Total
6373 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-56541 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup() During ath12k module removal, in ath12k_core_deinit(), ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees the ah->hw as well as all the ar's in it. After this ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup() tries to access one of the freed ar's from pending skb. This is because during mac destroy, driver failed to flush few data packets, which were accessed later in ath12k_dp_cc_cleanup() and freed, but using ar from the packet led to this use-after-free. BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] Write of size 4 at addr ffff888150bd3514 by task modprobe/8926 CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted 6.11.0-rc2-wt-ath+ #1746 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0x7d/0xe0 print_address_description.constprop.0+0x33/0x3a0 print_report+0xb5/0x260 ? kasan_addr_to_slab+0x24/0x80 kasan_report+0xd8/0x110 ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] kasan_check_range+0xf3/0x1a0 __kasan_check_write+0x14/0x20 ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ath12k_dp_free+0x178/0x420 [ath12k] ath12k_core_stop+0x176/0x200 [ath12k] ath12k_core_deinit+0x13f/0x210 [ath12k] ath12k_pci_remove+0xad/0x1c0 [ath12k] pci_device_remove+0x9b/0x1b0 device_remove+0xbf/0x150 device_release_driver_internal+0x3c3/0x580 ? __kasan_check_read+0x11/0x20 driver_detach+0xc4/0x190 bus_remove_driver+0x130/0x2a0 driver_unregister+0x68/0x90 pci_unregister_driver+0x24/0x240 ? find_module_all+0x13e/0x1e0 ath12k_pci_exit+0x10/0x20 [ath12k] __do_sys_delete_module+0x32c/0x580 ? module_flags+0x2f0/0x2f0 ? kmem_cache_free+0xf0/0x410 ? __fput+0x56f/0xab0 ? __fput+0x56f/0xab0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_delete_module+0x4f/0x70 x64_sys_call+0x522/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f8182c6ac8b Commit 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery scenarios") added the change to decrement the pending packets count in case of recovery which make sense as ah->hw as well all ar's in it are intact during recovery, but during core deinit there is no use in decrementing packets count or waking up the empty waitq as the module is going to be removed also ar's from pending skb's can't be used and the packets should just be released back. To fix this, avoid accessing ar from skb->cb when driver is being unregistered. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2024-56538 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_kms: Unplug DRM device before removal Prevent userspace accesses to the DRM device from causing use-after-frees by unplugging the device before we remove it. This causes any further userspace accesses to result in an error without further calls into this driver's internals. | ||||
| CVE-2024-54458 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: bsg: Set bsg_queue to NULL after removal Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. | ||||
| CVE-2024-53239 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Release resources at card release The current 6fire code tries to release the resources right after the call of usb6fire_chip_abort(). But at this moment, the card object might be still in use (as we're calling snd_card_free_when_closed()). For avoid potential UAFs, move the release of resources to the card's private_free instead of the manual call of usb6fire_chip_destroy() at the USB disconnect callback. | ||||
| CVE-2024-53232 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device. | ||||
