| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: amd-pstate: Remove unnecessary driver_lock in set_boost
set_boost is a per-policy function call, hence a driver wide lock is
unnecessary. Also this mutex_acquire can collide with the mutex_acquire
from the mode-switch path in status_store(), which can lead to a
deadlock. So, remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Avoid WARN_ON when configuring MQPRIO with HTB offload enabled
When attempting to enable MQPRIO while HTB offload is already
configured, the driver currently returns `-EINVAL` and triggers a
`WARN_ON`, leading to an unnecessary call trace.
Update the code to handle this case more gracefully by returning
`-EOPNOTSUPP` instead, while also providing a helpful user message. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
The H616 manual does not state that the GPU PLL supports
dynamic frequency configuration, so we must take extra care when changing
the frequency. Currently any attempt to do device DVFS on the GPU lead
to panfrost various ooops, and GPU hangs.
The manual describes the algorithm for changing the PLL
frequency, which the CPU PLL notifier code already support, so we reuse
that to reparent the GPU clock to GPU1 clock during frequency
changes. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
The user of k3_udma_glue_reset_rx_chn() e.g. ti_am65_cpsw_nuss can
run on multiple platforms having different DMA architectures.
On some platforms there can be one FDQ for all flows in the RX channel
while for others there is a separate FDQ for each flow in the RX channel.
So far we have been relying on the skip_fdq argument of
k3_udma_glue_reset_rx_chn().
Instead of relying on the user to provide this information, infer it
based on DMA architecture during k3_udma_glue_request_rx_chn() and save it
in an internal flag 'single_fdq'. Use that flag at
k3_udma_glue_reset_rx_chn() to deicide if the FDQ needs
to be cleared for every flow or just for flow 0.
Fixes the below issue on ti_am65_cpsw_nuss driver on AM62-SK.
> ip link set eth1 down
> ip link set eth0 down
> ethtool -L eth0 rx 8
> ip link set eth0 up
> modprobe -r ti_am65_cpsw_nuss
[ 103.045726] ------------[ cut here ]------------
[ 103.050505] k3_knav_desc_pool size 512000 != avail 64000
[ 103.050703] WARNING: CPU: 1 PID: 450 at drivers/net/ethernet/ti/k3-cppi-desc-pool.c:33 k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.068810] Modules linked in: ti_am65_cpsw_nuss(-) k3_cppi_desc_pool snd_soc_hdmi_codec crct10dif_ce snd_soc_simple_card snd_soc_simple_card_utils display_connector rtc_ti_k3 k3_j72xx_bandgap tidss drm_client_lib snd_soc_davinci_mcas
p drm_dma_helper tps6598x phylink snd_soc_ti_udma rti_wdt drm_display_helper snd_soc_tlv320aic3x_i2c typec at24 phy_gmii_sel snd_soc_ti_edma snd_soc_tlv320aic3x sii902x snd_soc_ti_sdma sa2ul omap_mailbox drm_kms_helper authenc cfg80211 r
fkill fuse drm drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [last unloaded: k3_cppi_desc_pool]
[ 103.119950] CPU: 1 UID: 0 PID: 450 Comm: modprobe Not tainted 6.13.0-rc7-00001-g9c5e3435fa66 #1011
[ 103.119968] Hardware name: Texas Instruments AM625 SK (DT)
[ 103.119974] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 103.119983] pc : k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.148007] lr : k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.154709] sp : ffff8000826ebbc0
[ 103.158015] x29: ffff8000826ebbc0 x28: ffff0000090b6300 x27: 0000000000000000
[ 103.165145] x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000019df6b0
