| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF
Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly
synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op()
with call_rcu() and introduced the RX_NO_AUTOTIMER flag.
However, this flag check was omitted for thrtimer in the packet rx
fast-path. During BCM RX operation teardown, a concurrent RCU reader
(bcm_rx_handler) can race and re-arm thrtimer via
bcm_rx_update_and_send() after call_rcu() has been scheduled. Once
the RCU grace period elapses, bcm_op is freed. The subsequently
firing thrtimer then dereferences the deallocated op, causing a UAF.
Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not
fully close the TOCTOU race and introduces latency for every CAN frame.
Conversely, calling hrtimer_cancel() directly inside the RCU callback
(softirq context) is fatal as hrtimer_cancel() can sleep, triggering
a "scheduling while atomic" panic.
Resolve this by deferring the timer cancellation and memory free to a
dedicated unbound workqueue (bcm_wq). The RCU callback now queues a
work item to bcm_wq, which safely cancels both timers and deallocates
memory in sleepable process context. A dedicated workqueue is used to
prevent system-wide WQ saturation and is cleanly flushed/destroyed
on module unload to avoid rmmod page faults.
Since the deferred work can now outlive the calling context by an
unbounded amount, also take a reference on op->sk when it is assigned
and drop it only once the deferred work has cancelled both timers, so a
socket can no longer be freed out from under a still-armed timer whose
callback (bcm_send_to_user()) dereferences op->sk. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: defer md5sig_info kfree past RCU grace period in tcp_connect
The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c)
has two symmetric branches:
if (needs_md5) {
tcp_ao_destroy_sock(sk, false);
} else if (needs_ao) {
tcp_clear_md5_list(sk);
kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...));
}
Both branches free a per-socket auth-info object while the socket is
in TCP_SYN_SENT and is already on the inet ehash (inserted by
inet_hash_connect() in tcp_v4_connect()). Both branches are reachable
by softirq RX-path readers that load the corresponding info pointer
via implicit RCU before bh_lock_sock_nested() is taken.
The needs_md5 branch is fixed in the prior patch by re-introducing
the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key
loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the
time it frees each tcp_ao_key all softirq readers that captured the
container have already completed rcu_read_unlock().
The needs_ao branch is not symmetric in the same way. The container
free can be deferred via kfree_rcu(md5sig, rcu) -- struct
tcp_md5sig_info already has the required rcu member
(include/net/tcp.h:1999-2002), and the rest of the tree already does
this in the tcp_md5sig_info_add() rollback paths
(net/ipv4/tcp_ipv4.c:1410, 1436). But the per-key teardown is done
by tcp_clear_md5_list() in process context BEFORE the container's
RCU grace period: it walks &md5sig->head and frees each
tcp_md5sig_key with bare hlist_del + kfree. A concurrent softirq
reader in __tcp_md5_do_lookup() / __tcp_md5_do_lookup_exact()
(tcp_ipv4.c:1253, 1298) walks the same list via
hlist_for_each_entry_rcu() and races with that bare kfree on the
keys themselves -- a per-key slab use-after-free of the same class
as the TCP-AO bug, on the same race window.
Fix this in two halves:
1. Convert the bare kfree() in tcp_connect() to kfree_rcu() so the
md5sig_info container joins the rest of the md5sig lifecycle.
The local-variable lift is mechanical and required because
kfree_rcu() is a macro that expects an lvalue.
2. Make tcp_clear_md5_list() RCU-safe by replacing hlist_del +
kfree(key) with hlist_del_rcu + kfree_rcu(key, rcu). struct
tcp_md5sig_key already carries the rcu member
(include/net/tcp.h:1995) and tcp_md5_do_del()
(net/ipv4/tcp_ipv4.c:1456) already uses kfree_rcu, so this
restores the lifecycle invariant the rest of the file follows
rather than introducing a one-off.
The other caller of tcp_clear_md5_list() is tcp_md5_destruct_sock()
(net/ipv4/tcp.c:412), which runs from the sock destructor when the
socket is already unhashed and unreachable; the extra grace period
there is unnecessary but harmless. Making the helper unconditionally
RCU-safe is the cleaner contract.