| CVE-2024-53227 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Fix use-after-free in bfad_im_module_exit() BUG: KASAN: slab-use-after-free in __lock_acquire+0x2aca/0x3a20 Read of size 8 at addr ffff8881082d80c8 by task modprobe/25303 Call Trace: <TASK> dump_stack_lvl+0x95/0xe0 print_report+0xcb/0x620 kasan_report+0xbd/0xf0 __lock_acquire+0x2aca/0x3a20 lock_acquire+0x19b/0x520 _raw_spin_lock+0x2b/0x40 attribute_container_unregister+0x30/0x160 fc_release_transport+0x19/0x90 [scsi_transport_fc] bfad_im_module_exit+0x23/0x60 [bfa] bfad_init+0xdb/0xff0 [bfa] do_one_initcall+0xdc/0x550 do_init_module+0x22d/0x6b0 load_module+0x4e96/0x5ff0 init_module_from_file+0xcd/0x130 idempotent_init_module+0x330/0x620 __x64_sys_finit_module+0xb3/0x110 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 25303: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 fc_attach_transport+0x4f/0x4740 [scsi_transport_fc] bfad_im_module_init+0x17/0x80 [bfa] bfad_init+0x23/0xff0 [bfa] do_one_initcall+0xdc/0x550 do_init_module+0x22d/0x6b0 load_module+0x4e96/0x5ff0 init_module_from_file+0xcd/0x130 idempotent_init_module+0x330/0x620 __x64_sys_finit_module+0xb3/0x110 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 25303: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x38/0x50 kfree+0x212/0x480 bfad_im_module_init+0x7e/0x80 [bfa] bfad_init+0x23/0xff0 [bfa] do_one_initcall+0xdc/0x550 do_init_module+0x22d/0x6b0 load_module+0x4e96/0x5ff0 init_module_from_file+0xcd/0x130 idempotent_init_module+0x330/0x620 __x64_sys_finit_module+0xb3/0x110 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Above issue happens as follows: bfad_init error = bfad_im_module_init() fc_release_transport(bfad_im_scsi_transport_template); if (error) goto ext; ext: bfad_im_module_exit(); fc_release_transport(bfad_im_scsi_transport_template); --> Trigger double release Don't call bfad_im_module_exit() if bfad_im_module_init() failed. | ||||
| CVE-2024-53218 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix race in concurrent f2fs_stop_gc_thread In my test case, concurrent calls to f2fs shutdown report the following stack trace: Oops: general protection fault, probably for non-canonical address 0xc6cfff63bb5513fc: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 678 Comm: f2fs_rep_shutdo Not tainted 6.12.0-rc5-next-20241029-g6fb2fa9805c5-dirty #85 Call Trace: <TASK> ? show_regs+0x8b/0xa0 ? __die_body+0x26/0xa0 ? die_addr+0x54/0x90 ? exc_general_protection+0x24b/0x5c0 ? asm_exc_general_protection+0x26/0x30 ? kthread_stop+0x46/0x390 f2fs_stop_gc_thread+0x6c/0x110 f2fs_do_shutdown+0x309/0x3a0 f2fs_ioc_shutdown+0x150/0x1c0 __f2fs_ioctl+0xffd/0x2ac0 f2fs_ioctl+0x76/0xe0 vfs_ioctl+0x23/0x60 __x64_sys_ioctl+0xce/0xf0 x64_sys_call+0x2b1b/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e The root cause is a race condition in f2fs_stop_gc_thread() called from different f2fs shutdown paths: [CPU0] [CPU1] ---------------------- ----------------------- f2fs_stop_gc_thread f2fs_stop_gc_thread gc_th = sbi->gc_thread gc_th = sbi->gc_thread kfree(gc_th) sbi->gc_thread = NULL < gc_th != NULL > kthread_stop(gc_th->f2fs_gc_task) //UAF The commit c7f114d864ac ("f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()") attempted to fix this issue by using a read semaphore to prevent races between shutdown and remount threads, but it fails to prevent all race conditions. Fix it by converting to write lock of s_umount in f2fs_do_shutdown(). | ||||
| CVE-2024-53216 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release svc_expkey/svc_export with rcu_work The last reference for `cache_head` can be reduced to zero in `c_show` and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently, `svc_export_put` and `expkey_put` will be invoked, leading to two issues: 1. The `svc_export_put` will directly free ex_uuid. However, `e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can trigger a use-after-free issue, shown below. ================================================================== BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd] Read of size 1 at addr ff11000010fdc120 by task cat/870 CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_address_description.constprop.0+0x2c/0x3a0 print_report+0xb9/0x280 kasan_report+0xae/0xe0 svc_export_show+0x362/0x430 [nfsd] c_show+0x161/0x390 