| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setRemoteCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument enable can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability was determined in SourceCodester Indian Invoicing System 1.0. Impacted is an unknown function of the component Backend Endpoint. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Multiple endpoints are affected. |
| A flaw has been found in code-projects Employee Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /changepassemp.php. Executing a manipulation of the argument ID can lead to cross site scripting. The attack may be performed from remote. The exploit has been published and may be used. |
| A weakness has been identified in Edimax EW-7438RPn 1.31. The affected element is the function formWlanMP of the file /goform/formWlanMP of the component Content-Type Handler. Executing a manipulation of the argument ateFunc/ateGain/ateTxCount/ateChan/ateRate/ateMacID/e2pTxPower1/e2pTxPower2/e2pTxPower3/e2pTxPower4/e2pTxPower5/e2pTxPower6/e2pTxPower7/e2pTx2Power1/e2pTx2Power2/e2pTx2Power3/e2pTx2Power4/e2pTx2Power5/e2pTx2Power6/e2pTx2Power7/ateTxFreqOffset/ateMode/ateBW/ateAntenna/e2pTxFreqOffset/e2pTxPwDeltaB/e2pTxPwDeltaG/e2pTxPwDeltaMix/e2pTxPwDeltaN/readE2P can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Magic Link authentication flow accepts multiple invalid authentication requests without adequate rate limiting or resource control, leading to uncontrolled memory usage growth.
This vulnerability can result in a denial-of-service condition, causing service unavailability for deployments that utilize the Magic Link authenticator. The impact is limited to these specific deployments and requires repeated invalid authentication attempts to trigger. |
| Perl versions through 5.43.10 have a heap buffer overflow when compiling regular expressions with a repeated fixed string on 32-bit builds.
Perl_study_chunk in regcomp_study.c checked the size of the joined substring buffer in characters rather than bytes. For a quantified fixed substring with a large minimum count, the byte length mincount * l could overflow SSize_t, producing an undersized SvGROW allocation; the subsequent copy writes past the end of the buffer.
A caller that compiles an attacker-controlled regular expression on a 32-bit perl build triggers a heap buffer overflow at compile time. |
| On 2026-05-11, between approximately 19:20 and 19:26 UTC, 84 malicious versions across 42 @tanstack/* packages were published to the npm registry. The publishes were authenticated via the legitimate GitHub Actions OIDC trusted-publisher binding for TanStack/router, but the publish workflow itself was not modified. The attacker chained three known vulnerability classes — a pull_request_target "Pwn Request" misconfiguration, GitHub Actions cache poisoning across the fork↔base trust boundary, and runtime memory extraction of the OIDC token from the Actions runner process — to publish credential-stealing malware under a trusted identity. Each affected package received exactly two malicious versions, published a few minutes apart. |
| Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, when dalfox is run in REST API server mode, the custom-payload-file field in model.Options is JSON-tagged and deserialized directly from the attacker's request body, then propagated unchanged through dalfox.Initialize into the scan engine. The engine passes the value to voltFile.ReadLinesOrLiteral, which reads lines from any file path accessible to the dalfox process and embeds each line as an XSS payload in outbound HTTP requests directed at the attacker-controlled target URL. Because the server has no API key by default, an unauthenticated network attacker can exfiltrate the contents of arbitrary files on the dalfox host by reading them line-by-line through scan traffic. This vulnerability is fixed in 2.13.0. |
| Gryph provides a security layer for AI coding agents. Prior to 0.7.0, Gryph implements logging levels that determine what content is logged to a local sqlite database. The README incorrectly mentions that the default log level is minimal while it is standard. Source code review shows sensitive file-write content remains in the stored payload as ContentPreview, OldString, or NewString at the default standard logging level and at full. This leads to logging of potentially sensitive file content in the local sqlite database, violating Gryphs sensitive file filter and log level contracts. This vulnerability is fixed in 0.7.0. |
| Streamlink is a CLI utility which pipes video streams from various services into a video player. Prior to 8.4.0, Streamlink's HLS and DASH parsers do not validate the URI scheme of segment entries and other resources. A remote .m3u8 HLS playlist or .mpd DASH manifest can list file:///path/to/file as a segment, and streamlink will read that local file and write its contents to the output stream. This vulnerability is fixed in 8.4.0. |
| A stored cross-site scripting (XSS) vulnerability in the /admin/config-module.php component of creatorsofcode simplephp GitHub commit 5184cff (Latest as of 2026-02-27) via injecting a crafted payload. |
| NewNTUnicodeString does not check for string length overflow. When provided with a string that overflows the maximum size of a NTUnicodeString (a 16-bit number of bytes), it returns a truncated string rather than an error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| Due to not validating the organization context when executing adaptive authentication flows, the WSO2 Identity Server allows adaptive authentication logic to be triggered on unintended organizations. A malicious actor with privileges to configure adaptive authentication within one organization can leverage this functionality to execute authentication logic on other organizations and sub-organizations.
