| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: fix resource leaks on probe failure
During driver initialization in asus_wmi_add(), various subsystems are
registered sequentially. However, the error path labels are out of order
relative to the registration sequence.
Specifically:
1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to
fail_custom_fan_curve. Because this label is placed below fail_sysfs,
it bypasses the cleanup calls for the input device and sysfs groups,
which were successfully registered before, leaking those resources.
2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad.
Because fail_screenpad is placed below fail_backlight, it bypasses the
cleanup calls for backlight and rfkill, leaking those resources.
Fix these resource leaks by reordering the error path labels in
asus_wmi_add() to match the exact reverse order of the resource
allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered buffer attaches the bvec pages this way via
io_sg_from_iter(). The rest of the stack honours this invariant:
skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS
is set, and skb_zcopy_managed() is the guard used at the other unref
sites.
esp_ssg_unref() is missing that guard, so for a managed-frag skb it
drops a page reference the skb never acquired. This can underflow the
page reference count and free a page that is still in use.
Guard the function with skb_zcopy_managed() so both unref paths are
skipped for managed-frag skbs, matching skb_release_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture frees the rdt_l3_mon_domain that contains the worker's
work_struct. When the worker unblocks, the container_of() it performs on the
embedded work pointer dereferences freed memory.
Drop cpus_read_lock() from the workers and instead drain pending and in-flight
work synchronously before the architecture can free the domain. Since
architecture offlines the domain under cpus_write_lock() after it has been
unlinked from the RCU list and a grace period has elapsed, no new work can be
scheduled. The cancel only needs to wait out existing work. Drop
rdtgroup_mutex during CPU offline around cancel_delayed_work_sync() so that
a worker waiting on the mutex can complete before re-pinning the work on
a different CPU.
When offlining a CPU the architecture may iterate over resources in any order.
For example, the MBA control domain may be offlined before or after
a corresponding L3 monitor domain. Ensure that resctrl fs cancels the workers
no matter what order the architecture offlines the domains. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Serialize multi-part Get/Set Feature transfers
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the
same ID while the old device is still registered.
The final device release callback is also a possible cleanup path when
SCMI children are deleted by driver core recursion rather than
__scmi_device_destroy(). Release the SCMI bus ID from a common helper
used by destroy, register-failure and final-release paths, and clear
scmi_dev->id after freeing it so the final release cannot free the same
ID again. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find()
Syzbot/stress-ng reported an ABBA deadlock in ext4 when exercising
concurrent xattr workloads (using the ea_inode mount/format option).
The deadlock occurs between the running transaction and the eviction
thread:
- Task 1 (stress-ng): Holds a reference to a shared mbcache_entry (ce)
and calls ext4_xattr_inode_cache_find() -> ext4_iget() to retrieve
the corresponding EA inode. Since the EA inode is currently being
evicted, ext4_iget() blocks in __wait_on_freeing_inode() waiting for
eviction to complete.
- Task 2 (eviction thread): Currently evicting the same EA inode in
ext4_evict_ea_inode(). It calls mb_cache_entry_wait_unused(oe) which
blocks waiting for Task 1 to release the reference to the mbcache_entry.
To break this deadlock, implement a new ext4_iget() configuration flag
named EXT4_IGET_NOWAIT. When set, perform a non-blocking lookup of the
inode via VFS's find_inode_nowait() API.
If the inode is currently being evicted (marked with I_FREEING or
I_WILL_FREE) or created (I_CREATING), or if it is not present in the VFS
inode cache (cache miss), simply skip it (returning -ENOENT) rather than
waiting for eviction/creation to complete, breaking the ABBA cycle.
Since we return -ENOENT immediately on a cache miss, we never attempt to
allocate a new inode or call iget_locked(), completely eliminating any
TOCTOU race window.
If the returned inode is I_NEW, wait for its initialization to clear via
wait_on_new_inode(). If initialization fails and the inode is unhashed
during wait_on_new_inode() waking up (e.g., due to an I/O read error in
another thread), safely drop the reference and return -ENOENT. This
unhashed check is executed unconditionally on all cache-hit pathways to
properly handle concurrent initialization failures.
Finally, standard validation checks (including is_bad_inode,
EXT4_EA_INODE_FL, file_acl, and xattr flags) are executed as normal inside
check_igot_inode() to fully guarantee VFS-layer safety.
In ext4_xattr_inode_cache_find(), invoke ext4_iget() with the new
EXT4_IGET_NOWAIT flag to perform the non-blocking cache search. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread. |
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including marking unpaid orders as paid and cancelling completed orders. |
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including orders that were already paid or completed. |
| The YITH WooCommerce Popup WordPress plugin before 1.60.0 does not check the capability of the requesting user before deleting post meta, allowing users with the Contributor role and above to delete arbitrary post meta from any post, including content owned by higher-privileged users. |
| The Donation Thermometer WordPress plugin before 2.3.0 does not escape a colour value taken from a shortcode attribute before using it in an attribute of the generated legend markup, allowing users with the Contributor role and above to inject arbitrary event handlers that execute when the page is viewed. |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server
(with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after
free of a `struct Curl_easy` object. |
| The Robokassa payment gateway for Woocommerce WordPress plugin before 1.9.0 does not verify the authenticity of an incoming payment-notification request before acting on the order named in it, allowing unauthenticated attackers to force any WooCommerce order into a failed state. Order identifiers are sequential, so every order in the shop can be taken out of the fulfilment queue one request at a time. |
| The Tainacan WordPress plugin before 1.4.0 does not restrict its reports REST endpoints to users with a management capability, allowing any authenticated subscriber to read the email addresses of the repository's staff. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
__tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger
tegra241_cmdqv, which frees the original @smmu once it relocates. A failure
after that returned NULL, and the caller then dereferenced the freed @smmu
on its fallback path.
Return an int and take @smmu by reference instead, then update *smmu to the
reallocated pointer after devm_krealloc() succeeds, so the caller and its
fallback path both use the live @smmu rather than the freed original. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when dynids.lock is held,
as remove_id_store() can free the node. Thus, make a copy in
pci_match_device(). Also, clarify that the id parameter is only valid
during probe. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry()
When the device is in the fatal error state, write_tpt_entry() returns -EIO
before handing the caller's preallocated skb to the transmit path; its
allocation-failure returns do the same. c4iw_dereg_mr() ignores the error
and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the
skb a second time after dereg_mem() already consumed it, a double free.
Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on
every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and
stag allocation failure. c4iw_ofld_send() consumes the skb on success and
error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after
dereg_mem(). |
