| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw has been discovered in Kingston FURY CTRL RGB Control Software 2.0.65.0. The impacted element is an unknown function in the library NTIOLib_KSFX.sys of the component Driver. Performing a manipulation results in improper privilege management. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The method "sock_recvfrom_into()" of "asyncio.ProacterEventLoop" (Windows only) was missing a boundary check for the data buffer when using nbytes parameter. This allowed for an out-of-bounds buffer write if data was larger than the buffer size. Non-Windows platforms are not affected. |
| A vulnerability was identified in Mullvad wireguard.sys 0.10.1. The affected element is the function AdapterState of the component IOCTL Handler. Such manipulation leads to improper update of reference count. Local access is required to approach this attack. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. |
| A vulnerability was determined in EFM ipTIME AX8004M 15.09.0. Impacted is the function popen of the file /cgi/d.cgi of the component CGI Endpoint. This manipulation of the argument fname causes os command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in code-projects Task Management System 1.0. This issue affects some unknown processing of the file /user/CommentSave.php. The manipulation of the argument comment/task_id/mineId/recId/myName/myImage results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| A vulnerability has been found in Uasoft Badaso 3.0.0-alpha. This vulnerability affects the function ApiRequest::class of the file src/Routes/api.php of the component File API. The manipulation leads to permission issues. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in dmitriiweb article-scraper-mcp 1.0.0. This vulnerability affects the function fetch_article of the file news_scraper_mcp/server.py. The manipulation of the argument url results in server-side request forgery. The attack may be performed from remote. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A security vulnerability has been detected in adafap api-mcp up to 92b9a5d04acfec165c7d4ef852496593aa87be06. This affects the function customAxios of the file app/api/proxy/route.ts of the component Proxy API Endpoint. The manipulation of the argument url leads to server-side request forgery. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in PhialsBasement KoboldCPP-MCP-Server 1.0.0. Affected by this issue is the function makeRequest of the file src/index.ts of the component BaseConfigSchema. Executing a manipulation of the argument apiUrl can lead to server-side request forgery. It is possible to launch the attack on the local host. The project was informed of the problem early through an issue report but has not responded yet. |
| A security flaw has been discovered in Handwriting-OCR handwriting-ocr-mcp-server 0.1.0. Affected by this vulnerability is the function fs.readFileSync of the file src/index.ts of the component upload_document. Performing a manipulation of the argument File results in path traversal. Attacking locally is a requirement. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in Nikolaibibo claude-comfyui-mcp 1.0.0. Affected is the function copyFileSync of the file src/tools/utils.ts of the component comfy_upload_image. Such manipulation of the argument image_path leads to path traversal. An attack has to be approached locally. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in bartekke8it56w2 new-mcp 0.1.0. This impacts the function fs.writeFileSync/fs.existsSync/fs.readFileSync of the file index.ts of the component geminithinking. This manipulation of the argument sessionCommand/sessionPath causes path traversal. The attack requires local access. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in KS-GEN-AI jira-mcp-server 0.2.0. This affects the function axios.get of the file src/index.ts of the component add_attachment_from_public_url. The manipulation of the argument imageUrl results in server-side request forgery. The attack requires a local approach. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in PV-Bhat gemsuite-mcp 1.0.0. Affected by this issue is some unknown functionality of the file src/handlers/unified-gemini.ts of the component gemini_search/gemini_reason/gemini_process/gemini_analyze. The manipulation of the argument file_path/file_paths results in path traversal. The attack must be initiated from a local position. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in NocteDefensor LudusMCP 1.0.24. Affected by this vulnerability is an unknown functionality of the file src/tools/rangeConfig.ts of the component read_range_config. The manipulation of the argument Source leads to server-side request forgery. The attack may be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in NocteDefensor LudusMCP up to 1.0.24. Affected is an unknown function of the file src/tools/insertCredsRangeConfig.ts of the component insert_creds_range_config. Executing a manipulation of the argument configPath/outputPath can lead to path traversal. The attack is restricted to local execution. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: drain bus_reset work on device removal
brcmf_fw_crashed() and the debugfs "reset" entry both schedule
drvr->bus_reset, whose callback recovers drvr through container_of()
and dereferences it. The removal path frees drvr (brcmf_free ->
wiphy_free) without draining the work, so a bus_reset callback pending
or running during removal can outlive drvr.
Cancellation cannot live in brcmf_detach() or brcmf_free(): the work
callback reaches teardown through the bus .reset op (PCIe
brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->
brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for
the running work and deadlock.