[ 103.172271] x23: ffff0000019df6b8 x22: ffff0000019df410 x21: ffff8000826ebc88
[ 103.179397] x20: 000000000007d000 x19: ffff00000a3b3000 x18: 0000000000000000
[ 103.186522] x17: 0000000000000000 x16: 0000000000000000 x15: 000001e8c35e1cde
[ 103.193647] x14: 0000000000000396 x13: 000000000000035c x12: 0000000000000000
[ 103.200772] x11: 000000000000003a x10: 00000000000009c0 x9 : ffff8000826eba20
[ 103.207897] x8 : ffff0000090b6d20 x7 : ffff00007728c180 x6 : ffff00007728c100
[ 103.215022] x5 : 0000000000000001 x4 : ffff000000508a50 x3 : ffff7ffff6146000
[ 103.222147] x2 : 0000000000000000 x1 : e300b4173ee6b200 x0 : 0000000000000000
[ 103.229274] Call trace:
[ 103.231714] k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool] (P)
[ 103.238408] am65_cpsw_nuss_free_rx_chns+0x28/0x4c [ti_am65_cpsw_nuss]
[ 103.244942] devm_action_release+0x14/0x20
[ 103.249040] release_nodes+0x3c/0x68
[ 103.252610] devres_release_all+0x8c/0xdc
[ 103.256614] device_unbind_cleanup+0x18/0x60
[ 103.260876] device_release_driver_internal+0xf8/0x178
[ 103.266004] driver_detach+0x50/0x9c
[ 103.269571] bus_remove_driver+0x6c/0xbc
[ 103.273485] driver_unregister+0x30/0x60
[ 103.277401] platform_driver_unregister+0x14/0x20
[ 103.282096] am65_cpsw_nuss_driver_exit+0x18/0xff4 [ti_am65_cpsw_nuss]
[ 103.288620] __arm64_sys_delete_module+0x17c/0x25c
[ 103.293404] invoke_syscall+0x44/0x100
[ 103.297149] el0_svc_common.constprop.0+0xc0/0xe0
[ 103.301845] do_el0_svc+0x1c/0x28
[ 103.305155] el0_svc+0x28/0x98
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix debug actions order
The order of actions taken for debug was implemented incorrectly.
Now we implemented the dump split and do the FW reset only in the
middle of the dump (rather than the FW killing itself on error.)
As a result, some of the actions taken when applying the config
will now crash the device, so we need to fix the order. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Fix system hang during S4 resume with FRED enabled
Upon a wakeup from S4, the restore kernel starts and initializes the
FRED MSRs as needed from its perspective. It then loads a hibernation
image, including the image kernel, and attempts to load image pages
directly into their original page frames used before hibernation unless
those frames are currently in use. Once all pages are moved to their
original locations, it jumps to a "trampoline" page in the image kernel.
At this point, the image kernel takes control, but the FRED MSRs still
contain values set by the restore kernel, which may differ from those
set by the image kernel before hibernation. Therefore, the image kernel
must ensure the FRED MSRs have the same values as before hibernation.
Since these values depend only on the location of the kernel text and
data, they can be recomputed from scratch. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: copy_verifier_state() should copy 'loop_entry' field
The bpf_verifier_state.loop_entry state should be copied by
copy_verifier_state(). Otherwise, .loop_entry values from unrelated
states would poison env->cur_state.
Additionally, env->stack should not contain any states with
.loop_entry != NULL. The states in env->stack are yet to be verified,
while .loop_entry is set for states that reached an equivalent state.
This means that env->cur_state->loop_entry should always be NULL after
pop_stack().
See the selftest in the next commit for an example of the program that
is not safe yet is accepted by verifier w/o this fix.
