| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ACE size against SID sub-authorities
set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but
does not verify that the declared ACE size contains all sub-authorities
described by that field. An undersized ACE can therefore be copied
and later make the POSIX ACL deduplication walk inspect data beyond
the copied ACE boundary.
The existing initial bound check is also too small. It only ensures
that the ACE size field is accessible before set_ntacl_dacl() reads
sid.num_subauth farther into the input buffer.
Require enough input for the fixed SID header before accessing
num_subauth, reject ACEs smaller than that header, and skip ACEs
whose declared size cannot contain the complete SID. This makes the
validation consistent with the other ACE walk paths. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix recursive locking deadlock in audit_dupe_exe()
A deadlock occurs in the audit subsystem when duplicating
executable-related rules.
When a file is moved (e.g., via do_renameat2()), the VFS layer locks
the parent directory (I_MUTEX_PARENT), which synchronously triggers an
fsnotify_move event. If an existing executable audit rule matches the
file being moved, the audit subsystem catches this event and calls
audit_dupe_exe() to duplicate the watch and update the rule. Then,
audit_alloc_mark() would call kern_path_parent() to resolve the path,
leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock
already held by the task, resulting in the following recursive locking
deadlock:
============================================
WARNING: possible recursive locking detected
6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted
--------------------------------------------
mv/5099 is trying to acquire lock:
ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: __kern_path_locked+0x10a/0x2f0
but task is already holding lock:
ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: lock_two_directories+0x13f/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by mv/5099:
#0: ffff888112a9c440 (sb_writers#13)
at: do_renameat2+0x34c/0xbc0
#1: ffff888112a9c790 (&type->s_vfs_rename_key#3)
at: do_renameat2+0x415/0xbc0
#2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1)
at: lock_two_directories+0x13f/0x2b0
#3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5)
at: lock_two_directories+0x175/0x2b0
#4: ffffffffb3a1fb10 (&fsnotify_mark_srcu)
at: fsnotify+0x454/0x28a0
#5: ffffffffaf886230 (audit_filter_mutex)
at: audit_update_watch+0x36/0x11e0
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_deadlock_bug.cold+0xbd/0xca
validate_chain+0x83a/0xf00
__lock_acquire+0xcac/0x1d20
lock_acquire.part.0+0x11b/0x360
down_write_nested+0x9f/0x230
__kern_path_locked+0x10a/0x2f0
kern_path_locked+0x26/0x40
audit_alloc_mark+0xfb/0x4f0
audit_dupe_exe+0x6c/0xe0
audit_dupe_rule+0x6c2/0xc00
audit_update_watch+0x4cc/0x11e0
audit_watch_handle_event+0x12c/0x1b0
send_to_group+0x5d0/0x8b0
fsnotify+0x615/0x28a0
fsnotify_move+0x1d8/0x630
vfs_rename+0xdcd/0x1df0
do_renameat2+0x9d4/0xbc0
__x64_sys_renameat+0x192/0x260
do_syscall_64+0x92/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0491fe8c4e
Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff
c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48>
3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89
RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e
RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a
R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c
</TASK>
The aforementioned deadlock can be consistently reproduced by running
the script below:
audit-dupe-exe-deadlock.sh
--------------------------
#!/bin/bash
auditctl -D
mkdir -p /tmp/foo
touch /tmp/file
auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr
mv /tmp/file /tmp/foo/file
rm -Rf /tmp/foo
This patch fixes the issue by introducing struct audit_watch_ctx to pass
the fsnotify event context down to audit_alloc_mark(). By utilizing the
already-resolved directory inode provided by the event, we bypass the
kern_path_parent() path resol
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: stop hardware after post-start probe failures
wacom_parse_and_register() starts HID hardware before registering inputs
and initializing pad LEDs/remotes. Those later steps can fail, but their
error paths currently release Wacom resources without stopping the HID
hardware.
Route post-hid_hw_start() failures through hid_hw_stop() before
releasing driver resources.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
HCI_UART_SENDING bit in tx_state means write_work is pending and blocks
queueing it again. Currently this bit is not cleared when canceling the
work in hci_uart_close(), which blocks future writes when device is
reopened later if write_work was pending.
Fix by clearing HCI_UART_SENDING when canceling the work.
Also make clearing of tx_skb safe by using disable_work_sync +
enable_work instead of just cancel_work_sync. hci_uart_flush() purges
the proto tx queue so we can cancel the pending write_work there,
instead of doing it just in hci_uart_close(). Re-enable and possibly
requeue the work after queue flush. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix two unsafe bare decodes in decode_lockers()
decode_lockers() in cls_lock_client.c contains two bare decode operations
that allow a malicious or compromised OSD to trigger slab-out-of-bounds
reads:
1. ceph_decode_32(p) at the num_lockers field has no preceding bounds
check. ceph_start_decoding() accepts struct_len=0 as valid -- the
internal ceph_decode_need(p, end, 0, bad) always passes -- so when an
OSD sends struct_len=0, ceph_start_decoding() returns success with
p == end. The immediately following bare ceph_decode_32(p) then reads
4 bytes past the validated buffer boundary. The garbage value is
passed directly to kzalloc_objs() as the locker count.
The sibling function decode_watchers() in osd_client.c already uses
ceph_decode_32_safe() after its own ceph_start_decoding() call.
decode_lockers() was the only site using the bare variant.
