| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: Avoid boot crash in RedBoot partition table parser
Given CONFIG_FORTIFY_SOURCE=y and a recent compiler,
commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when
available") produces the warning below and an oops.
Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000
------------[ cut here ]------------
WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1
memcmp: detected buffer overflow: 15 byte read of buffer size 14
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE
As Kees said, "'names' is pointing to the final 'namelen' many bytes
of the allocation ... 'namelen' could be basically any length at all.
This fortify warning looks legit to me -- this code used to be reading
beyond the end of the allocation."
Since the size of the dynamic allocation is calculated with strlen()
we can use strcmp() instead of memcmp() and remain within bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: fix race condition in qman_destroy_fq
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/rose: fix NULL pointer dereference in rose_transmit_link on reconnect
syzkaller reported a bug [1], and the reproducer is available at [2].
ROSE sockets use four sk->sk_state values: TCP_CLOSE, TCP_LISTEN,
TCP_SYN_SENT, and TCP_ESTABLISHED. rose_connect() already rejects
calls for TCP_ESTABLISHED (-EISCONN) and TCP_CLOSE with SS_CONNECTING
(-ECONNREFUSED), but lacks a check for TCP_SYN_SENT.
When rose_connect() is called a second time while the first connection
attempt is still in progress (TCP_SYN_SENT), it overwrites
rose->neighbour via rose_get_neigh(). If that returns NULL, the socket
is left with rose->state == ROSE_STATE_1 but rose->neighbour == NULL.
When the socket is subsequently closed, rose_release() sees
ROSE_STATE_1 and calls rose_write_internal() ->
rose_transmit_link(skb, NULL), causing a NULL pointer dereference.
Per connect(2), a second connect() while a connection is already in
progress should return -EALREADY. Add this missing check for
TCP_SYN_SENT to complete the state validation in rose_connect().
[1] https://syzkaller.appspot.com/bug?extid=d00f90e0af54102fb271
[2] https://gist.github.com/mrpre/9e6779e0d13e2c66779b1653fef80516 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardown
A potential race condition exists in mana_hwc_destroy_channel() where
hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and
Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt
handler to dereference freed memory, leading to a use-after-free or
NULL pointer dereference in mana_hwc_handle_resp().
mana_smc_teardown_hwc() signals the hardware to stop but does not
synchronize against IRQ handlers already executing on other CPUs. The
IRQ synchronization only happens in mana_hwc_destroy_cq() via
mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs
after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()
can dereference freed caller_ctx (and rxq->msg_buf) in
mana_hwc_handle_resp().
Fix this by reordering teardown to reverse-of-creation order: destroy
the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This
ensures all in-flight interrupt handlers complete before the memory they
access is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: runtime: Fix a race condition related to device removal
The following code in pm_runtime_work() may dereference the dev->parent
pointer after the parent device has been freed:
/* Maybe the parent is now able to suspend. */
if (parent && !parent->power.ignore_children) {
spin_unlock(&dev->power.lock);
spin_lock(&parent->power.lock);
rpm_idle(parent, RPM_ASYNC);
spin_unlock(&parent->power.lock);
spin_lock(&dev->power.lock);
}
Fix this by inserting a flush_work() call in pm_runtime_remove().
Without this patch blktest block/001 triggers the following complaint
sporadically:
BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160
Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x8b/0x310
print_report+0xfd/0x1d7
kasan_report+0xd8/0x1d0
__kasan_check_byte+0x42/0x60
lock_acquire.part.0+0x38/0x230
lock_acquire+0x70/0x160
_raw_spin_lock+0x36/0x50
rpm_suspend+0xc6a/0xfe0
rpm_idle+0x578/0x770
pm_runtime_work+0xee/0x120
process_one_work+0xde3/0x1410
worker_thread+0x5eb/0xfe0
kthread+0x37b/0x480
ret_from_fork+0x6cb/0x920
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_alloc_info+0x3d/0x50
__kasan_kmalloc+0xa0/0xb0
__kmalloc_noprof+0x311/0x990
scsi_alloc_target+0x122/0xb60 [scsi_mod]
__scsi_scan_target+0x101/0x460 [scsi_mod]
scsi_scan_channel+0x179/0x1c0 [scsi_mod]
scsi_scan_host_selected+0x259/0x2d0 [scsi_mod]
store_scan+0x2d2/0x390 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
do_syscall_64+0xee/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_free_info+0x3f/0x50
__kasan_slab_free+0x67/0x80
kfree+0x225/0x6c0
scsi_target_dev_release+0x3d/0x60 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_dev_release+0xacf/0x12c0 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_put+0x7f/0xc0 [scsi_mod]
sdev_store_delete+0xa5/0x120 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu()
l3mdev_master_dev_rcu() can return NULL when the slave device is being
un-slaved from a VRF. All other callers deal with this, but we lost
the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu()
with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on
device with address").
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418)
Call Trace:
ip6_pol_route (net/ipv6/route.c:2318)
fib6_rule_lookup (net/ipv6/fib6_rules.c:115)
ip6_route_output_flags (net/ipv6/route.c:2607)
vrf_process_v6_outbound (drivers/net/vrf.c:437)
I was tempted to rework the un-slaving code to clear the flag first
and insert synchronize_rcu() before we remove the upper. But looks like
the explicit fallback to loopback_dev is an established pattern.
And I guess avoiding the synchronize_rcu() is nice, too. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix refcount leak for tagset_refcnt
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef |
| In the Linux kernel, the following vulnerability has been resolved:
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: properly drop the usb interface reference on disconnect
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
Fix a user triggerable leak on the system call failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix null-ptr-deref in lec_arp_clear_vccs
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit
through slave devices, but does not update skb->dev to the slave device
beforehand.
When a gretap tunnel is a TEQL slave, the transmit path reaches
iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0
master) and later calls iptunnel_xmit_stats(dev, pkt_len). This
function does:
get_cpu_ptr(dev->tstats)
Since teql_master_setup() does not set dev->pcpu_stat_type to
NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats
for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes
NULL + __per_cpu_offset[cpu], resulting in a page fault.
BUG: unable to handle page fault for address: ffff8880e6659018
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 68bc067 P4D 68bc067 PUD 0
Oops: Oops: 0002 [#1] SMP KASAN PTI
RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89)
Call Trace:
<TASK>
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
__gre_xmit (net/ipv4/ip_gre.c:478)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
teql_master_xmit (net/sched/sch_teql.c:319)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
neigh_direct_output (net/core/neighbour.c:1660)
ip_finish_output2 (net/ipv4/ip_output.c:237)
__ip_finish_output.part.0 (net/ipv4/ip_output.c:315)
ip_mc_output (net/ipv4/ip_output.c:369)
ip_send_skb (net/ipv4/ip_output.c:1508)
udp_send_skb (net/ipv4/udp.c:1195)
udp_sendmsg (net/ipv4/udp.c:1485)
inet_sendmsg (net/ipv4/af_inet.c:859)
__sys_sendto (net/socket.c:2206)
Fix this by setting skb->dev = slave before calling
netdev_start_xmit(), so that tunnel xmit functions see the correct
slave device with properly allocated tstats. |
