| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate group add input before caching
[BUG]
OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in
ocfs2_set_new_buffer_uptodate():
kernel BUG at fs/ocfs2/uptodate.c:509!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509
Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df
Call Trace:
ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507
ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7bbfb55a966d
[CAUSE]
ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a
user-controlled group block before ocfs2_verify_group_and_input()
validates that block number. That helper is only valid for newly
allocated metadata and asserts that the block is not already present in
the chosen metadata cache. The code also uses INODE_CACHE(inode) even
though the group descriptor belongs to main_bm_inode and later journal
accesses use that cache context instead.
[FIX]
Validate the on-disk group descriptor before caching it, then add it to
the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the
validation failure path separate from the later cleanup path so we only
remove the buffer from that cache after it has actually been inserted.
This keeps the group buffer lifetime consistent across validation,
journaling, and cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: avoid reading already updated pages during GC
We found the following issue during fuzz testing:
page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9
memcg:f8ffff800e269c00
aops:f2fs_meta_aops ino:2
flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a)
raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618
raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00
page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio))
page_owner tracks the page as allocated
post_alloc_hook+0x58c/0x5ec
prep_new_page+0x34/0x284
get_page_from_freelist+0x2dcc/0x2e8c
__alloc_pages_noprof+0x280/0x76c
__folio_alloc_noprof+0x18/0xac
__filemap_get_folio+0x6bc/0xdc4
pagecache_get_page+0x3c/0x104
do_garbage_collect+0x5c78/0x77a4
f2fs_gc+0xd74/0x25f0
gc_thread_func+0xb28/0x2930
kthread+0x464/0x5d8
ret_from_fork+0x10/0x20
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1563!
folio_end_read+0x140/0x168
f2fs_finish_read_bio+0x5c4/0xb80
f2fs_read_end_io+0x64c/0x708
bio_endio+0x85c/0x8c0
blk_update_request+0x690/0x127c
scsi_end_request+0x9c/0xb8c
scsi_io_completion+0xf0/0x250
scsi_finish_command+0x430/0x45c
scsi_complete+0x178/0x6d4
blk_mq_complete_request+0xcc/0x104
scsi_done_internal+0x214/0x454
scsi_done+0x24/0x34
which is similar to the problem reported by syzbot:
https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc
This case is consistent with the description in commit 9bf1a3f
("f2fs: avoid GC causing encrypted file corrupted"):
Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after
being written it is marked as uptodate. Then, Page 1 is moved from blkaddr
B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by
ra_data_block.
There is no need to read Page 1 again from blkaddr B, since it has already
been updated. Therefore, avoid initiating I/O in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg
In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already
set by another thread, __nfs4_file_get_access should not be called
to increment the nfs4_file access count since that was already done
by the thread that added READ access to the file. The extra fi_access
count in nfs4_file can prevent the corresponding nfsd_file from being
freed.
When stopping nfs-server service, these extra access counts trigger a
BUG in kmem_cache_destroy() that shows nfsd_file object remaining on
__kmem_cache_shutdown.
This problem can be reproduced by running the Git project's test
suite over NFS. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix integer overflow in UNMAP bounds check
sbc_execute_unmap() checks LBA + range does not exceed the device capacity,
but does not guard against LBA + range wrapping around on 64-bit overflow.
Add an overflow check matching the pattern already used for WRITE_SAME in
the same file. |
| In the Linux kernel, the following vulnerability has been resolved:
pppoe: drop PFC frames
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the current PPPoE driver assumes an
uncompressed (2-byte) protocol field. However, the generic PPP layer
function ppp_input() is not aware of the negotiation result, and still
accepts PFC frames.
If a peer with a broken implementation or an attacker sends a frame with
a compressed (1-byte) protocol field, the subsequent PPP payload is
shifted by one byte. This causes the network header to be 4-byte
misaligned, which may trigger unaligned access exceptions on some
architectures.
To reduce the attack surface, drop PPPoE PFC frames. Introduce
ppp_skb_is_compressed_proto() helper function to be used in both
ppp_generic.c and pppoe.c to avoid open-coding. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Drop all SCM attributes for SOCKMAP.
SOCKMAP can hide inflight fd from AF_UNIX GC.
When a socket in SOCKMAP receives skb with inflight fd,
sk_psock_verdict_data_ready() looks up the mapped socket and
enqueue skb to its psock->ingress_skb.
Since neither the old nor the new GC can inspect the psock
queue, the hidden skb leaks the inflight sockets. Note that
this cannot be detected via kmemleak because inflight sockets
are linked to a global list.
In addition, SOCKMAP redirect breaks the Tarjan-based GC's
assumption that unix_edge.successor is always alive, which
is no longer true once skb is redirected, resulting in
use-after-free below. [0]
Moreover, SOCKMAP does not call scm_stat_del() properly,
so unix_show_fdinfo() could report an incorrect fd count.
sk_msg_recvmsg() does not support any SCM attributes in the
first place.
Let's drop all SCM attributes before passing skb to the
SOCKMAP layer.