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 830: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_node_track_caller_noprof+0x1bc/0x400 kmemdup_noprof+0x22/0x50 svc_export_parse+0x8a9/0xb80 [nfsd] cache_do_downcall+0x71/0xa0 [sunrpc] cache_write_procfs+0x8e/0xd0 [sunrpc] proc_reg_write+0xe1/0x140 vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 868: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kfree+0xf3/0x3e0 svc_export_put+0x87/0xb0 [nfsd] cache_purge+0x17f/0x1f0 [sunrpc] nfsd_destroy_serv+0x226/0x2d0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`. However, `svc_export_put`/`expkey_put` will call path_put, which subsequently triggers a sleeping operation due to the following `dput`. ============================= WARNING: suspicious RCU usage 5.10.0-dirty #141 Not tainted ----------------------------- ... Call Trace: dump_stack+0x9a/0xd0 ___might_sleep+0x231/0x240 dput+0x39/0x600 path_put+0x1b/0x30 svc_export_put+0x17/0x80 e_show+0x1c9/0x200 seq_read_iter+0x63f/0x7c0 seq_read+0x226/0x2d0 vfs_read+0x113/0x2c0 ksys_read+0xc9/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Fix these issues by using `rcu_work` to help release `svc_expkey`/`svc_export`. This approach allows for an asynchronous context to invoke `path_put` and also facilitates the freeing of `uuid/exp/key` after an RCU grace period. | ||||
| CVE-2024-53208 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353 Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54 CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 q kasan_report+0x143/0x180 mm/kasan/report.c:601 set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:328 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd10 kernel/workqueue.c:3389 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4193 kmalloc_noprof include/linux/slab.h:681 [inline] kzalloc_noprof include/linux/slab.h:807 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 set_powered+0x3cd/0x5e0 net/bluetooth/mgmt.c:1394 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa72/0xc90 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5246: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x149/0x360 mm/slub.c:4598 settings_rsp+0x2bc/0x390 net/bluetooth/mgmt.c:1443 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x112/0x420 net/bluetooth/mgmt.c:9455 hci_dev_close_sync+0x665/0x11a0 net/bluetooth/hci_sync.c:5191 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83gv entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-53185 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix NULL ptr deref in crypto_aead_setkey() Neither SMB3.0 or SMB3.02 supports encryption negotiate context, so when SMB2_GLOBAL_CAP_ENCRYPTION flag is set in the negotiate response, the client uses AES-128-CCM as the default cipher. See MS-SMB2 3.3.5.4. Commit b0abcd65ec54 ("smb: client: fix UAF in async decryption") added a @server->cipher_type check to conditionally call smb3_crypto_aead_allocate(), but that check would always be false as @server->cipher_type is unset for SMB3.02. Fix the following KASAN splat by setting @server->cipher_type for SMB3.02 as well. mount.cifs //srv/share /mnt -o vers=3.02,seal,... BUG: KASAN: null-ptr-deref in crypto_aead_setkey+0x2c/0x130 Read of size 8 at addr 0000000000000020 by task mount.cifs/1095 CPU: 1 UID: 0 PID: 1095 Comm: mount.cifs Not tainted 6.12.0 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? crypto_aead_setkey+0x2c/0x130 kasan_report+0xda/0x110 ? crypto_aead_setkey+0x2c/0x130 crypto_aead_setkey+0x2c/0x130 crypt_message+0x258/0xec0 [cifs] ? __asan_memset+0x23/0x50 ? __pfx_crypt_message+0x10/0x10 [cifs] ? mark_lock+0xb0/0x6a0 ? hlock_class+0x32/0xb0 ? mark_lock+0xb0/0x6a0 smb3_init_transform_rq+0x352/0x3f0 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 smb_send_rqst+0x144/0x230 [cifs] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] ? hlock_class+0x32/0xb0 ? smb2_setup_request+0x225/0x3a0 [cifs] ? __pfx_cifs_compound_last_callback+0x10/0x10 [cifs] compound_send_recv+0x59b/0x1140 [cifs] ? __pfx_compound_send_recv+0x10/0x10 [cifs] ? __create_object+0x5e/0x90 ? hlock_class+0x32/0xb0 ? do_raw_spin_unlock+0x9a/0xf0 cifs_send_recv+0x23/0x30 [cifs] SMB2_tcon+0x3ec/0xb30 [cifs] ? __pfx_SMB2_tcon+0x10/0x10 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 ? __pfx_lock_release+0x10/0x10 ? do_raw_spin_trylock+0xc6/0x120 ? lock_acquire+0x3f/0x90 ? _get_xid+0x16/0xd0 [cifs] ? __pfx_SMB2_tcon+0x10/0x10 [cifs] ? cifs_get_smb_ses+0xcdd/0x10a0 [cifs] cifs_get_smb_ses+0xcdd/0x10a0 [cifs] ? __pfx_cifs_get_smb_ses+0x10/0x10 [cifs] ? cifs_get_tcp_session+0xaa0/0xca0 [cifs] cifs_mount_get_session+0x8a/0x210 [cifs] dfs_mount_share+0x1b0/0x11d0 [cifs] ? __pfx___lock_acquire+0x10/0x10 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? lock_release+0x203/0x5d0 cifs_mount+0xb3/0x3d0 [cifs] ? do_raw_spin_trylock+0xc6/0x120 ? __pfx_cifs_mount+0x10/0x10 [cifs] ? lock_acquire+0x3f/0x90 ? find_nls+0x16/0xa0 ? smb3_update_mnt_flags+0x372/0x3b0 [cifs] cifs_smb3_do_mount+0x1e2/0xc80 [cifs] ? __pfx_vfs_parse_fs_string+0x10/0x10 ? __pfx_cifs_smb3_do_mount+0x10/0x10 [cifs] smb3_get_tree+0x1bf/0x330 [cifs] vfs_get_tree+0x4a/0x160 path_mount+0x3c1/0xfb0 ? kasan_quarantine_put+0xc7/0x1d0 ? __pfx_path_mount+0x10/0x10 ? kmem_cache_free+0x118/0x3e0 ? user_path_at+0x74/0xa0 __x64_sys_mount+0x1a6/0x1e0 ? __pfx___x64_sys_mount+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-53182 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()" This reverts commit bc3b1e9e7c50e1de0f573eea3871db61dd4787de. The bic is associated with sync_bfqq, and bfq_release_process_ref cannot be put into bfq_put_cooperator. kasan report: [ 400.347277] ================================================================== [ 400.347287] BUG: KASAN: slab-use-after-free in bic_set_bfqq+0x200/0x230 [ 400.347420] Read of size 8 at addr ffff88881cab7d60 by task dockerd/5800 [ 400.347430] [ 400.347436] CPU: 24 UID: 0 PID: 5800 Comm: dockerd Kdump: loaded Tainted: G E 6.12.0 #32 [ 400.347450] Tainted: [E]=UNSIGNED_MODULE [ 400.347454] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 400.347460] Call Trace: [ 400.347464] <TASK> [ 400.347468] dump_stack_lvl+0x5d/0x80 [ 400.347490] print_report+0x174/0x505 [ 400.347521] kasan_report+0xe0/0x160 [ 400.347541] bic_set_bfqq+0x200/0x230 [ 400.347549] bfq_bic_update_cgroup+0x419/0x740 [ 400.347560] bfq_bio_merge+0x133/0x320 [ 400.347584] blk_mq_submit_bio+0x1761/0x1e20 [ 400.347625] __submit_bio+0x28b/0x7b0 [ 400.347664] submit_bio_noacct_nocheck+0x6b2/0xd30 [ 400.347690] iomap_readahead+0x50c/0x680 [ 400.347731] read_pages+0x17f/0x9c0 [ 400.347785] page_cache_ra_unbounded+0x366/0x4a0 [ 400.347795] filemap_fault+0x83d/0x2340 [ 400.347819] __xfs_filemap_fault+0x11a/0x7d0 [xfs] [ 400.349256] __do_fault+0xf1/0x610 [ 400.349270] do_fault+0x977/0x11a0 [ 400.349281] __handle_mm_fault+0x5d1/0x850 [ 400.349314] handle_mm_fault+0x1f8/0x560 [ 400.349324] do_user_addr_fault+0x324/0x970 [ 400.349337] exc_page_fault+0x76/0xf0 [ 400.349350] asm_exc_page_fault+0x26/0x30 [ 400.349360] RIP: 0033:0x55a480d77375 [ 400.349384] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 3b 66 10 0f 86 ae 02 00 00 55 48 89 e5 48 83 ec 58 48 8b 10 <83> 7a 10 00 0f 84 27 02 00 00 44 0f b6 42 28 44 0f b6 4a 29 41 80 [ 400.349392] RSP: 002b:00007f18c37fd8b8 EFLAGS: 00010216 [ 400.349401] RAX: 00007f18c37fd9d0 RBX: 0000000000000000 RCX: 0000000000000000 [ 400.349407] RDX: 000055a484407d38 RSI: 000000c000e8b0c0 RDI: 0000000000000000 [ 400.349412] RBP: 00007f18c37fd910 R08: 000055a484017f60 R09: 000055a484066f80 [ 400.349417] R10: 0000000000194000 R11: 0000000000000005 R12: 0000000000000008 [ 400.349422] R13: 0000000000000000 R14: 000000c000476a80 R15: 0000000000000000 [ 400.349430] </TASK> [ 400.349452] [ 400.349454] Allocated by task 5800: [ 400.349459] kasan_save_stack+0x30/0x50 [ 400.349469] kasan_save_track+0x14/0x30 [ 400.349475] __kasan_slab_alloc+0x89/0x90 [ 