This flaw allows bypassing authorization boundaries between organizations, leading to unauthorized access to critical operations and user accounts in other organizations. When adaptive authentication is enabled in a multi-organization deployment, a malicious actor with privileges to configure adaptive authentication in one organization could exploit this feature to perform critical operations in other organizations without authorization. This may result in privilege escalation, unauthorized access to resources, and potential account takeover across organizations. |
| Grav API Plugin is a RESTful API for Grav CMS that provides full headless access to your site's content, media, configuration, users, and system management. Prior to 1.0.0-beta.15, an insecure direct object reference and logic flaw in the Grav API plugin (UsersController::update) allows any authenticated user with basic API access (api.access) to modify their own permission configuration. An attacker can exploit this to escalate their privileges to Super Administrator (admin.super and api.super), leading to full system compromise and potential RCE. This vulnerability is fixed in 1.0.0-beta.15. |
| A Server-Side Request Forgery (SSRF) vulnerability exists in MLflow versions prior to 3.9.0. The `_create_webhook()` function in `mlflow/server/handlers.py` accepts a user-controlled `url` parameter without validation, and the `_send_webhook_request()` function in `mlflow/webhooks/delivery.py` sends HTTP POST requests to this attacker-controlled URL. This allows an authenticated attacker to force the MLflow backend to send HTTP requests to internal services, cloud metadata endpoints, or arbitrary external servers. The lack of input sanitization, URL scheme filtering, or allowlist validation on the webhook URL enables exploitation, potentially leading to cloud credential theft, internal network access, and data exfiltration. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent infinite loops caused by the next valid being the same
When processing valid within the range [valid : pos), if valid cannot
be retrieved correctly, for example, if the retrieved valid value is
always the same, this can trigger a potential infinite loop, similar
to the hung problem reported by syzbot [1].
Adding a check for the valid value within the loop body, and terminating
the loop and returning -EINVAL if the value is the same as the current
value, can prevent this.
[1]
INFO: task syz.4.21:6056 blocked for more than 143 seconds.
Call Trace:
rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244
inode_lock include/linux/fs.h:1027 [inline]
ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler
The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function
allocates memory for the device path using kobject_get_path(). If the
length of the device path exceeds the output buffer length, the function
returns -ENOSPC but does not free the allocated memory, resulting in a
memory leak.
Add a kfree() call to the error path to ensure the allocated memory is
properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| A vulnerability in the `_create_model_version()` handler of `mlflow/server/handlers.py` in mlflow/mlflow versions 3.9.0 and earlier allows an unauthenticated remote attacker to read arbitrary files from the server's filesystem. The issue arises when a `CreateModelVersion` request includes the tag `mlflow.prompt.is_prompt`, which bypasses source path validation. This enables an attacker to store an arbitrary local filesystem path as the model version source. The `get_model_version_artifact_handler()` function later uses this source to serve files without verifying the model version's prompt status, leading to a complete confidentiality compromise. This issue is fixed in version 3.10.0. |