The needs_ao branch is not reachable by the userns reproducer used
to demonstrate the AO-side splat (the repro installs both keys but
ends up in the needs_md5 branch because the connect peer matches
the MD5 key, not the AO key); however the symmetric race exists
and a maintainer touching this code should not have to think about
which branch escapes RCU and which one does not.
[also credits to Qihang, who found that this races with tcp-diag] |
| In the Linux kernel, the following vulnerability has been resolved:
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */
lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64))
extra_buffers_size += lsmctx_aligned_size
...
security_release_secctx(&lsmctx) /* memset zeroes len */
...
sg_buf_end_offset = sg_buf_offset + extra_buffers_size
- ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: initialize the remaining fields of fwnode_handle in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
[ Fix typo in commit message. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mchp23k256: use SPI match data for chip caps
The driver stores chip capacity information in both the OF match table
and the SPI id table. Probe currently uses of_device_get_match_data(),
so a non-OF SPI modalias match falls back to mchp23k256_caps even when
the SPI id table selected a different part.
Use spi_get_device_match_data() so SPI id-table driver_data is consumed
when OF match data is absent. This keeps the existing default fallback
while avoiding the wrong MTD geometry for id-table-only matches. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Validate the packet length reported by the NIC
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sh: rz-dmac: Move interrupt request after everything is set up
Once the interrupt is requested, the interrupt handler may run immediately.
Since the IRQ handler can access channel->ch_base, which is initialized
only after requesting the IRQ, this may lead to invalid memory access.
Likewise, the IRQ thread may access uninitialized data (the ld_free,
ld_queue, and ld_active lists), which may also lead to issues.
Request the interrupts only after everything is set up. To keep the error
path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent(). |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: Fix jump_label smp syncing
The original commit 8c30b0018f9d ("openrisc: Add jump label support")
copies from arm64 and does not properly consider how icache invalidation
on remote cores works in OpenRISC. On OpenRISC remote icaches need to
be invalidated otherwise static key's may remain state after updating.
Fix SMP cache syncing by:
1. Properly invalidate remote core icaches on SMP systems by using
icache_all_inv. The old code uses kick_all_cpus_sync() which runs a
no-op IPI function call on remote CPU's which does execute a lot of
code and flushes many cache lines in the process, but does not flush
all and it's not correct on OpenRISC.
2. For architectures that do not have WRITETHROUGH caches be sure
to flush the dcache after patching.
To test this I first reproduced the issue using a custom test module
[0]. The test confirmed that some icache lines maintained stale
static_key code sequences after calling static_branch_enable(). After
this patch there are no longer jump_label coherency issues.
[0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix condition in 'nand_select_target()'
'cs' here must be in range [0:nanddev_ntargets[. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: fix uninitialized struct pages for ZONE_DEVICE
If DAX memory is hotplugged into an unoccupied subsection of an early
section, section_activate() reuses the unoptimized boot memmap. However,
compound_nr_pages() still assumes that vmemmap optimization is in effect
and initializes only the reduced number of struct pages. As a result, the
remaining tail struct pages are left uninitialized, which can later lead
to unexpected behavior or crashes.
Fix this by treating early sections as unoptimized when calculating how
many struct pages to initialize. |
| A weakness has been identified in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. This affects an unknown part of the component Wi-Fi Timer Power-Schedule Feature. Executing a manipulation of the argument switch_power/restore_power can lead to os command injection. The attack can be launched remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: avoid leaking the caller's thread keyring via the table device file
The refactoring in commit a28d893eb327 ("md: port block device access to file")
accidentally causes the caller's thread keyring to be kept alive long
beyond the caller's lifetime.
As a result, "cryptsetup luksSuspend" silently fails to wipe the
LUKS volume key from memory.
In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread
keyring to pass the volume key to the kernel. dm-crypt's
crypt_set_keyring_key() copies the key material into its own
crypt_config structure and then drops its own reference to the key in
the keyring with key_put().
