| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: restrict socket creation to the initial network namespace
QRTR keeps its entire port and node state in module-global variables
that are not partitioned per network namespace: qrtr_local_nid is a
single global node id (always 1) and qrtr_ports is a single global
xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that
global state with no network-namespace check, and qrtr_create() places
no restriction on the namespace a socket is created in.
As a result an unprivileged process that creates an AF_QIPCRTR socket
in a separate network namespace, e.g. via
unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams -
including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR
sockets owned by another namespace, and vice versa. The receiving
socket sees such a message as coming from node id 1, indistinguishable
from a legitimate local client, breaking the isolation that network
namespaces are expected to provide.
QRTR is a transport to global hardware endpoints (the modem and other
remote processors) and has no per-namespace semantics; its in-kernel
name service already creates its socket in init_net only. Confine the
socket family to the initial network namespace, as other
non-namespace-aware socket families do (see llc_ui_create() and the
ieee802154 socket code). |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: auth: verify auth requirement when auth_chunk is NULL
sctp_auth_chunk_verify() returns true unconditionally when
chunk->auth_chunk is NULL, silently skipping authentication.
This is incorrect when:
1. skb_clone() failed in the BH receive path, leaving auth_chunk
NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new
connections, so the early sctp_auth_recv_cid() check cannot
catch this.
2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never
called and auth_chunk remains NULL.
Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL:
if authentication is required, return false to drop the chunk;
otherwise continue normally. |
| An Out-of-bounds Write vulnerability in the WatchGuard Fireware OS iked process may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the mobile user VPN with IKEv2 and the branch office VPN using IKEv2 when configured with a dynamic gateway peer.
If the Firebox was previously configured with the mobile user VPN with IKEv2 or a branch office VPN using IKEv2 to a dynamic gateway peer, and both of those configurations have since been deleted, that Firebox may still be vulnerable if a branch office VPN to a static gateway peer is still configured. |
| An HTTP Request Smuggling [CWE-444] vulnerability in the Authentication portal of WatchGuard Fireware OS allows a remote attacker to evade request parameter sanitation and perform a reflected self-Cross-Site Scripting (XSS) attack.
WatchGuard does not believe there is a practical exploit chain with a meaningful security impact for this vulnerability. |
| Metacat is data repository software that helps researchers preserve, share, and discover data. Versions 2.x through 2.19.1 and all 1.x versions contain an unauthenticated path traversal in the `archiveEntryName` parameter of the `action=read` endpoint that is part of the original 1.x Metacat API. `ArchiveHandler.readArchiveEntry()` concatenates the user-supplied parameter into a filesystem path without validation, and the surrounding `hasReadPermission()` check is commented out. An unauthenticated remote attacker can read any file accessible to the Tomcat process by sending a single GET request. Proof-of-concept exploits have been demonstrated and verified against this vulnerability, and it should be considered easily exploitable for any Metacat deployment < 3.0.0 by any user with access to the 1.x API. Through this vulnerability, production 2.x deployments are exposed to credential theft, client certificate and private key exfiltration enabling member node impersonation within the federation, embargoed research data disclosure, and broad system reconnaissance. Given Metacat's deployment footprint across the DataONE network of repositories and federally funded research programs, the population of exposed 2.x instances is non-trivial. The vulnerability was eliminated in Metacat version 3.0.0 and after by eliminating the entire Metacat 1.x API that exposed this vulnerability. The vulnerability was remediated in April 2024 with the release of Metacat 3.0.0, which removed the legacy Metacat API including ArchiveHandler.java. The commit message and issue reference architectural cleanup, not a security fix, and no advisory or CVE was issued. The 2.x branch was not and will not be backported, as is standard practice in Metacat, which only supports the most current release. 2.19.1 remains vulnerable with identical code and is beyond its supported lifetime. As a workaround, disable or restrict 1.x API servlets. Because the vulnerable 1.x API is no longer used or necessary in most Metacat deployments, restricting access to the old API endpoints can reduce or eliminate exposure for 2.19.x deployments. After removing those features, restart Tomcat or whichever software is hosting the servlets. |
| Versions of the package uplot before 1.6.31 are vulnerable to Prototype Pollution via the uplot.assign function due to missing check if the attribute resolves to the object prototype. |
| A vulnerability was determined in Tenda CH22 1.0.0.1. This vulnerability affects the function formCertListInfo of the file /goform/CertListInfo. This manipulation of the argument Name causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. |
| A stack-based buffer overflow vulnerability [CWE-121] in WatchGuard Fireware OS's certificate request command could allow an authenticated privileged user to execute arbitrary code via specially crafted CLI commands. |
| A security vulnerability has been detected in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/pptpSrvGlobalConfig. Such manipulation of the argument EncryptionMode leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32-dcmipp: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
rtl2832_sdr_start_streaming() had multiple error paths that hit this
trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six
`goto err` paths covering subdev s_power, tuner setup, ADC setup,
stream-buffer allocation, urb allocation, and urb submission failures.
