| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: The 'openssl dgst' command-line tool silently truncates input
data to 16MB when using one-shot signing algorithms and reports success instead
of an error.
Impact summary: A user signing or verifying files larger than 16MB with
one-shot algorithms (such as Ed25519, Ed448, or ML-DSA) may believe the entire
file is authenticated while trailing data beyond 16MB remains unauthenticated.
When the 'openssl dgst' command is used with algorithms that only support
one-shot signing (Ed25519, Ed448, ML-DSA-44, ML-DSA-65, ML-DSA-87), the input
is buffered with a 16MB limit. If the input exceeds this limit, the tool
silently truncates to the first 16MB and continues without signaling an error,
contrary to what the documentation states. This creates an integrity gap where
trailing bytes can be modified without detection if both signing and
verification are performed using the same affected codepath.
The issue affects only the command-line tool behavior. Verifiers that process
the full message using library APIs will reject the signature, so the risk
primarily affects workflows that both sign and verify with the affected
'openssl dgst' command. Streaming digest algorithms for 'openssl dgst' and
library users are unaffected.
The FIPS modules in 3.5 and 3.6 are not affected by this issue, as the
command-line tools are outside the OpenSSL FIPS module boundary.
OpenSSL 3.5 and 3.6 are vulnerable to this issue.
OpenSSL 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| Issue summary: A TLS 1.3 connection using certificate compression can be
forced to allocate a large buffer before decompression without checking
against the configured certificate size limit.
Impact summary: An attacker can cause per-connection memory allocations of
up to approximately 22 MiB and extra CPU work, potentially leading to
service degradation or resource exhaustion (Denial of Service).
In affected configurations, the peer-supplied uncompressed certificate
length from a CompressedCertificate message is used to grow a heap buffer
prior to decompression. This length is not bounded by the max_cert_list
setting, which otherwise constrains certificate message sizes. An attacker
can exploit this to cause large per-connection allocations followed by
handshake failure. No memory corruption or information disclosure occurs.
This issue only affects builds where TLS 1.3 certificate compression is
compiled in (i.e., not OPENSSL_NO_COMP_ALG) and at least one compression
algorithm (brotli, zlib, or zstd) is available, and where the compression
extension is negotiated. Both clients receiving a server CompressedCertificate
and servers in mutual TLS scenarios receiving a client CompressedCertificate
are affected. Servers that do not request client certificates are not
vulnerable to client-initiated attacks.
Users can mitigate this issue by setting SSL_OP_NO_RX_CERTIFICATE_COMPRESSION
to disable receiving compressed certificates.
The FIPS modules in 3.6, 3.5, 3.4 and 3.3 are not affected by this issue,
as the TLS implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4 and 3.3 are vulnerable to this issue.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Issue summary: Writing large, newline-free data into a BIO chain using the
line-buffering filter where the next BIO performs short writes can trigger
a heap-based out-of-bounds write.
Impact summary: This out-of-bounds write can cause memory corruption which
typically results in a crash, leading to Denial of Service for an application.
The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in
TLS/SSL data paths. In OpenSSL command-line applications, it is typically
only pushed onto stdout/stderr on VMS systems. Third-party applications that
explicitly use this filter with a BIO chain that can short-write and that
write large, newline-free data influenced by an attacker would be affected.
However, the circumstances where this could happen are unlikely to be under
attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated
data controlled by an attacker. For that reason the issue was assessed as
Low severity.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the BIO implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| SolarWinds Web Help Desk was found to be susceptible to an authentication bypass vulnerability that if exploited, would allow a malicious actor to execute actions and methods that should be protected by authentication. |
| ZwiiCMS versions prior to 13.7.00 contain a denial-of-service vulnerability in multiple administrative endpoints due to improper authorization checks combined with flawed resource state management. When an authenticated low-privilege user requests an administrative page, the application returns "404 Not Found" as expected, but incorrectly acquires and associates a temporary lock on the targeted resource with the attacker session prior to authorization. This lock prevents other users, including administrators, from accessing the affected functionality until the attacker navigates away or the session is terminated. |
| Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue. |
| SolarWinds Web Help Desk was found to be susceptible to an untrusted data deserialization vulnerability that could lead to remote code execution, which would allow an attacker to run commands on the host machine. This could be exploited without authentication. |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously
crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing
non-ASCII BMP code point can trigger a one byte write before the allocated
buffer.