This change has some verification performance impact for selftests:
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
---------------------------------- ---------------------------- --------- --------- -------------- ---------- ---------- -------------
arena_htab.bpf.o arena_htab_llvm 717 426 -291 (-40.59%) 57 37 -20 (-35.09%)
arena_htab_asm.bpf.o arena_htab_asm 597 445 -152 (-25.46%) 47 37 -10 (-21.28%)
arena_list.bpf.o arena_list_del 309 279 -30 (-9.71%) 23 14 -9 (-39.13%)
iters.bpf.o iter_subprog_check_stacksafe 155 141 -14 (-9.03%) 15 14 -1 (-6.67%)
iters.bpf.o iter_subprog_iters 1094 1003 -91 (-8.32%) 88 83 -5 (-5.68%)
iters.bpf.o loop_state_deps2 479 725 +246 (+51.36%) 46 63 +17 (+36.96%)
kmem_cache_iter.bpf.o open_coded_iter 63 59 -4 (-6.35%) 7 6 -1 (-14.29%)
verifier_bits_iter.bpf.o max_words 92 84 -8 (-8.70%) 8 7 -1 (-12.50%)
verifier_iterating_callbacks.bpf.o cond_break2 113 107 -6 (-5.31%) 12 12 +0 (+0.00%)
And significant negative impact for sched_ext:
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
----------------- ---------------------- --------- --------- -------------------- ---------- ---------- ------------------
bpf.bpf.o lavd_init 7039 14723 +7684 (+109.16%) 490 1139 +649 (+132.45%)
bpf.bpf.o layered_dispatch 11485 10548 -937 (-8.16%) 848 762 -86 (-10.14%)
bpf.bpf.o layered_dump 7422 1000001 +992579 (+13373.47%) 681 31178 +30497 (+4478.27%)
bpf.bpf.o layered_enqueue 16854 71127 +54273 (+322.02%) 1611 6450 +4839 (+300.37%)
bpf.bpf.o p2dq_dispatch 665 791 +126 (+18.95%) 68 78 +10 (+14.71%)
bpf.bpf.o p2dq_init 2343 2980 +637 (+27.19%) 201 237 +36 (+17.91%)
bpf.bpf.o refresh_layer_cpumasks 16487 674760 +658273 (+3992.68%) 1770 65370 +63600 (+3593.22%)
bpf.bpf.o rusty_select_cpu 1937 40872 +38935 (+2010.07%) 177 3210 +3033 (+1713.56%)
scx_central.bpf.o central_dispatch 636 2687 +2051 (+322.48%) 63 227 +164 (+260.32%)
scx_nest.bpf.o nest_init 636 815 +179 (+28.14%) 60 73 +13 (+21.67%)
scx_qmap.bpf.o qmap_dispatch
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: break and reset virtio devices on device_shutdown()
Hongyu reported a hang on kexec in a VM. QEMU reported invalid memory
accesses during the hang.
Invalid read at addr 0x102877002, size 2, region '(null)', reason: rejected
Invalid write at addr 0x102877A44, size 2, region '(null)', reason: rejected
...
It was traced down to virtio-console. Kexec works fine if virtio-console
is not in use.
The issue is that virtio-console continues to write to the MMIO even after
underlying virtio-pci device is reset.
Additionally, Eric noticed that IOMMUs are reset before devices, if
devices are not reset on shutdown they continue to poke at guest memory
and get errors from the IOMMU. Some devices get wedged then.
The problem can be solved by breaking all virtio devices on virtio
bus shutdown, then resetting them. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Avoid race in open_cached_dir with lease breaks
A pre-existing valid cfid returned from find_or_create_cached_dir might
race with a lease break, meaning open_cached_dir doesn't consider it
valid, and thinks it's newly-constructed. This leaks a dentry reference
if the allocation occurs before the queued lease break work runs.
Avoid the race by extending holding the cfid_list_lock across
find_or_create_cached_dir and when the result is checked. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent rename with empty string
Client can send empty newname string to ksmbd server.
It will cause a kernel oops from d_alloc.
This patch return the error when attempting to rename
a file or directory with an empty new name string. |
| In the Linux kernel, the following vulnerability has been resolved:
memblock: Accept allocated memory before use in memblock_double_array()
When increasing the array size in memblock_double_array() and the slab
is not yet available, a call to memblock_find_in_range() is used to
reserve/allocate memory. However, the range returned may not have been
accepted, which can result in a crash when booting an SNP guest:
RIP: 0010:memcpy_orig+0x68/0x130
Code: ...
RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006
RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000
RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00
RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000
R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78
R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00
memblock_double_array+0xff/0x310
memblock_add_range+0x1fb/0x2f0
memblock_reserve+0x4f/0xa0
memblock_alloc_range_nid+0xac/0x130
memblock_alloc_internal+0x53/0xc0
memblock_alloc_try_nid+0x3d/0xa0
swiotlb_init_remap+0x149/0x2f0
mem_init+0xb/0xb0
mm_core_init+0x8f/0x350
start_kernel+0x17e/0x5d0
x86_64_start_reservations+0x14/0x30
x86_64_start_kernel+0x92/0xa0
secondary_startup_64_no_verify+0x194/0x19b
Mitigate this by calling accept_memory() on the memory range returned
before the slab is available.