None of them returned the queued buffers.
The original function had no distinct success exit and fell straight
through into the err label, which previously only did mutex_unlock and
"return ret". Adding queued-buffer cleanup at err must therefore be
paired with an explicit success return; otherwise every successful
start would also drain the buffer queue and kill streaming. Add that
success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err
label and before each early return.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
The err label still does not roll back power_ctrl(), frontend_ctrl(),
the POWER_ON flag, or stream/URB allocations that may have happened
before the failing step. Those are pre-existing leaks of a different
class and are not addressed here. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832: fix use-after-free in rtl2832_remove()
cancel_delayed_work_sync() is called before i2c_mux_del_adapters()
in rtl2832_remove(). While the cancel waits for any running instance
of i2c_gate_work to finish, it does not prevent the timer from being
rescheduled by a concurrent thread.
During probe, the r820t_attach() call attempts I2C transfers through
the mux adapter. These transfers go through i2c_mux_master_xfer(),
which calls rtl2832_deselect() after the transfer completes,
rescheduling i2c_gate_work via schedule_delayed_work(). If this
transfer is still in flight when rtl2832_remove() runs,
rtl2832_deselect() can reschedule i2c_gate_work after it has been
cancelled, causing a use-after-free when kfree(dev) is called.
Fix this by calling i2c_mux_del_adapters() before
cancel_delayed_work_sync(). Once the mux adapter is unregistered, no
new I2C transfers can go through it, so rtl2832_deselect() can no
longer reschedule i2c_gate_work. The subsequent
cancel_delayed_work_sync() is then guaranteed to be final. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pwc: Drain fill_buf on start_streaming() failure
pwc_isoc_init() submits its isochronous URBs with
usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is
submitted, its completion handler pwc_isoc_handler() can run on another
CPU before the loop finishes:
start_streaming()
pwc_isoc_init()
usb_submit_urb(urbs[0], GFP_KERNEL)
pwc_isoc_handler(urbs[0])
pdev->fill_buf =
pwc_get_next_fill_buf(pdev)
usb_submit_urb(urbs[i>0], ..) -> fails
pwc_isoc_cleanup(pdev) /* kills URBs */
return ret;
pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED)
pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and
stores it in pdev->fill_buf. The error path in start_streaming() only
drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is
leaked. vb2_start_streaming() then triggers
WARN_ON(owned_by_drv_count).
stop_streaming() already handles this since commit 80b0963e1698
("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the
teardown path but not in the start_streaming() error path. Mirror that
handling on failure so start_streaming() returns with no buffer owned
by the driver.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: npcm-video: fix memory leaks in probe and remove
npcm_video_probe() allocates the npcm_video structure with kzalloc_obj()
but never frees it on any probe error path or in npcm_video_remove(),
leaking the allocation on every failed probe and every normal unbind.
Additionally, when npcm_video_setup_video() fails, the reserved memory
association established by of_reserved_mem_device_init() in
npcm_video_init() is not released, leaking the rmem_assigned_device
entry on the global list.
Fix both by adding kfree(video) to all probe error paths and to
npcm_video_remove(), and adding the missing
of_reserved_mem_device_release() call when npcm_video_setup_video()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: Fix memory leak in error path of vdec_open
The vdec_open() function previously jumped directly to
err_m2m_release when vdec_init_ctrls() failed, skipping
release of the m2m context. This caused a resource leak.
