| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pgjdbc is an open source postgresql JDBC Driver. In affected versions a prepared statement using either `PreparedStatement.setText(int, InputStream)` or `PreparedStatemet.setBytea(int, InputStream)` will create a temporary file if the InputStream is larger than 2k. This will create a temporary file which is readable by other users on Unix like systems, but not MacOS. On Unix like systems, the system's temporary directory is shared between all users on that system. Because of this, when files and directories are written into this directory they are, by default, readable by other users on that same system. This vulnerability does not allow other users to overwrite the contents of these directories or files. This is purely an information disclosure vulnerability. Because certain JDK file system APIs were only added in JDK 1.7, this this fix is dependent upon the version of the JDK you are using. Java 1.7 and higher users: this vulnerability is fixed in 4.5.0. Java 1.6 and lower users: no patch is available. If you are unable to patch, or are stuck running on Java 1.6, specifying the java.io.tmpdir system environment variable to a directory that is exclusively owned by the executing user will mitigate this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix invalid FIFO access with special register set
When enabling access to the special register set, Receiver time-out and
RHR interrupts can happen. In this case, the IRQ handler will try to read
from the FIFO thru the RHR register at address 0x00, but address 0x00 is
mapped to DLL register, resulting in erroneous FIFO reading.
Call graph example:
sc16is7xx_startup(): entry
sc16is7xx_ms_proc(): entry
sc16is7xx_set_termios(): entry
sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set
sc16is7xx_port_irq() entry --> IIR is 0x0C
sc16is7xx_handle_rx() entry
sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is
mapped to DLL (LCR=LCR_CONF_MODE_A)
sc16is7xx_set_baud(): exit --> Restore access to general register set
Fix the problem by claiming the efr_lock mutex when accessing the Special
register set. |
| DHCP Server Service Information Disclosure Vulnerability |
| Software installed and running inside a Guest VM may override Firmware's state and gain access to the GPU. |
| PowerShell Information Disclosure Vulnerability |
| Open Management Infrastructure Information Disclosure Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
ipack: ipoctal: fix stack information leak
The tty driver name is used also after registering the driver and must
specifically not be allocated on the stack to avoid leaking information
to user space (or triggering an oops).
Drivers should not try to encode topology information in the tty device
name but this one snuck in through staging without anyone noticing and
another driver has since copied this malpractice.
Fixing the ABI is a separate issue, but this at least plugs the security
hole. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: change DMA direction while mapping reinjected packets
For fragmented packets, ath12k reassembles each fragment as a normal
packet and then reinjects it into HW ring. In this case, the DMA
direction should be DMA_TO_DEVICE, not DMA_FROM_DEVICE. Otherwise,
an invalid payload may be reinjected into the HW and
subsequently delivered to the host.
Given that arbitrary memory can be allocated to the skb buffer,
knowledge about the data contained in the reinjected buffer is lacking.
Consequently, there’s a risk of private information being leaked.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 |
| Meshtastic is an open source mesh networking solution. In affected firmware versions crafted packets over MQTT are able to appear as a DM in client to a node even though they were not decoded with PKC. This issue has been addressed in version 2.5.19 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Tyler Technologies ERP Pro 9 SaaS allows an authenticated user to escape the application and execute limited operating system commands within the remote Microsoft Windows environment with the privileges of the authenticated user. Tyler Technologies deployed hardened remote Windows environment settings to all ERP Pro 9 SaaS customer environments as of 2025-08-01. |
| The WebAssembly Micro Runtime's (WAMR) iwasm package is the executable binary built with WAMR VMcore which supports WebAssembly System Interface (WASI) and command line interface. In versions 2.4.0 and below, iwasm uses --addr-pool with an IPv4 address that lacks a subnet mask, allowing the system to accept all IP addresses. This can unintentionally expose the service to all incoming connections and bypass intended access restrictions. Services relying on --addr-pool for restricting access by IP may unintentionally become open to all external connections. This may lead to unauthorized access in production deployments, especially when users assume that specifying an IP without a subnet mask implies a default secure configuration. This is fixed in version 2.4.1. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix kernel warning when sending SYN message
When sending a SYN message, this kernel stack trace is observed:
...
[ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550
...
[ 13.398494] Call Trace:
[ 13.398630] <TASK>
[ 13.398630] ? __alloc_skb+0xed/0x1a0
[ 13.398630] tipc_msg_build+0x12c/0x670 [tipc]
[ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290
[ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc]
[ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc]
[ 13.398630] ? __local_bh_enable_ip+0x37/0x80
[ 13.398630] tipc_connect+0x1d9/0x230 [tipc]
[ 13.398630] ? __sys_connect+0x9f/0xd0
[ 13.398630] __sys_connect+0x9f/0xd0
[ 13.398630] ? preempt_count_add+0x4d/0xa0
[ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50
[ 13.398630] __x64_sys_connect+0x16/0x20
[ 13.398630] do_syscall_64+0x42/0x90
[ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd
It is because commit a41dad905e5a ("iov_iter: saner checks for attempt
to copy to/from iterator") has introduced sanity check for copying
from/to iov iterator. Lacking of copy direction from the iterator
viewpoint would lead to kernel stack trace like above.
This commit fixes this issue by initializing the iov iterator with
the correct copy direction when sending SYN or ACK without data. |
| A directory traversal within the ‘ftpservlet’ of the FileCatalyst Workflow Web Portal allows files to be uploaded outside of the intended ‘uploadtemp’ directory with a specially crafted POST request. In situations where a file is successfully uploaded to web portal’s DocumentRoot, specially crafted JSP files could be used to execute code, including web shells. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix info leak when fetching board id
Add the missing sanity check when fetching the board id to avoid leaking
slab data when later requesting the firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix info leak when fetching fw build id
Add the missing sanity checks and move the 255-byte build-id buffer off
the stack to avoid leaking stack data through debugfs in case the
build-info reply is malformed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix information leakage in /proc/net/ptype
In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.
Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL. |
| D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests. |
| TorchServe is a flexible and easy-to-use tool for serving and scaling PyTorch models in production. In affected versions the two gRPC ports 7070 and 7071, are not bound to [localhost](http://localhost/) by default, so when TorchServe is launched, these two interfaces are bound to all interfaces. Customers using PyTorch inference Deep Learning Containers (DLC) through Amazon SageMaker and EKS are not affected. This issue in TorchServe has been fixed in PR #3083. TorchServe release 0.11.0 includes the fix to address this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Moby is an open source container framework that is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. In 26.0.0, IPv6 is not disabled on network interfaces, including those belonging to networks where `--ipv6=false`. An container with an `ipvlan` or `macvlan` interface will normally be configured to share an external network link with the host machine. Because of this direct access, (1) Containers may be able to communicate with other hosts on the local network over link-local IPv6 addresses, (2) if router advertisements are being broadcast over the local network, containers may get SLAAC-assigned addresses, and (3) the interface will be a member of IPv6 multicast groups. This means interfaces in IPv4-only networks present an unexpectedly and unnecessarily increased attack surface. The issue is patched in 26.0.2. To completely disable IPv6 in a container, use `--sysctl=net.ipv6.conf.all.disable_ipv6=1` in the `docker create` or `docker run` command. Or, in the service configuration of a `compose` file. |
| Softing Secure Integration Server Exposure of Resource to Wrong Sphere Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Softing Secure Integration Server. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed.
The specific flaw exists within the handling of OPC FileDirectory namespaces. The issue results from the lack of proper validation of user-supplied data before using it to create a server object. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-20547. |
