| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl through user and PID namespaces because cad_pid was registered in
pid_table[]. Moving cad_pid back to the global reboot sysctl table
corrected that namespace and permission mismatch, but did not fix the
underlying lifetime race.
Fix this by treating cad_pid as an RCU-protected pointer at both read
sites and by waiting for a grace period before dropping the old reference
on the write side.
call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid()
also queues pid->rcu; queueing the same rcu_head twice can corrupt the
RCU callback list.
Original KASAN crash stack:
kernel/pid.c:545 pid_nr_ns() # reads freed pid->level
kernel/pid.c:556 pid_vnr() # calls pid_nr_ns()
kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory corruption from a "STACKTRACE" histogram key
"cpu", "CPU", "stacktrace" and "STACKTRACE" are generic fields, defined
with an offset and a size of zero so that the filter code can match them
by name. parse_field() maps them onto their common_* equivalents for
backward compatibility, but unlike the common_* names it hands the
placeholder back to the caller instead of NULL.
create_hist_field() takes a non-NULL field as a promise that the record
carries a stacktrace and picks HIST_FIELD_FN_STACK, so the __data_loc
word is read from offset 0, that is from common_type, and its low 16
bits are followed as an offset into the record. What is found there
becomes the length of an unbounded memcpy. Pick an event whose id is
small enough that the offset stays inside its own record and the length
is a kernel text address:
# cd /sys/kernel/tracing
# echo 'hist:keys=STACKTRACE' > events/ftrace/print/trigger
# echo hello > trace_marker
Oops: general protection fault, probably for non-canonical address
RIP: 0010:rb_next+0x23/0x60
</IRQ>
RIP: 0010:memcpy+0xc/0x30
event_hist_trigger+0x2e7/0x12c0
Kernel panic - not syncing: Fatal exception in interrupt
Leave the field NULL, which is what the comment above the branch says
the code does and what common_stacktrace already does. FILTER_CPU and
FILTER_COMM are left alone, their create_hist_field() branches never
look at the field. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this element that is used to find the trace_array to
increment its reference counter is also freed when the instance is
removed.
To solve this, add a trace_array_tracer_options_get() helper function that
will take the address of the element that is passed to the open function
by the inode->i_private pointer and search all the trace_arrays under a
lock to find the one that the element's address is in the range of the
trace_arrays topts array elements. When a match happens, that trace_array's
reference would be increased.
Note, there's a race where if an admin was deleting and creating trace
instances at the same time and the memory of the old trace_array's array
matched the memory of the new trace_array that it could in theory open the
option from the wrong trace array. But we do not care because it would be
stupid to perform that kind of action. As long as the only thing that can
happen is that the option from the wrong trace array is used and doesn't
crash the kernel it will only make the user confused. But if they are
doing something stupid like this, they are already confused, so no harm
done. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: validate URB actual_length in interrupt callback
i_usx2y_in04_int() processes the interrupt URB data without checking
urb->actual_length. A short transfer from a malfunctioning device
would cause the handler to process uninitialized heap data from the
kmalloc-allocated in04_buf, which is then copied to the mmap-accessible
ctl_snapshot[] array.
Fix by using kzalloc() for in04_buf to zero-initialize the buffer,
and adding an actual_length check to skip processing on short
transfers while still resubmitting the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip the VMID 0 flush for VRAM
Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches
via its direct MC address without programming a GART window, yet the wipe
still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA
flush can wedge the engine; only flush when a GART window is actually used.
v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed,
and drive the clear and copy paths from that. (Christian)
v3: Make the vm_needs_flush output parameter mandatory instead of
allowing NULL. (Christian)
(cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take the reference before publishing the named histogram trigger
event_hist_trigger_named_init() puts the trigger on the global
named_triggers list and only then takes the reference on the trigger it
shares its histogram with:
data->ref++;
save_named_trigger(data->named_data->name, data);
ret = event_hist_trigger_init(data->named_data);
if (ret < 0) {
kfree(data->cmd_ops);
data->cmd_ops = &trigger_hist_cmd;
}
return ret;
event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and
nothing takes the trigger back off the list on the way out.
event_hist_trigger_parse() frees it, and the next lookup by name reads the
freed object:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff888009346860 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 67:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Do the reference first and publish once it has succeeded, so that nothing
which can fail runs after the trigger becomes findable. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file->triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) < 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr
Add a size parameter to ivpu_to_cpu_addr() and validate that the
whole [vpu_addr, vpu_addr + size) range stays within the BO. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate firmware log buffer metadata
The tracing log headers parsed by fw_log_print_buffer() reside in
DMA-shared BOs that the NPU firmware can write to.
fw_log_from_bo() validated log->header_size and log->size, but
fw_log_print_buffer() re-read those same fields from shared memory
afterwards, allowing a TOCTOU where firmware changes them between the
check and the use, and making the host dereference out-of-bounds
addresses while printing logs.
Snapshot the validated values once with READ_ONCE() and pass them down
explicitly in a new struct ivpu_fw_log_desc instead of re-reading them
from the shared struct. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Limit firmware log name prints to field size
The name in struct vpu_tracing_buffer_header is a fixed-size array
populated by the NPU firmware. It is expected to be NUL-terminated,
but nothing on the host side enforces this, so printing it with an
unbounded string conversion would read past the field if the
terminator is ever missing and expose adjacent bytes of the shared
tracing BO through dmesg and the debugfs FW log output.
