Carbone is vulnerable to Denial of Service due to lack of protection against zip bombs when processing .docx files. The library uses yazl for zip decompression without validating entry sizes, allowing an attacker to supply a malicious .docx file containing a zip bomb that decompresses to a significantly larger size, causing excessive memory consumption and crashing the application server.
The issue was fixed in versions: 3.8.2, 4.26.3 and 5.4.4. The fix is available across all distribution types. |
| SiYuan before v3.7.4 contains an insufficient access control vulnerability in the /api/lute/spinBlockDOM endpoint, which is guarded only by CheckAuth middleware instead of CheckAdminRole like its sibling endpoint. Authenticated users with RoleEditor or RoleReader roles can invoke the endpoint to transform arbitrary DOM input, and large payloads cause endpoint starvation through per-path mutex serialization. |
| Wazuh 4.4.0 before 4.14.7 contains a denial of service vulnerability in the fdecompress_files() function within cluster.py that allows authenticated cluster peers to exhaust memory by supplying a malicious synchronization archive without decompressed size limits. Attackers holding a valid cluster Fernet key can upload a small, highly compressed zip bomb archive that forces wazuh-clusterd on the master node to decompress the full payload into memory, causing memory exhaustion and service disruption. |
| MobSF is a mobile application security testing tool used. Prior to 4.5.1, the unzip function in mobsf/StaticAnalyzer/views/common/shared_func.py logs that an archive member exceeding ZIP_MAX_UNCOMPRESSED_FILE_SIZE is being skipped but does not continue to the next member, so an authenticated user can upload a crafted ZIP or APK whose oversized member is extracted to disk when the aggregate ZIP_MAX_UNCOMPRESSED_TOTAL_SIZE limit has not yet been reached, potentially exhausting disk space and preventing further scans. This issue is fixed in version 4.5.1. |
| Coturn is a free open source implementation of TURN and STUN Server. In 4.15.0, an authenticated TURN user can repeatedly resume one allocation from fresh UDP 5-tuples without completing a handoff when the server enables --mobility. mobile_begin_transition() in src/server/ns_turn_server.c disarms each new session's allocation timeout and overwrites the allocation's single mobile_pending_resume link, leaving earlier pending sessions unreachable by the cleanup path, while copy_auth_parameters() ignores inc_quota() failure. The attacker can therefore retain unbounded server-side sessions and exhaust process memory even when --user-quota=1 is configured. This issue is fixed in version 4.16.0. |
| A denial-of-service vulnerability was identified in misp-stix when processing attacker-controlled STIX 1 or STIX 2 documents.
The STIX import code used sys.exit() to handle several parsing and loading failures. Because SystemExit inherits from BaseException rather than Exception, these failures bypassed the exception handlers used by callers of the library. As a result, a malformed STIX document could terminate a long-running importer process instead of returning a recoverable parsing error.
Additionally, no limit was imposed on the size of STIX documents before parsing. A submitted document was therefore read and materialised in memory before its validity or type was evaluated. Depending on the document and parsing path, processing could consume approximately two to seven times the input size in memory, allowing a sufficiently large STIX document to cause excessive memory and CPU consumption and potentially terminate or severely degrade the importing service.
An attacker able to provide STIX content to a MISP-STIX import workflow could exploit either condition to affect availability. A malformed document could cause abnormal process termination through an uncaught SystemExit, while a large document could exhaust resources during deserialisation and conversion.
The fixes replace process-terminating sys.exit() calls with catchable exceptions such as STIXLoadingError and MissingSTIXContentError, and extend exception handling around the complete STIX detection and conversion process. The importer also now enforces an input-size limit before parsing. The default maximum is 100 MB, can be adjusted by callers, and can explicitly be disabled when required. STIX 1 inputs are additionally checked for the expected root element before the complete XML tree is constructed.
ImpactSuccessful exploitation can cause:
* termination of a long-running MISP-STIX importer;
* excessive memory allocation;
* excessive CPU consumption;
* degradation or temporary unavailability of services relying on the converter;
* interruption of batch or automated STIX ingestion workflows. |
| ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0. |