Add a per-bus mutex (bus_reset_lock) and route all arming through
brcmf_bus_schedule_reset(), which under the lock skips when the bus is
marked removing. Each bus remove entry calls
brcmf_bus_cancel_reset_work(), which under the same lock sets removing
and cancels the work. Holding the mutex across cancel_work_sync() makes
the set-removing + drain step atomic. Every producer reaches the arming
path from process context -- the PCIe firmware-halt notification runs in
the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail
path runs from the data workqueue -- so the mutex is taken only in
sleepable contexts. Where applicable the remove entry first stops the
firmware-crash producer: on PCIe mask the mailbox and synchronize_irq;
on SDIO unregister the bus interrupt and cancel the data worker, which
also reports firmware halts through brcmf_fw_crashed(). The mutex is
initialized at bus allocation. The SDIO suspend power-off path frees
drvr through the same brcmf_sdiod_remove() and takes the same lock;
resume re-allows the work only on a successful re-probe.
Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire
before brcmf_attach() wires up drvr, and it dereferences drvr
(bphy_err/brcmf_dev_coredump) before reaching the arming gate.
The bus_reset work is shared across buses, so the drain is applied to
every remove path: PCIe (the .reset op introduced by the Fixes commit),
SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the
debugfs "reset" entry). cancel_work_sync() drains a running or pending
bus_reset work item before removal frees drvr, and patch 1/2 makes the
scratch-buffer release safe when reset teardown has already released
those DMA buffers.
This patch fixes the lifetime of the bus_reset work item itself. It does
not attempt to address the separate, pre-existing lifetime of the
asynchronous firmware completion started by the PCIe reset path. That
callback needs its own lifetime/ownership protocol and is being tracked
separately.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
rhashtable: clear stale iter->p on table restart
rhashtable_walk_start_check() has two restart paths when resuming a walk.
When iter->walker.tbl is valid, it re-validates iter->p against the table
and sets iter->p = NULL if the object is gone. When iter->walker.tbl is
NULL (table was freed during resize), it resets slot and skip but forgets
to clear iter->p.
rhashtable_walk_next() then dereferences the stale iter->p, reading
freed memory. This is a use-after-free.
Any caller that does multi-fragment rhashtable walks across
walk_stop/walk_start boundaries is affected. Concrete cases include
netlink_diag (__netlink_diag_dump in net/netlink/diag.c) and TIPC
(tipc_nl_sk_walk in net/tipc/socket.c).
Crash stack (netlink_diag):
BUG: KASAN: slab-use-after-free in rhashtable_walk_next+0x365/0x3c0
Read of size 8 at addr ffff88801a9d2438 (freed kmalloc-2k, offset 1080)
Call Trace:
rhashtable_walk_next+0x365/0x3c0 (lib/rhashtable.c:1016)
__netlink_diag_dump+0x160/0x760 (net/netlink/diag.c:122)
netlink_diag_dump+0xc2/0x240
netlink_dump+0x5bc/0x1270
netlink_recvmsg+0x7a3/0x980
sock_recvmsg+0x1bc/0x200
__sys_recvfrom+0x1d4/0x2c0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-dj: Fix maxfield check in DJ short report validation
Commit b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") added validation for the DJ short
output report, but the error path dereferences rep->field[0] even when
rep->maxfield is zero.
Commit 8b9a097eb2fc ("HID: logitech-dj: fix wrong detection of bad
DJ_SHORT output report") made the check conditional on rep being present,
but a crafted descriptor can still create report ID 0x20 with only padding
output items. hid-core registers the report, ignores the padding field,
and leaves rep->maxfield as zero.
In that case the validation enters the rep->maxfield < 1 branch and then
dereferences rep->field[0]->report_count while printing the error message,
causing a NULL pointer dereference during probe. This is reproducible with
uhid by emulating a Logitech receiver with a padding-only DJ short output
report:
BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
Read of size 4 at addr 0000000000000028 by task kworker/4:1/129
...
Call Trace:
logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
hid_device_probe+0x329/0x3f0 [hid]
really_probe+0x162/0x570
__device_attach+0x137/0x2c0
bus_probe_device+0x38/0xc0
device_add+0xa56/0xce0
hid_add_device+0x19c/0x280 [hid]
uhid_device_add_worker+0x2c/0xb0 [uhid]
Reject the zero-field report before printing the field report_count. |