400.349482] kmem_cache_alloc_node_noprof+0xdc/0x2a0 [ 400.349492] bfq_get_queue+0x1ef/0x1100 [ 400.349502] __bfq_get_bfqq_handle_split+0x11a/0x510 [ 400.349511] bfq_insert_requests+0xf55/0x9030 [ 400.349519] blk_mq_flush_plug_list+0x446/0x14c0 [ 400.349527] __blk_flush_plug+0x27c/0x4e0 [ 400.349534] blk_finish_plug+0x52/0xa0 [ 400.349540] _xfs_buf_ioapply+0x739/0xc30 [xfs] [ 400.350246] __xfs_buf_submit+0x1b2/0x640 [xfs] [ 400.350967] xfs_buf_read_map+0x306/0xa20 [xfs] [ 400.351672] xfs_trans_read_buf_map+0x285/0x7d0 [xfs] [ 400.352386] xfs_imap_to_bp+0x107/0x270 [xfs] [ 400.353077] xfs_iget+0x70d/0x1eb0 [xfs] [ 400.353786] xfs_lookup+0x2ca/0x3a0 [xfs] [ 400.354506] xfs_vn_lookup+0x14e/0x1a0 [xfs] [ 400.355197] __lookup_slow+0x19c/0x340 [ 400.355204] lookup_one_unlocked+0xfc/0x120 [ 400.355211] ovl_lookup_single+0x1b3/0xcf0 [overlay] [ 400.355255] ovl_lookup_layer+0x316/0x490 [overlay] [ 400.355295] ovl_lookup+0x844/0x1fd0 [overlay] [ 400.355351] lookup_one_qstr_excl+0xef/0x150 [ 400.355357] do_unlinkat+0x22a/0x620 [ 400.355366] __x64_sys_unlinkat+0x109/0x1e0 [ 400.355375] do_syscall_64+0x82/0x160 [ 400.355384] entry_SYSCALL_64_after_hwframe+0x76/0x7 ---truncated--- | ||||
| CVE-2024-53179 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @ses->auth_key.response by checking whether @ses->ses_status is SES_GOOD or SES_EXITING with @ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()"), we made sure to call ->logoff() only when @ses was known to be good (e.g. valid ->auth_key.response), so it's safe to access signing key when @ses->ses_status == SES_EXITING. | ||||
| CVE-2024-53177 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: prevent use-after-free due to open_cached_dir error paths If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000) | ||||
| CVE-2024-53174 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: make sure cache entry active before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2024-53173 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.0: Fix a use-after-free problem in the asynchronous open() Yang Erkun reports that when two threads are opening files at the same time, and are forced to abort before a reply is seen, then the call to nfs_release_seqid() in nfs4_opendata_free() can result in a use-after-free of the pointer to the defunct rpc task of the other thread. The fix is to ensure that if the RPC call is aborted before the call to nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid() in nfs4_open_release() before the rpc_task is freed. | ||||
| CVE-2024-53171 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit After an insertion in TNC, the tree might split and cause a node to change its `znode->parent`. A further deletion of other nodes in the tree (which also could free the nodes), the aforementioned node's `znode->cparent` could still point to a freed node. This `znode->cparent` may not be updated when getting nodes to commit in `ubifs_tnc_start_commit()`. This could then trigger a use-after-free when accessing the `znode->cparent` in `write_index()` in `ubifs_tnc_end_commit()`. This can be triggered by running rm -f /etc/test-file.bin dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then reports: BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950 Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153 Call trace: dump_backtrace+0x0/0x340 show_stack+0x18/0x24 dump_stack_lvl+0x9c/0xbc print_address_description.constprop.0+0x74/0x2b0 kasan_report+0x1d8/0x1f0 kasan_check_range+0xf8/0x1a0 memcpy+0x84/0xf4 ubifs_tnc_end_commit+0xa5c/0x1950 do_commit+0x4e0/0x1340 ubifs_bg_thread+0x234/0x2e0 kthread+0x36c/0x410 ret_from_fork+0x10/0x20 Allocated by task 401: kasan_save_stack+0x38/0x70 __kasan_kmalloc+0x8c/0xd0 __kmalloc+0x34c/0x5bc tnc_insert+0x140/0x16a4 ubifs_tnc_add+0x370/0x52c ubifs_jnl_write_data+0x5d8/0x870 do_writepage+0x36c/0x510 ubifs_writepage+0x190/0x4dc __writepage+0x58/0x154 write_cache_pages+0x394/0x830 do_writepages+0x1f0/0x5b0 