Print at most as many characters as the name field holds, so the output
never runs past it even if the string is not NUL-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq->hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice. |
| In the Linux kernel, the following vulnerability has been resolved:
bootconfig: Fix integer overflow in initrd size check
Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd
with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer
arithmetic:
data = ((void *)hdr) - size;
to wrap around on 32-bit systems (or when pointer subtraction overflows).
Because data wraps around, the subsequent bounds check:
if ((unsigned long)data < initrd_start)
evaluates to false, bypassing the check. The kernel then calls
xbc_calc_checksum(data, size), which attempts to read 4GB of memory,
hitting unmapped pages and triggering a fatal kernel page fault during
early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an
unbounded 32-bit size can similarly bypass the initrd_start check.
Fix this by:
1. Ensuring the initrd is at least large enough to contain the bootconfig
footer and verifying hdr is within the initrd bounds.
2. Checking that size does not exceed XBC_DATA_MAX and does not exceed
the available space between initrd_start and hdr before performing
pointer subtraction. |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: end write accounting from ->ki_complete
Commit b000145e9907 moved both the fsnotify calls and the write
accounting out of the kiocb completion handler and into the
io_req_rw_complete() task_work. However, only the fsnotify part actually
needed to move as it may sleep. Ending the write accounting is just a
percpu_up_read() on the superblock writers sem.
Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE
protection depend on the ring owner getting to running task_work. But
the task may be blocked in freeze_super(), causing it to never get to
that:
task io-wq worker
--------------------------------------------------------------
io_write()
io_kiocb_start_write() (takes sb_writers, hidden from
lockdep by __sb_writers_release)
write_iter() -> -EIOCBQUEUED
ioctl(FS_IOC_SHUTDOWN)
bdev_freeze()
freeze_super()
percpu_down_write() <- waits for the reader above
io_write()
kiocb_start_write()
percpu_down_read() <- queued
behind the
writer
<bio completes>
io_complete_rw()
queues io_req_rw_complete() <- never runs, task is in D state
End the write from io_complete_rw() instead, and leave only the fsnotify
calls in task_work. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release all action references on NEWACTION failure
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use option bits for CFM/MRP frame handlers
CFM and MRP register a global br_frame_type whose hlist_node is linked
into the per-bridge frame_type_list when the first MEP/MRP instance is
created. Enabling the protocol on multiple bridges therefore inserts the
same node into multiple lists. Unregistering it on one bridge then
corrupts list state belonging to another.
These handlers can only be installed once per bridge, and they are
uncommon. Track their per-bridge enable state with net_bridge option
bits, which already live on the Rx hot cache line, and dispatch the
matching handler directly from the receive path. Check both bits
together first as an unlikely case.
Remove the generic frame_type_list and br_frame_type helpers, which
have had no other users since CFM and MRP were added. That shrinks
struct net_bridge by 8 bytes and drops the list walk from the fast
path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and
the compiler prunes the branch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: prevent UAF during module unload
nf_ct_set_timeout() protects the timeout hook dereference and policy lookup
with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net
operations before it clears the hook.
This allows the following interleaving:
CPU 0 CPU 1
cttimeout_exit() nf_ct_set_timeout()
unregister_pernet_subsys() rcu_read_lock()
kfree(pernet) h = nf_ct_timeout_hook
h->timeout_find_get()
nfct_timeout_pernet()
The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the
already freed per-net timeout list. KASAN reported:
BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get
Read of size 8 by task poc/90
Call Trace:
ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout]
nf_ct_set_timeout+0x7b/0x3c0
xt_ct_tg_check+0x724/0xb20
xt_check_target+0x234/0xa90
do_ipt_set_ctl+0x570/0x1270
Allocated by task 89:
__kmalloc_noprof+0x16e/0x460
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
Freed by task 91:
kfree+0x131/0x390
ops_undo_list+0x3d4/0x730
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout]
Clear the hook and wait for existing readers before unregistering the
per-net operations. This blocks new policy lookups and ensures readers that
observed the hook finish before the per-net storage is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: preserve LZMA decoders on resize failure
The pool-resize path frees each stream's old decoder before allocating
its replacement. If an allocation fails after some streams have already
been replaced, the failed stream is put back on the list with state ==
NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole
pool had been resized.
An existing LZMA mount can select the broken stream and pass
NULL to xz_dec_microlzma_reset(). A retry at the same size also
skip another resize attempt. Since the global maximum was advanced,
thus, the invalid state is left unrepaired.
Allocate each replacement before freeing the old decoder, temporarily
retaining one old decoder during allocation. Stop at the first failure
and advance z_erofs_lzma_max_dictsize only after all streams satisfy
the request.
Record each stream's dictionary capacity so retries can skip streams
already enlarged before a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: cc2520: fix FIFOP work use-after-free
The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal,
cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ
remains active until after ->remove() returns and can queue the work
again after that flush, allowing it to run after the private data is
released.
Disable the work with disable_work_sync() instead of flushing it, so
the handler can no longer queue it once removal begins. Destroy the
buffer mutex last, since the worker and the stop callback invoked
through ieee802154_unregister_hw() both take it.
Found by an in-house static analysis tool. |
