| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in RISC-V PicoRV32 commit 87c89a. A mismatch in the PCPI INSN and memory address can lead to unexpected behavior. |
| CVE-2026-33444 is a memory management
vulnerability in Secure Access servers prior to 14.55. Attackers with intimate
knowledge of and total control over the tunnel protocol can create a
non-persistent DoS against the server. |
| CVE-2026-55398
is a memory management vulnerability in Secure Access clients and servers prior
to 14.55. Attackers with intimate knowledge of and total control over the
tunnel protocol can create a non-persistent DoS against the server. |
| Juggle through 1.6.0 contains a remote code execution vulnerability that allows unauthenticated remote attackers to execute arbitrary OS commands by connecting to the exposed H2 database web console using default shipped credentials. Attackers can access the unprotected /h2-console endpoint, authenticate with default credentials, and leverage the H2 CREATE ALIAS Runtime.exec() technique to execute arbitrary commands, resulting in root-level code execution when running the stock Docker image. |
| MathLive provides web components for math display and input. Prior to 0.110.0, MathLive fails to escape text-mode content in \text{} and \mbox{} commands in Box.toMarkup at src/core/box.ts, in xmlEscape, scanText, and text-mode output in src/formats/atom-to-math-ml.ts, and through convertLatexToMarkup, convertLatexToMathMl, <math-span>, <math-div>, and the default identity MathfieldElement.createHTML, allowing malicious input to run arbitrary JavaScript when rendered. This issue is fixed in version 0.110.0. |
| A flaw was found in OpenStack Keystone. A remote attacker could exploit this vulnerability by sending a large HTTP request, specifically by providing a long tenant name when requesting a token. This could lead to a denial of service, consuming excessive CPU and memory resources on the affected system. |
| CentreStack before 17.4 contains a session variable injection vulnerability that allows unauthenticated attackers to inject arbitrary session variables by embedding newline and tab characters into a crafted AccountName parameter posted to the SelectProvider.aspx endpoint. Attackers can exploit the lack of input sanitization in the custom session serialization format to inject a resellerid session variable, bypassing the IsValidRSession authentication check and gaining unauthorized access to management pages. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix the smbd_response slab to allow usercopy
The handling of received data in the smbdirect client code involves using
copy_to_iter() to copy data from the smbd_reponse struct's packet trailer
to a folioq buffer provided by netfslib that encapsulates a chunk of
pagecache.
If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks
then performed in copy_to_iter() oopsing with something like the following:
CIFS: Attempting to mount //172.31.9.1/test
CIFS: VFS: RDMA transport established
usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
...
RIP: 0010:usercopy_abort+0x6c/0x80
...
Call Trace:
<TASK>
__check_heap_object+0xe3/0x120
__check_object_size+0x4dc/0x6d0
smbd_recv+0x77f/0xfe0 [cifs]
cifs_readv_from_socket+0x276/0x8f0 [cifs]
cifs_read_from_socket+0xcd/0x120 [cifs]
cifs_demultiplex_thread+0x7e9/0x2d50 [cifs]
kthread+0x396/0x830
ret_from_fork+0x2b8/0x3b0
ret_from_fork_asm+0x1a/0x30
The problem is that the smbd_response slab's packet field isn't marked as
being permitted for usercopy.
Fix this by passing parameters to kmem_slab_create() to indicate that
copy_to_iter() is permitted from the packet region of the smbd_response
slab objects, less the header space. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en] |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme_tcp_recv_pdu() doesn't check the validity of the header length.
When header digests are enabled, a target might send a packet with an
invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst()
to access memory outside the allocated area and cause memory corruptions
by overwriting it with the calculated digest.
Fix this by rejecting packets with an unexpected header length. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-sff: Ensure that we cannot write outside the allocated buffer
reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len
set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to
ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to
write outside the allocated buffer, overwriting random memory.
While a ATA device is supposed to abort a ATA_NOP command, there does seem
to be a bug either in libata-sff or QEMU, where either this status is not
set, or the status is cleared before read by ata_sff_hsm_move().
Anyway, that is most likely a separate bug.
Looking at __atapi_pio_bytes(), it already has a safety check to ensure
that __atapi_pio_bytes() cannot write outside the allocated buffer.
Add a similar check to ata_pio_sector(), such that also ata_pio_sector()
cannot write outside the allocated buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac-tegra: Read iommu stream id from device tree
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be
written to the MGBE_WRAP_AXI_ASID0_CTRL register.
The current driver is hard coded to use MGBE0's SID for all controllers.