Prior to v6.12, the accept_memory() interface used a 'start' and 'end'
parameter instead of 'start' and 'size', therefore the accept_memory()
call must be adjusted to specify 'start + size' for 'end' when applying
to kernels prior to v6.12. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix invalid context error in dml helper
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
(cherry picked from commit bd3e84bc98f81b44f2c43936bdadc3241d654259) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
If dma-coherent property isn't set then descriptors are non-cacheable
and the iocc shareability bits should be disabled. Without this UFS can
end up in an incompatible configuration and suffer from random cache
related stability issues. |
| In the Linux kernel, the following vulnerability has been resolved:
block: integrity: Do not call set_page_dirty_lock()
Placing multiple protection information buffers inside the same page
can lead to oopses because set_page_dirty_lock() can't be called from
interrupt context.
Since a protection information buffer is not backed by a file there is
no point in setting its page dirty, there is nothing to synchronize.
Drop the call to set_page_dirty_lock() and remove the last argument to
bio_integrity_unpin_bvec(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:
RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
write_all_xattrs fs/f2fs/xattr.c:487 [inline]
__f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
__vfs_setxattr+0x115/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
vfs_setxattr+0x13f/0x330 fs/xattr.c:303
setxattr+0x146/0x160 fs/xattr.c:611
path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
__do_sys_lsetxattr fs/xattr.c:653 [inline]
__se_sys_lsetxattr fs/xattr.c:649 [inline]
__x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: class: Invalidate USB device pointers on partner unregistration
To avoid using invalid USB device pointers after a Type-C partner
disconnects, this patch clears the pointers upon partner unregistration.
This ensures a clean state for future connections. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: Prevent possible adminq overflow/stuck condition
The pds_core's adminq is protected by the adminq_lock, which prevents
more than 1 command to be posted onto it at any one time. This makes it
so the client drivers cannot simultaneously post adminq commands.
However, the completions happen in a different context, which means
multiple adminq commands can be posted sequentially and all waiting
on completion.
On the FW side, the backing adminq request queue is only 16 entries
long and the retry mechanism and/or overflow/stuck prevention is
lacking. This can cause the adminq to get stuck, so commands are no
longer processed and completions are no longer sent by the FW.
As an initial fix, prevent more than 16 outstanding adminq commands so
there's no way to cause the adminq from getting stuck. This works
because the backing adminq request queue will never have more than 16
pending adminq commands, so it will never overflow. This is done by
reducing the adminq depth to 16. |
| In the Linux kernel, the following vulnerability has been resolved:
can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probe
The spin lock tx_handling_spinlock in struct m_can_classdev is not
being initialized. This leads the following spinlock bad magic
complaint from the kernel, eg. when trying to send CAN frames with
cansend from can-utils:
| BUG: spinlock bad magic on CPU#0, cansend/95
| lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
| CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE
| Hardware name: MachineWare SIM-V (DT)
| Call Trace:
| [<ffffffff800133e0>] dump_backtrace+0x1c/0x24
| [<ffffffff800022f2>] show_stack+0x28/0x34
| [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68
| [<ffffffff8000de70>] dump_stack+0x14/0x1c
| [<ffffffff80003134>] spin_dump+0x62/0x6e
| [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142
| [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c
| [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a
| [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee
| [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292
| [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8
| [<ffffffff8073b8fa>] can_send+0xc6/0x242
| [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c
| [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee
| [<ffffffff801d06ea>] vfs_write+0x184/0x3a6
| [<ffffffff801d0a88>] ksys_write+0xa0/0xc0
| [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c
| [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212
| [<ffffffff807a830a>] handle_exception+0x146/0x152
Initializing the spin lock in m_can_class_allocate_dev solves that
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2 fix problems with __nfs42_ssc_open
A destination server while doing a COPY shouldn't accept using the
passed in filehandle if its not a regular filehandle.
If alloc_file_pseudo() has failed, we need to decrement a reference
on the newly created inode, otherwise it leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add bounds check for durable handle context
Add missing bounds check for durable handle context. |
