| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Determined a bug and not a vulnerability |
| Determined not a vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Enforce that teql can only be used as root qdisc
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF. |
| A flaw was found in the GNOME localsearch (previously known as tracker-miners) MP3 Extractor `tracker-extract-mp3` component. A remote attacker could exploit this heap buffer overflow vulnerability by providing a specially crafted MP3 file containing malformed ID3 tags. This incorrect length calculation during the parsing of performer tags can lead to a read beyond the allocated buffer, potentially causing a Denial of Service (DoS) due to a crash or enabling information disclosure. |
| A flaw was found in GNOME localsearch (previously known as tracker-miners) MP3 Extractor, specifically within the tracker-extract-mp3 component. This heap buffer overflow vulnerability occurs when processing specially crafted MP3 files containing malformed ID3v2.3 COMM (Comment) tags. An attacker could exploit this by providing a malicious MP3 file, leading to a denial of service (DoS), which causes an application crash, and potentially disclosing sensitive information from the heap memory. |
| OpenClaw before 2026.5.12 contains a notification bypass vulnerability allowing Slack reaction events to enter the agent pipeline despite disabled reaction notifications. Attackers can trigger unintended agent processing by sending reaction events when the feature is enabled, potentially leading to unauthorized processing of lower-trust input. |
| A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability in SQL Expressions allows an authenticated attacker to read arbitrary files from the Grafana server's filesystem. Only instances with the sqlExpressions feature toggle enabled are vulnerable. |
| OpenClaw before 2026.4.29 contains a session visibility check bypass vulnerability in shared memory search that allows authenticated callers to access memory entries without proper authorization. Attackers can skip session visibility guards on the search path to retrieve memory entries that should not be visible to their session. |
| OpenClaw before 2026.5.12 contains an argument pattern validation bypass in the exec allowlist that allows attackers to execute disallowed arguments for allowlisted executables on Linux and macOS systems. Attackers can bypass configured argPattern restrictions by directly invoking allowlisted executables with unrestricted arguments, potentially enabling unauthorized file access, network access, or command execution. |
| OpenClaw before 2026.4.25 contains a control scope enforcement bypass vulnerability in the focus command that allows authenticated callers to execute the command without proper authorization checks. Attackers can trigger the focus command to change focus state outside intended caller authority, potentially enabling unauthorized operations depending on gateway configuration and input trust levels. |
| MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.26, 10.11.1 to before 10.11.17, 11.4.1 to before 11.4.11, 11.8.1 to before 11.8.7, and 12.3.1, MariaDB allowed SELECT ... INTO OUTFILE and SELECT ... INTO DUMPFILE without verifying the FILE privilege if the FROM clause contained only subqueries. This issue has been patched in versions 10.6.26, 10.11.17, 11.4.11, 11.8.7, and 12.3.2. |
| Moby is an open source container framework. In Docker Engine prior to version 29.5.1, Docker Daemon versions 28.5.2 and prior, and Moby Daemon prior to version 2.0.0-beta.14, a race condition during docker cp mount setup allows a malicious container to create empty files or directories at arbitrary absolute paths on the host filesystem. This issue has been patched in Docker Engine version 29.5.1 and Moby Daemon version 2.0.0-beta.14. |
| OpenClaw before 2026.5.7 contains a sender policy bypass vulnerability in BlueBubbles that allows participants to match allowlist entries through conversation metadata rather than stable sender identity. Attackers can influence conversation-level identifiers to receive agent responses intended for configured senders, potentially bypassing access controls. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Reinstate disabling of BHs around IRQ handler
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28 |
| Subscriber Broken Access Control in RepairBuddy <= 4.1132 versions. |
| Subscriber SQL Injection in Attendance Manager <= 0.6.2 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, alloc_frozen_pages_nolock() called from NMI context can
re-enter rmqueue() and acquire the zone lock that the interrupted
context is already holding, corrupting the freelists.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
rmqueue.isra.0+0x2a9/0xa70
get_page_from_freelist+0xeb/0x450
alloc_frozen_pages_nolock_noprof+0x111/0x1e0
allocate_slab+0x42a/0x500
___slab_alloc+0xa7/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| The WooCommerce Stripe Payment Gateway plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `ajax_pay_for_order()` function in all versions up to, and including, 10.7.0 This is due to a missing order ownership or order_key verification when processing payment for an order via the `wc_stripe_pay_for_order` WC-AJAX endpoint. The function only validates a nonce (which is publicly available on any WooCommerce page where Express Checkout is enabled), but does not verify that the requesting user owns the target order and is allowed to modify it. This makes it possible for unauthenticated attackers to force any pending order into a failed status by providing a fake payment method, causing a payment exception that updates the order status to "failed" via sequential order ID enumeration. |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, a program able to write bytes to a kitty terminal — a remote SSH peer, a downloaded file viewed with `cat`, a log line, an email body rendered in `less`, an issue body in a TUI, etc. — can cause kitty to execute attacker-supplied Python inside the running kitty process, with the user's full privileges. There is no approval prompt, no remote-control permission requirement, no shell-integration interaction, no clipboard touch, and no editor interaction. Version 0.47.0 fixes the issue. |