Fix it by introducing a proper err_m2m_ctx_release label
that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before
releasing the m2m device.
This was identified via kmemleak:
unreferenced object 0xffff0000205d6878 (size 8):
comm "v4l_id", pid 5289, jiffies 4294938580
hex dump (first 8 bytes):
40 d2 49 18 00 00 ff ff @.I.....
backtrace (crc d3204599):
kmemleak_alloc+0xc8/0xf0
__kvmalloc_node_noprof+0x60c/0x850
v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev]
vdec_open+0x1f4/0x788 [meson_vdec]
v4l2_open+0x144/0x460 [videodev]
chrdev_open+0x1ac/0x500
do_dentry_open+0x3f0/0xfe8
vfs_open+0x68/0x320
do_open+0x2d8/0x9a8
path_openat+0x1d0/0x4f0
do_filp_open+0x190/0x380
do_sys_openat2+0xf8/0x1b0
__arm64_sys_openat+0x13c/0x1e8
invoke_syscall+0xdc/0x268
el0_svc_common.constprop.0+0x178/0x258
do_el0_svc+0x4c/0x70 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: fix memory leak on slave unregistration by removing synced VLANs
When an HSR master device is brought UP, it auto-adds VLAN 0 via
vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B).
If a slave device is later unregistered while HSR is active (e.g., during
netns cleanup or interface destruction), hsr_del_port() is called to
detach the slave port from the HSR master. However, hsr_del_port() currently
does not delete the VLAN IDs that were synced to the slave device by HSR.
As a result, the slave device retains a refcount on VID 0 (and any other
synced VLANs). When the slave device is destroyed, its vlan_info /
vlan_vid_info structure remains allocated, leading to a memory leak.
Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in
hsr_del_port() before unlinking slave A or slave B ports, matching the
propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid()
and the cleanup behavior in bonding and team drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers
CCS read/write buffers are freed during BO destruction. In some cases,
BOs may be destroyed after the device is unbound but while the DRM
structure remains valid, leading to NULL pointer dereferences when
accessing device resources.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 9376 Comm: xe_pat Not tainted 7.2.0-rc2+ #1 PREEMPT(lazy)
RIP: 0010:xe_sriov_vf_ccs_rw_update_bb_addr+0x4d/0xa0 [xe]
RSP: 0018:ffffcf304110b9c8 EFLAGS: 00010246
RAX: ffff8a85c38a0a00 RBX: 00000000810ef000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8a85c39c1888
RBP: ffffcf304110b9e8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a85c39c1888
R13: 0000000000000000 R14: ffff8a85c39b4f28 R15: ffff8a85c3885000
FS: 0000000000000000(0000) GS:ffff8a878b809000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010314a002 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_migrate_ccs_rw_copy_clear+0x98/0x120 [xe]
xe_sriov_vf_ccs_detach_bo+0x2c/0x60 [xe]
xe_ttm_bo_delete_mem_notify+0xc8/0xe0 [xe]
ttm_bo_cleanup_memtype_use+0x26/0x80 [ttm]
ttm_bo_release+0x29e/0x2d0 [ttm]
ttm_bo_fini+0x39/0x70 [ttm]
xe_gem_object_free+0x1f/0x30 [xe]
drm_gem_object_free+0x1d/0x40
ttm_bo_vm_close+0x5f/0x90 [ttm]
remove_vma+0x2c/0x70
tear_down_vmas+0x63/0xf0
exit_mmap+0x20d/0x3f0
__mmput+0x45/0x170
mmput+0x31/0x40
do_exit+0x2ba/0xac0
do_group_exit+0x2d/0xb0
__x64_sys_exit_group+0x18/0x20
x64_sys_call+0x14a0/0x2390
do_syscall_64+0xdd/0x640
? count_memcg_events+0xea/0x240
? handle_mm_fault+0x1ec/0x2f0
(cherry picked from commit 1ae415a6eefe5004954a1d352b1718faca8844ef) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix crash in reset link replay
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