filemap_fdatawrite_wbc+0x170/0x25c file_write_and_wait_range+0x140/0x190 ubifs_fsync+0xe8/0x290 vfs_fsync_range+0xc0/0x1e4 do_fsync+0x40/0x90 __arm64_sys_fsync+0x34/0x50 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 Freed by task 403: kasan_save_stack+0x38/0x70 kasan_set_track+0x28/0x40 kasan_set_free_info+0x28/0x4c __kasan_slab_free+0xd4/0x13c kfree+0xc4/0x3a0 tnc_delete+0x3f4/0xe40 ubifs_tnc_remove_range+0x368/0x73c ubifs_tnc_remove_ino+0x29c/0x2e0 ubifs_jnl_delete_inode+0x150/0x260 ubifs_evict_inode+0x1d4/0x2e4 evict+0x1c8/0x450 iput+0x2a0/0x3c4 do_unlinkat+0x2cc/0x490 __arm64_sys_unlinkat+0x90/0x100 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free when a node becomes root in TNC but still has a `cparent` to an already freed node. More specifically, consider the following TNC: zroot / / zp1 / / zn Inserting a new node `zn_new` with a key smaller then `zn` will trigger a split in `tnc_insert()` if `zp1` is full: zroot / \ / \ zp1 zp2 / \ / \ zn_new zn `zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still points to `zp1`. Now, consider a removal of all the nodes _except_ `zn`. Just when `tnc_delete()` is about to delete `zroot` and `zp2`: zroot \ \ zp2 \ \ zn `zroot` and `zp2` get freed and the tree collapses: zn `zn` now becomes the new `zroot`. `get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and `write_index()` will check its `znode->cparent` that wrongly points to the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called with `znode->cparent->zbranch[znode->iip].hash` that triggers the use-after-free! Fix this by explicitly setting `znode->cparent` to `NULL` in `get_znodes_to_commit()` for the root node. The search for the dirty nodes ---truncated--- | ||||
| CVE-2024-53170 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: fix uaf for flush rq while iterating tags blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [in ---truncated--- | ||||
| CVE-2024-53168 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0 Read of size 1 at addr ffff888111f322cd by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 Call Trace: <IRQ> dump_stack_lvl+0x68/0xa0 print_address_description.constprop.0+0x2c/0x3d0 print_report+0xb4/0x270 kasan_report+0xbd/0xf0 tcp_write_timer_handler+0x156/0x3e0 tcp_write_timer+0x66/0x170 call_timer_fn+0xfb/0x1d0 __run_timers+0x3f8/0x480 run_timer_softirq+0x9b/0x100 handle_softirqs+0x153/0x390 __irq_exit_rcu+0x103/0x120 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:default_idle+0xf/0x20 Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242 RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000 R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0 default_idle_call+0x6b/0xa0 cpuidle_idle_call+0x1af/0x1f0 do_idle+0xbc/0x130 cpu_startup_entry+0x33/0x40 rest_init+0x11f/0x210 start_kernel+0x39a/0x420 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x97/0xa0 common_startup_64+0x13e/0x141 </TASK> Allocated by task 595: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x87/0x90 kmem_cache_alloc_noprof+0x12b/0x3f0 copy_net_ns+0x94/0x380 create_new_namespaces+0x24c/0x500 unshare_nsproxy_namespaces+0x75/0xf0 ksys_unshare+0x24e/0x4f0 __x64_sys_unshare+0x1f/0x30 do_syscall_64+0x70/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 100: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x54/0x70 kmem_cache_free+0x156/0x5d0 cleanup_net+0x5d3/0x670 process_one_work+0x776/0xa90 worker_thread+0x2e2/0x560 kthread+0x1a8/0x1f0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 Reproduction script: mkdir -p /mnt/nfsshare mkdir -p /mnt/nfs/netns_1 mkfs.ext4 /dev/sdb mount /dev/sdb /mnt/nfsshare systemctl restart nfs-server chmod 777 /mnt/nfsshare exportfs -i -o rw,no_root_squash *:/mnt/nfsshare ip netns add netns_1 ip link add name veth_1_peer type veth peer veth_1 ifconfig veth_1_peer 11.11.0.254 up ip link set veth_1 netns netns_1 ip netns exec netns_1 ifconfig veth_1 11.11.0.1 ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \ --tcp-flags FIN FIN -j DROP (note: In my environment, a DESTROY_CLIENTID operation is always sent immediately, breaking the nfs tcp connection.) ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \ 11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1 ip netns del netns_1 The reason here is that the tcp socket in netns_1 (nfs side) has been shutdown and closed (done in xs_destroy), but the FIN message (with ack) is discarded, and the nfsd side keeps sending retransmission messages. As a result, when the tcp sock in netns_1 processes the received message, it sends the message (FIN message) in the sending queue, and the tcp timer is re-established. When the network namespace is deleted, the net structure accessed by tcp's timer handler function causes problems. To fix this problem, let's hold netns refcnt for the tcp kernel socket as done in other modules. This is an ugly hack which can easily be backported to earlier kernels. A proper fix which cleans up the interfaces will follow, but may not be so easy to backport. | ||||
| CVE-2024-53166 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix bfqq uaf in bfq_limit_depth() Set new allocated bfqq to bic or remove freed bfqq from bic are both protected by bfqd->lock, however bfq_limit_depth() is deferencing bfqq from bic without the lock, this can lead to UAF if the io_context is shared by multiple tasks. For example, test bfq with io_uring can trigger following UAF in v6.6: ================================================================== BUG: KASAN: slab-use-after-free in bfqq_group+0x15/0x50 Call Trace: <TASK> dump_stack_lvl+0x47/0x80 print_address_description.constprop.0+0x66/0x300 print_report+0x3e/0x70 kasan_report+0xb4/0xf0 bfqq_group+0x15/0x50 bfqq_request_over_limit+0x130/0x9a0 bfq_limit_depth+0x1b5/0x480 __blk_mq_alloc_requests+0x2b5/0xa00 blk_mq_get_new_requests+0x11d/0x1d0 blk_mq_submit_bio+0x286/0xb00 submit_bio_noacct_nocheck+0x331/0x400 __block_write_full_folio+0x3d0/0x640 writepage_cb+0x3b/0xc0 write_cache_pages+0x254/0x6c0 write_cache_pages+0x254/0x6c0 do_writepages+0x192/0x310 filemap_fdatawrite_wbc+0x95/0xc0 __filemap_fdatawrite_range+0x99/0xd0 filemap_write_and_wait_range.part.0+0x4d/0xa0 blkdev_read_iter+0xef/0x1e0 io_read+0x1b6/0x8a0 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 808602: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc_node+0x1b1/0x6d0 bfq_get_queue+0x138/0xfa0 bfq_get_bfqq_handle_split+0xe3/0x2c0 bfq_init_rq+0x196/0xbb0 bfq_insert_request.isra.0+0xb5/0x480 bfq_insert_requests+0x156/0x180 blk_mq_insert_request+0x15d/0x440 blk_mq_submit_bio+0x8a4/0xb00 submit_bio_noacct_nocheck+0x331/0x400 __blkdev_direct_IO_async+0x2dd/0x330 blkdev_write_iter+0x39a/0x450 io_write+0x22a/0x840 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x1b/0x30 Freed by task 808589: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 __kasan_slab_free+0x126/0x1b0 kmem_cache_free+0x10c/0x750 bfq_put_queue+0x2dd/0x770 __bfq_insert_request.isra.0+0x155/0x7a0 bfq_insert_request.isra.0+0x122/0x480 bfq_insert_requests+0x156/0x180 blk_mq_dispatch_plug_list+0x528/0x7e0 blk_mq_flush_plug_list.part.0+0xe5/0x590 __blk_flush_plug+0x3b/0x90 blk_finish_plug+0x40/0x60 do_writepages+0x19d/0x310 filemap_fdatawrite_wbc+0x95/0xc0 __filemap_fdatawrite_range+0x99/0xd0 filemap_write_and_wait_range.part.0+0x4d/0xa0 blkdev_read_iter+0xef/0x1e0 io_read+0x1b6/0x8a0 io_issue_sqe+0x87/0x300 io_wq_submit_work+0xeb/0x390 io_worker_handle_work+0x24d/0x550 io_wq_worker+0x27f/0x6c0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x1b/0x30 Fix the problem by protecting bic_to_bfqq() with bfqd->lock. | ||||
| CVE-2024-53165 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sh: intc: Fix use-after-free bug in register_intc_controller() In the error handling for this function, d is freed without ever removing it from intc_list which would lead to a use after free. To fix this, let's only add it to the list after everything has succeeded. | ||||