With this fix, restoring pre-v6.9 behavior, the copy in the thread
keyring is then promptly garbage collected, such that exactly one copy
of the volume key remains. This single copy is correctly wiped from
memory on "cryptsetup luksSuspend".
Without this fix, the thread keyring and the volume key in it remains.
This second copy is only freed on "luksClose". "luksSuspend" neither
knows about this copy nor has any way to remove it, so the key remains
recoverable from RAM after a suspend that is documented to have wiped it.
This fix should not introduce new security problems, as the code is
anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling
task, is the legitimate owner of this long-lived file. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/bpf-ops: reject re-registration of an already-bound ops
io_install_bpf() only rejects a second registration on the ctx side
(ctx->bpf_ops) and sets the per-map back-pointer ops->priv
unconditionally. The struct_ops link path never advances a map past
BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be
registered more than once, and bpf_io_reg() re-resolves the target ring
via fget(ops->ring_fd) on every call. A caller can therefore point the
same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE
calls.
The second registration passes the ctx->bpf_ops check (the new ctx has
none) and overwrites ops->priv, orphaning the first ctx. Teardown
(io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so
the orphaned ctx is never torn down: its ctx->loop_step keeps pointing
into the struct_ops trampoline, which is freed once the map is gone. A
later io_uring_enter() on the orphaned ring then calls the dangling
ctx->loop_step from io_run_loop() -- a use-after-free of freed
executable memory, reachable by a task with CAP_BPF + CAP_PERFMON.
Reject registration when ops->priv is already set, as hid_bpf_reg()
does for its struct_ops. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add missing rcu list annotations and operations
sashiko-bot remarked the missing use of list_add_rcu() in
bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure
when bcm_proc_show() traverses the bcm_op's under rcu_read_lock().
To cover all initial settings of the bcm_op's the list_add_rcu() calls
are moved to the end of the setup code.
While at it, also fix the mirroring removal side: bcm_release() called
bcm_remove_op() - which frees the op via call_rcu() - on ops that were
still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first.
Unlink each op with list_del_rcu() before handing it to bcm_remove_op(),
matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking
lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all
mutate both fields under that same lock. Because the lockless reads
and the locked writes are unordered with respect to each other, a
racing bcm_notify() (device unregister) or bcm_connect() (concurrent
bind on another thread sharing the socket) can make bcm_sendmsg()
observe an inconsistent combination, e.g. a stale bound=1 together
with the now-cleared ifindex=0, silently turning a socket bound to a
specific CAN interface into one that also matches "any" interface.
Keep the lockless bo->bound check purely as a fast-path reject, and
move the ifindex read (and a bo->bound re-check) into the locked
section, where every writer already serializes. This removes the
possibility of observing the two fields torn against each other,
rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs
on two independently updated fields. Annotate the now-purely-lockless
bo->bound accesses consistently across all its write sites.
Also fix bcm_rx_setup() silently returning success when the target
device disappears concurrently instead of reporting -ENODEV, so a
broken RX op is no longer left registered as if it had succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: fix mask build for partial field offload
nft_payload_offload_mask() builds the offload match mask for a payload
expression that covers only part of a header field. For a partial IPv6
address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which
is undefined on the 32-bit int operand. It also trims only one word, so
the remaining words stay 0xffffffff (and when priv_len is a multiple of 4
the trim is skipped entirely), leaving the mask covering more bytes than
the rule matches.
UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20
shift exponent 120 is too large for 32-bit type 'int'
...
The match is byte-granular and struct nft_data is zero-initialised, so the
correct mask is simply the first priv_len bytes set to 0xff. Set those
bytes directly and drop the word/shift trimming; this removes the undefined
shift and no longer over-masks the trailing bytes. |
| A heap out-of-bounds write vulnerability was found in the GStreamer gst-plugins-bad adpcmdec element when decoding IMA/DVI ADPCM audio. Insufficient validation of the per-block sample count for multi-channel streams allows a crafted WAV file to cause writes beyond the allocated output buffer. This can lead to application crash, denial of service, memory corruption, or potentially arbitrary code execution when untrusted media is processed. |