This causes softirq time outs and kernel panics when using controllers
other than MGBE0.
Example dmesg errors when an ethernet cable is connected to MGBE1:
[ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms
[ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter.
[ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171)
[ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features
[ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock
[ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode
[ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337
[ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8)
[ 181.921878] Sending NMI from CPU 4 to CPUs 7:
[ 181.921886] NMI backtrace for cpu 7
[ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6
[ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024
[ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 181.922847] pc : handle_softirqs+0x98/0x368
[ 181.922978] lr : __do_softirq+0x18/0x20
[ 181.923095] sp : ffff80008003bf50
[ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000
[ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0
[ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70
[ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000
[ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000
[ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d
[ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160
[ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74
[ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1
[ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000
[ 181.967591] Call trace:
[ 181.970043] handle_softirqs+0x98/0x368 (P)
[ 181.974240] __do_softirq+0x18/0x20
[ 181.977743] ____do_softirq+0x14/0x28
[ 181.981415] call_on_irq_stack+0x24/0x30
[ 181.985180] do_softirq_own_stack+0x20/0x30
[ 181.989379] __irq_exit_rcu+0x114/0x140
[ 181.993142] irq_exit_rcu+0x14/0x28
[ 181.996816] el1_interrupt+0x44/0xb8
[ 182.000316] el1h_64_irq_handler+0x14/0x20
[ 182.004343] el1h_64_irq+0x80/0x88
[ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P)
[ 182.012305] cpuidle_enter+0x3c/0x58
[ 182.015980] cpuidle_idle_call+0x128/0x1c0
[ 182.020005] do_idle+0xe0/0xf0
[ 182.023155] cpu_startup_entry+0x3c/0x48
[ 182.026917] secondary_start_kernel+0xdc/0x120
[ 182.031379] __secondary_switched+0x74/0x78
[ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/.
[ 212.985935] rcu: blocking rcu_node structures (internal RCU debug):
[ 212.992758] Sending NMI from CPU 0 to CPUs 7:
[ 212.998539] NMI backtrace for cpu 7
[ 213.004304] CPU: 7 UID: 0 PI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may result in the disclosure of process memory. |
| diff‑so‑fancy does not properly sanitize non‑SGR terminal control sequences before outputting diff data. The application only strips ANSI SGR sequences while allowing other control characters, including carriage return (\r) and escape sequences (e.g., OSC, CSI), to pass through unsanitized.
An attacker can embed malicious control sequences in filenames, diff metadata, or file content that are rendered directly in the terminal during diff viewing. This can lead to output manipulation, including filename spoofing, terminal screen clearing, and clipboard injection via supported escape sequences.
Successful exploitation may mislead users during code review, alter terminal state, or result in unintended command execution through clipboard hijacking.
This issue has been fixed in the commit 9c81294 |
| A weakness has been identified in radareorg radare2 up to 6.1.6. Impacted is the function r_core_seek_arch_bits of the file libr/core/disasm.c of the component regprofile Handler. Executing a manipulation can lead to use after free. The attack requires local access. The exploit has been made available to the public and could be used for attacks. This patch is called 8b25c773785d85cb0103410a0905089d286921c2. It is advisable to implement a patch to correct this issue. |
| A use-after-free vulnerability in the Linux Kernel traffic control index filter (tcindex) can be exploited to achieve local privilege escalation. The tcindex_delete function which does not properly deactivate filters in case of a perfect hashes while deleting the underlying structure which can later lead to double freeing the structure. A local attacker user can use this vulnerability to elevate its privileges to root.
We recommend upgrading past commit 8c710f75256bb3cf05ac7b1672c82b92c43f3d28 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/ . |
| Rouille 0.4.0 through 3.6.2 contains an HTTP response splitting vulnerability that allows remote attackers to inject arbitrary response headers by embedding carriage return (0x0D) or line feed (0x0A) bytes into attacker-controlled input. Attackers can exploit percent-decoded query parameters reflected into response headers or inject bare LF characters into Cookie header values that are interpolated directly into Set-Cookie response headers, enabling cache poisoning, session fixation, and security header override attacks such as bypassing CSP or CORS policies. |
| Improper exposure of the MCP server in alibabacloud-rds-openapi-mcp-server allows remote attackers to invoke exposed MCP tools via network access to an MCP endpoint listening on all network interfaces by default. |
| Joomla Extension - joomdle.com - Insecure default configuration allows read/write user account access in Joomdle < 3.1.1 - The default configuration of the extension allowed read access and password reset of CMS accounts. |
