| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Orinoco driver (orinoco.c) in Linux kernel 2.6.13 and earlier does not properly clear memory from a previously used packet whose length is increased, which allows remote attackers to obtain sensitive information. |
| dm-crypt in Linux kernel 2.6.15 and earlier does not clear a structure before it is freed, which leads to a memory disclosure that could allow local users to obtain sensitive information about a cryptographic key. |
| The mprotect code (mprotect.c) in Linux 2.6 on Itanium IA64 Montecito processors does not properly maintain cache coherency as required by the architecture, which allows local users to cause a denial of service and possibly corrupt data by modifying PTE protections. |
| Linux 2.0.34 does not properly prevent users from sending SIGIO signals to arbitrary processes, which allows local users to cause a denial of service by sending SIGIO to processes that do not catch it. |
| Integer underflow in the firewall logging rules for iptables in Linux before 2.6.8 allows remote attackers to cause a denial of service (application crash) via a malformed IP packet. |
| Stack-based buffer overflow in the sendmsg function call in the Linux kernel 2.6 before 2.6.13.1 allows local users to execute arbitrary code by calling sendmsg and modifying the message contents in another thread. |
| The snmp_trap_decode function in the SNMP NAT helper for Linux kernel before 2.6.16.18 allows remote attackers to cause a denial of service (crash) via unspecified remote attack vectors that cause failures in snmp_trap_decode that trigger (1) frees of random memory or (2) frees of previously-freed memory (double-free) by snmp_trap_decode as well as its calling function, as demonstrated via certain test cases of the PROTOS SNMP test suite. |
| Various routines for the ppc64 architecture on Linux kernel 2.6 prior to 2.6.2 and 2.4 prior to 2.4.24 do not use the copy_from_user function when copying data from userspace to kernelspace, which crosses security boundaries and allows local users to cause a denial of service. |
| The UDP implementation in Linux 2.4.x kernels keeps the IP Identification field at 0 for all non-fragmented packets, which could allow remote attackers to determine that a target system is running Linux. |
| Gallery 1.3.3 creates directories with insecure permissions, which allows local users to read, modify, or delete photos. |
| The kernel strncpy function in Linux 2.4 and 2.5 does not %NUL pad the buffer on architectures other than x86, as opposed to the expected behavior of strncpy as implemented in libc, which could lead to information leaks. |
| dm-crypt on Linux kernel 2.6.x, when used on certain file systems with a block size 1024 or greater, has certain "IV computation" weaknesses that allow watermarked files to be detected without decryption. |
| Linux kernel before 2.6.15.5, when running on Intel processors, allows local users to cause a denial of service ("endless recursive fault") via unknown attack vectors related to a "bad elf entry address." |
| A "potential" buffer overflow exists in the panic() function in Linux 2.4.x, although it may not be exploitable due to the functionality of panic. |
| The Equalizer Load-balancer for serial network interfaces (eql.c) in Linux kernel 2.6.x up to 2.6.7 allows local users to cause a denial of service via a non-existent device name that triggers a null dereference. |
| Linux kernel 2.6 before 2.6.15.5 allows local users to obtain sensitive information via a crafted XFS ftruncate call, which may return stale data. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
| In the Linux kernel, the following vulnerability has been resolved:
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to
ioq_vector. If request_irq() fails part-way, the rollback loop calls
free_irq() with dev_id set to 'oct', which does not match the original
dev_id and may leave the irqaction registered.
This can keep IRQ handlers alive while ioq_vector is later freed during
unwind/teardown, leading to a use-after-free or crash when an interrupt
fires.
Fix the error path to free IRQs with the same ioq_vector dev_id used
during request_irq(). |
| A heap-based buffer overflow was discovered in bluetoothd in BlueZ through 5.48. There isn't any check on whether there is enough space in the destination buffer. The function simply appends all data passed to it. The values of all attributes that are requested are appended to the output buffer. There are no size checks whatsoever, resulting in a simple heap overflow if one can craft a request where the response is large enough to overflow the preallocated buffer. This issue exists in service_attr_req gets called by process_request (in sdpd-request.c), which also allocates the response buffer. |