Impact summary: The out-of-bounds write can cause a memory corruption
which can have various consequences including a Denial of Service.
The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12
BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes,
the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16
source byte count as the destination buffer capacity to UTF8_putc(). For BMP
code points above U+07FF, UTF-8 requires three bytes, but the forwarded
capacity can be just two bytes. UTF8_putc() then returns -1, and this negative
value is added to the output length without validation, causing the
length to become negative. The subsequent trailing NUL byte is then written
at a negative offset, causing write outside of heap allocated buffer.
The vulnerability is reachable via the public PKCS12_get_friendlyname() API
when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a
different code path that avoids this issue, PKCS12_get_friendlyname() directly
invokes the vulnerable function. Exploitation requires an attacker to provide
a malicious PKCS#12 file to be parsed by the application and the attacker
can just trigger a one zero byte write before the allocated buffer.
For that reason the issue was assessed as Low severity according to our
Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| A command injection vulnerability may be exploited after the admin's authentication in the cloud communication interface on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability.
This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID.
This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420. |
| Issue summary: A type confusion vulnerability exists in the TimeStamp Response
verification code where an ASN1_TYPE union member is accessed without first
validating the type, causing an invalid or NULL pointer dereference when
processing a malformed TimeStamp Response file.
Impact summary: An application calling TS_RESP_verify_response() with a
malformed TimeStamp Response can be caused to dereference an invalid or
NULL pointer when reading, resulting in a Denial of Service.
The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2()
access the signing cert attribute value without validating its type.
When the type is not V_ASN1_SEQUENCE, this results in accessing invalid memory
through the ASN1_TYPE union, causing a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
TimeStamp Response to an application that verifies timestamp responses. The
TimeStamp protocol (RFC 3161) is not widely used and the impact of the
exploit is just a Denial of Service. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the TimeStamp Response implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| An OS Command Injection vulnerability in TP-Link Archer BE230 v1.2(vpn modules) allows adjacent
authenticated
attacker
execute arbitrary code. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability.
This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID.This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420. |
| A command injection vulnerability may be exploited after the admin's authentication via the import of a crafted VPN client configuration file on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability.
This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID.
This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420. |
| Iskysoft Application Framework Service 2.4.3.241 contains an unquoted service path vulnerability that allows local users to potentially execute arbitrary code with elevated privileges. Attackers can exploit the unquoted path in the service configuration to inject malicious executables that would be run with the service's high-level system permissions. |
| Issue summary: Processing a malformed PKCS#12 file can trigger a NULL pointer
dereference in the PKCS12_item_decrypt_d2i_ex() function.
Impact summary: A NULL pointer dereference can trigger a crash which leads to
Denial of Service for an application processing PKCS#12 files.
The PKCS12_item_decrypt_d2i_ex() function does not check whether the oct
parameter is NULL before dereferencing it. When called from
PKCS12_unpack_p7encdata() with a malformed PKCS#12 file, this parameter can
be NULL, causing a crash. The vulnerability is limited to Denial of Service
and cannot be escalated to achieve code execution or memory disclosure.
Exploiting this issue requires an attacker to provide a malformed PKCS#12 file
to an application that processes it. For that reason the issue was assessed as
Low severity according to our Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| Vulnerability in the Oracle FLEXCUBE Universal Banking product of Oracle Financial Services Applications (component: Relationship Pricing). Supported versions that are affected are 14.0.0.0.0-14.8.0.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle FLEXCUBE Universal Banking. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle FLEXCUBE Universal Banking accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Improper access control in Mdecservice prior to SMR Apr-2025 Release 1 allows local attackers to access arbitrary files with system privilege. |
| Improper input validation in data related to network restrictions prior to SMR Jan-2026 Release 1 allows physical attackers to bypass Carrier Relock. |
| Out-of-bounds read in libimagecodec.quram.so prior to SMR Jan-2026 Release 1 allows remote attacker to access out-of-bounds memory. |
| It was found that the XPC service offered by the privileged helper of Native Access uses the PID of the connecting client to verify its code signature. This is considered insecure and can be exploited by PID reuse attacks. The connection handler function uses _xpc_connection_get_pid(arg2) as argument for the hasValidSignature function. This value can not be trusted since it is vulnerable to PID reuse attacks. |
