| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NVIDIA NVFlare Dashboard contains a vulnerability in the user management and authentication system where an unauthenticated attacker may cause authorization bypass through user-controlled key. A successful exploit of this vulnerability may lead to privilege escalation, data tampering, information disclosure, code execution, and denial of service. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.39 to before 0.10.78, EVP_DigestFinal() always writes EVP_MD_CTX_size(ctx) to the out buffer. If out is smaller than that, MdCtxRef::digest_final() writes past its end, usually corrupting the stack. This is reachable from safe Rust. This vulnerability is fixed in 0.10.78. |
| Protection mechanism failure in Windows Shell allows an unauthorized attacker to perform spoofing over a network. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From to before 0.10.78, aes::unwrap_key() contains an incorrect assertion: it checks that out.len() + 8 <= in_.len(), but this condition is reversed. The intended invariant is out.len() >= in_.len() - 8, ensuring the output buffer is large enough. Because of the inverted check, the function only accepts buffers at or below the minimum required size and rejects larger ones. If a smaller buffer is provided the function will write past the end of out by in_.len() - 8 - out.len() bytes, causing an out-of-bounds write from a safe public function. This vulnerability is fixed in 0.10.78. |
| Improper verification of cryptographic signature in ASP.NET Core allows an unauthorized attacker to elevate privileges over a network. |
| Processing specially crafted workspace folder names could allow for arbitrary command injection in the Kiro GitLab Merge-Request helper in Kiro IDE before version 0.6.18 when opening maliciously crafted workspaces.
To mitigate, users should update to the latest version. |
| A vulnerability in GRASSMARLIN v3.2.1 allows crafted session data to
trigger improper handling of XML input, which may result in unintended
exposure of sensitive information. The flaw stems from insufficient
hardening of the XML parsing process. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/rtnetlink.c:6989)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585)
___sys_sendmsg (net/socket.c:2641)
__sys_sendmsg (net/socket.c:2671)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048 |
| Improper
access control in the vault documentation feature in Devolutions Server
2026.1.14.0 and earlier allows an authenticated attacker to read documentation content from unauthorized vaults via a crafted API request. |
| The Carlson VASCO-B GNSS Receiver lacks an authentication mechanism,
allowing an attacker with network access to directly access and modify
its configuration and operational functions without needing credentials. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.0 to before 0.10.78, the *_from_pem_callback APIs did not validate the length returned by the user's callback. A password callback that returns a value larger than the buffer it was given can cause some versions of OpenSSL to over-read this buffer. OpenSSL 3.x is not affected by this. This vulnerability is fixed in 0.10.78. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.27 to before 0.10.78, Deriver::derive (and PkeyCtxRef::derive) sets len = buf.len() and passes it as the in/out length to EVP_PKEY_derive, relying on OpenSSL to honor it. On OpenSSL 1.1.x, X25519, X448, DH and HKDF-extract ignore the incoming *keylen, unconditionally writing the full shared secret (32/56/prime-size bytes). A caller passing a short slice gets a heap/stack overflow from safe code. OpenSSL 3.x providers do check, so this only impacts older OpenSSL. This vulnerability is fixed in 0.10.78. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in Themepaste Admin Safety Guard admin-safety-guard allows Password Recovery Exploitation.This issue affects Admin Safety Guard: from n/a through <= 1.2.6. |
| A security vulnerability has been detected in o2oa up to 10.0. This impacts the function syncFile of the file NodeAgent.java of the component NodeAgent. The manipulation leads to improper authorization. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| A flaw was found in GIMP. A remote attacker could exploit an integer overflow vulnerability in the FITS image loader by providing a specially crafted FITS file. This integer overflow leads to a zero-byte memory allocation, which is then subjected to a heap buffer overflow when processing pixel data. Successful exploitation could result in a denial of service (DoS) or potentially arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.
The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.
Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.
Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: fix skb leak with espintcp and async crypto
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
A broken/bored/mean USB host can overflow the skb_shared_info->frags[]
array on a Linux gadget exposing a Phonet function by sending an
unbounded sequence of full-page OUT transfers.
pn_rx_complete() finalizes the skb only when req->actual < req->length,
where req->length is set to PAGE_SIZE by the gadget. If the host always
sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be
reset and each completion will add another fragment via
skb_add_rx_frag(). Once nr_frags exceeds MAX_SKB_FRAGS (default 17),
subsequent frag stores overwrite memory adjacent to the shinfo on the
heap.
Drop the skb and account a length error when the frag limit is reached,
matching the fix applied in t7xx by commit f0813bcd2d9d ("net: wwan:
t7xx: fix potential skb->frags overflow in RX path"). |
| openITCOCKPIT is an open source monitoring tool built for different monitoring engines. openITCOCKPIT Community Edition prior to version 5.5.2 contains a command injection vulnerability that allows an authenticated user with permission to add or modify hosts to execute arbitrary OS commands on the monitoring backend. The vulnerability arises because user-controlled host attributes (specifically the host address) are expanded into monitoring command templates without validation, escaping, or quoting. These templates are later executed by the monitoring engine (Nagios/Icinga) via a shell, resulting in remote code execution. Version 5.5.2 patches the issue. |