[0]:
BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
Read of size 8 at addr ffff888125362670 by task kworker/56:1/496
CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379)
kasan_report (mm/kasan/report.c:597)
unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
unix_destroy_fpl (net/unix/garbage.c:317)
unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976)
sk_psock_backlog (./include/linux/skbuff.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
</TASK>
Allocated by task 955:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
__kasan_slab_alloc (mm/kasan/common.c:369)
kmem_cache_alloc_noprof (mm/slub.c:4539)
sk_prot_alloc (net/core/sock.c:2240)
sk_alloc (net/core/sock.c:2301)
unix_create1 (net/unix/af_unix.c:1099)
unix_create (net/unix/af_unix.c:1169)
__sock_create (net/socket.c:1606)
__sys_socketpair (net/socket.c:1811)
__x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860)
do_syscall_64 (arch/x86/entry/syscall_64.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 496:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kmem_cache_free (mm/slub.c:6165)
__sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384)
sk_psock_destroy (./include/net/sock.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258) |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open
ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount
incremented via ksmbd_fp_get(). parse_durable_handle_context() in
the DURABLE_REQ_V2 case properly releases this reference on every
path inside the ClientGUID-match branch, either by calling
ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp
for a successful reconnect. However, when an entry exists in the
global file table with the same CreateGuid but a different
ClientGUID, the code simply falls through to the new-open path
without dropping the reference obtained from ksmbd_lookup_fd_cguid().
Per MS-SMB2 section 3.3.5.9.10 ("Handling the
SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server
MUST locate an Open whose Open.CreateGuid matches the request's
CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the
connection that received the request. If no such Open is found, the
server MUST continue with the normal open execution phase. A
CreateGuid hit with a ClientGUID mismatch is therefore the
"Open not found" case: proceeding with a new open is correct, but
the reference obtained purely as a side effect of the lookup must
not be leaked.
Repeated requests that hit this mismatch pin global_ft entries,
prevent __ksmbd_close_fd() from ever running for the corresponding
files, and defeat the durable scavenger, leading to long-lived
resource leaks.
Release the reference in the mismatch path and clear dh_info->fp so
subsequent logic does not mistake a non-matching lookup result for
a reconnect target. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
The nf_osf_ttl() function accessed skb->dev to perform a local interface
address lookup without verifying that the device pointer was valid.
Additionally, the implementation utilized an in_dev_for_each_ifa_rcu
loop to match the packet source address against local interface
addresses. It assumed that packets from the same subnet should not see a
decrement on the initial TTL. A packet might appear it is from the same
subnet but it actually isn't especially in modern environments with
containers and virtual switching.
Remove the device dereference and interface loop. Replace the logic with
a switch statement that evaluates the TTL according to the ttl_check. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Reject wrapped offset in kvm_reset_dirty_gfn()
kvm_reset_dirty_gfn() guards the gfn range with
if (!memslot || (offset + __fls(mask)) >= memslot->npages)
return;
but offset is u64 and the addition is unchecked. The check can be
silently bypassed by a u64 wrap.
The dirty ring backing those entries is MAP_SHARED at
KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the
slot and offset fields of any entry between when the kernel pushes
them and when KVM_RESET_DIRTY_RINGS consumes them. On reset,
kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds
them straight back into this check; only the flags handshake is
treated as the handover, the slot/offset payload is taken on trust.
Crafting two entries
entry[i].offset = 0xffffffffffffffc1
entry[i+1].offset = 0
makes the coalescing loop in kvm_dirty_ring_reset() compute
delta = (s64)(0 - 0xffffffffffffffc1) = 63
which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the
existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn()
call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63;
the sum is 0 in u64 and the bounds check passes.
That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked()
unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() ==
true, i.e. shadow paging, any VM that has allocated shadow roots, or
a write-tracked slot -- it reaches gfn_to_rmap(), which indexes
slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an
out-of-bounds load of a kvm_rmap_head, followed by a conditional
clear of PT_WRITABLE_MASK in whatever the loaded pointer points at.
The path is reachable from any process holding /dev/kvm.
Range-check offset on its own first, so the addition cannot wrap.
memslot->npages is bounded well below U64_MAX, so once offset <
npages holds, offset + __fls(mask) (with __fls(mask) < BITS_PER_LONG)
stays in range. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix BQL imbalance in TX path
Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight
packets are accounted only for the AIROHA_NUM_TX_RING netdev TX
queues. The queue index is computed as:
qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx)
txq = netdev_get_tx_queue(dev, qid);
However, airoha_qdma_tx_napi_poll() accounts completions across all
netdev TX queues (num_tx_queues), leading to inconsistent BQL
accounting.
Also reset all netdev TX queues in the ndo_stop callback. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: fix queue limit check to include reordered packets
The queue limit check in netem_enqueue() uses q->t_len which only
counts packets in the internal tfifo. Packets placed in sch->q by
the reorder path (__qdisc_enqueue_head) are not counted, allowing
the total queue occupancy to exceed sch->limit under reordering.
Include sch->q.qlen in the limit check. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
populate_enum_data() aggregates firmware-provided value-modifier
and possible-value strings into fixed 512-byte struct members.
The current code bounds each individual source string but then
appends every string and separator with raw strcat() and no
remaining-space check.
Switch the aggregation loops to a bounded append helper and
reject enumeration packages whose combined strings do not fit
in the destination buffers.
[ij: add include] |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally. |