2. ceph_decode_8(p) after the decode_locker() loop has no preceding
bounds check. If an OSD crafts num_lockers such that the loop
advances p exactly to end, the subsequent bare ceph_decode_8(p) reads
one byte past the validated buffer boundary. The result is passed
directly into *type, which is used as a lock type discriminator by
callers, giving an OSD-controlled one-byte OOB read with direct
influence over the lock type field.
Fix both by replacing bare operations with their safe variants:
ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers,
err_inval)
ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type,
err_free_lockers)
The goto targets differ intentionally:
err_inval: is a new label returning -EINVAL directly. It is used for
the pre-allocation failure path where *lockers is not yet allocated
and must not be passed to ceph_free_lockers().
err_free_lockers: is the existing label. It is used for the
post-allocation failure path where *lockers is allocated and must
be freed.
ret is set to -EINVAL before ceph_decode_8_safe() so that
err_free_lockers returns the correct error code on bounds violation.
Without this, err_free_lockers would return a stale ret value (0 from
the successful decode_locker() loop), silently swallowing the error.
-EINVAL is correct for both failure paths. The data received from the
OSD is structurally malformed. -ENOMEM would misrepresent the failure
class to callers and to stable@ backporters triaging error paths.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition).
[ idryomov: trim changelog, formatting ] |
| A vulnerability has been found in Dromara lamp-cloud up to 5.10.0. This affects an unknown part of the file DefGenProjectController.java of the component Code Generator. Such manipulation of the argument outputDir/parent/projectPrefix leads to path traversal. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Improper input validation in Samsung Plus TV prior to version 1.0.28.6 allows remote attackers to access sensitive information. |
| Improper input validation in Samsung Android USB Driver for Windows prior to version 1.9.5.0 allows local attacker to access out-of-bounds memory. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm_dev_release() uses plain kfree() to free chip->auth, which contains
sensitive cryptographic material including HMAC session keys, nonces,
and passphrase data (struct tpm2_auth).
Every other code path that frees this structure uses kfree_sensitive()
to zero the memory before releasing it: both tpm2_end_auth_session()
and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path
is the only one that does not, leaving key material in freed slab
memory until it is eventually overwritten.
Use kfree_sensitive() for consistency with the rest of the driver and
to ensure session keys are scrubbed during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: clear waitid info before copying it to userspace
IORING_OP_WAITID stores its result fields in struct io_waitid::info and
later copies them to userspace siginfo. The prep path initializes the
request arguments, but it does not initialize info itself.
If the wait operation completes without reporting a child event, the common
wait code can return without writing wo_info. In that case io_waitid_finish()
still copies iw->info to userspace, exposing stale bytes from the reused
io_kiocb command storage.
Clear the result storage during prep so the io_uring path matches the
regular waitid syscall, which uses a zero-initialized struct waitid_info. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: fix access mode flags being ORed instead of replaced
Since commit 1f3e4142c0eb ("9p: convert to the new mount API"),
v9fs_apply_options() applies parsed mount flags with |= onto flags
already set by v9fs_session_init(). For 9P2000.L, session_init sets
V9FS_ACCESS_CLIENT as the default, so when the user mounts with
"access=user", both bits end up set. Access mode checks compare
against exact values, so having both bits set matches neither mode.
This causes v9fs_fid_lookup() to fall through to the default switch
case, using INVALID_UID (nobody/65534) instead of current_fsuid()
for all fid lookups. Root is then unable to chown or perform other
privileged operations.
Fix by clearing the access mask before applying the user's choice. |
| Vulnerability in the Oracle WebCenter Sites product of Oracle Fusion Middleware (component: WebCenter Sites). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle WebCenter Sites. Successful attacks of this vulnerability can result in takeover of Oracle WebCenter Sites. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user who is authorized to manage maintenance windows could submit a specially crafted, malformed payload that causes the Kibana process to consume excessive resources. Kibana becomes unresponsive for all users and does not recover without manual intervention. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A vulnerability was detected in Model Context Protocol mcp-rdf-explorer 1.0.0. Affected is the function explore_url of the file src/mcp-rdf-explorer/server.py of the component MCP Server. Performing a manipulation of the argument url results in server-side request forgery. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Vulnerability in the Oracle Enterprise Manager Base Platform product of Oracle Enterprise Manager (component: Metadata Plugin). Supported versions that are affected are 13.5 and 24.1. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle Enterprise Manager Base Platform. While the vulnerability is in Oracle Enterprise Manager Base Platform, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Enterprise Manager Base Platform. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the Oracle Enterprise Manager Base Platform product of Oracle Enterprise Manager (component: Install). Supported versions that are affected are 13.5 and 24.1. Easily exploitable vulnerability allows high privileged attacker with network access via HTTPS to compromise Oracle Enterprise Manager Base Platform. While the vulnerability is in Oracle Enterprise Manager Base Platform, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Enterprise Manager Base Platform accessible data as well as unauthorized read access to a subset of Oracle Enterprise Manager Base Platform accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Enterprise Manager Base Platform. CVSS 3.1 Base Score 9.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:L/I:H/A:H). |
| Vulnerability in the Oracle iSupport product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle iSupport. While the vulnerability is in Oracle iSupport, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle iSupport. CVSS 3.1 Base Score 9.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
