| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Avoid iteration of dying tasks with zero refcount
The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from
cgroup_task_release() to cgroup_task_free()") extended the lifetime of
tasks on the dying_tasks list.
The iterators have provision to go through dying_tasks because of
dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however,
it was expected that such tasks can obtain a new reference (that is
possible before cgroup_task_release()/put_task_struct_rcu_user()).
The tasks after cgroup_task_release() and before cgroup_task_free()
are subject to race when they may or may not have ->usage count > 0.
The race window is between css_task_iter_next() invocations
when css_set_lock is released and we may arrive at a new ->task_pos.
The iterator should not attempt to resurrect tasks whose ->usage count
dropped to zero. (When that happens, __put_task_struct_rcu_cb() is
already imminent and the returned task_struct would could be used
after free.)
As for the fix, we cannot simply check the signal->live count of a task
on the dying list because that won't distinguish regular zombies waiting
to be reaped from RCU remnant tasks that are going to be free'd.
Therefore add an extra check to rule out ->usage==0 tasks from any
iteration.
The repeat: loop in css_task_iter_advance() doesn't consider ->usage
count, so add a new loop to css_task_iter_next() to skip de-used tasks
on the dying_list.
Rough illustration of the possible race
R (reader of cgroup.procs) T (thread) L (group leader)
--------------------------------- -------------------------------- --------------------------------
L exits, signal->live > 0
cgroup_task_dead(L)
css_set_skip_task_iters() // skips only cset->tasks
list_add_tail(&L->cg_list, &cset->dying_tasks)
css_task_iter_next()
take css_set_lock
css_task_iter_advance()
leader && signal->live != 0
=> it->task_pos = &L->cg_list
release css_set_lock
T exits
--signal->live == 0
cgroup_task_dead(T) // css_set_lock
release_task(T)
cgroup_task_release(T)
release_task(L) // zap_leader
cgroup_task_release(L)
put_task_struct_rcu_user(L)
...RCU...
put_task_struct(L)
L->usage = 0
/* L still on dying_tasks */
...RCU...
__put_task_struct(L)
css_task_iter_next() // another iteration
take css_set_lock
it->task_pos = &L->cg_list
get_task_struct(L)
=> addition on 0
drop css_set_lock
cgroup_task_free(L)
css_set_skip_task_iters() // dying skip comes too late
free_task(L)
cgroup_procs_show()
task_pid_vnr(L) |
| Use after free in Navigation in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| Use after free in Track in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: serialize state GC with device state flush
The deferred-device pass in xfrm_dev_state_flush() finds states under
xfrm_state_dev_gc_lock, but drops the lock before calling
xfrm_dev_state_free() because the driver callback may sleep. The device
GC list does not hold an xfrm_state reference, so the state GC worker can
destroy the same state concurrently.
The race can proceed as follows:
CPU 0 CPU 1
find x on the device GC list
drop xfrm_state_dev_gc_lock
read x->xso.dev
xfrm_state_gc_destroy(x)
xfrm_dev_state_free(x)
xfrm_state_free(x)
continue xfrm_dev_state_free(x)
Both paths can invoke the driver callback and drop the device reference.
CPU 0 can also access the xfrm_state after CPU 1 has freed it.
KASAN reported:
BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0
Read of size 8 at addr ffff88810bbaa960 by task poc/102
Call Trace:
xfrm_dev_state_free+0x24c/0x2a0
xfrm_dev_state_flush+0x353/0x400
xfrm_dev_event+0x26d/0x3a0
notifier_call_chain+0xc0/0x280
__dev_notify_flags+0x169/0x250
netif_change_flags+0xe7/0x160
dev_change_flags+0x96/0x220
devinet_ioctl+0x7f4/0x1880
Allocated by task 87:
xfrm_state_alloc+0x1e/0x5c0
xfrm_add_sa+0xe7f/0x5820
xfrm_user_rcv_msg+0x4f3/0x940
Freed by task 57:
kmem_cache_free+0xcb/0x3d0
xfrm_state_gc_task+0x4a8/0x650
process_one_work+0x63a/0x1070
Serialize xfrm_state destruction against the deferred-device pass with a
mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain
the existing callback and device-reference release ordering. |
| In BluetoothCccHandlerCallbackImpl of bluetooth_ccc.cc, there is a possible use-after-free due to a logic error in the code. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Use after free in V8 in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown
In drop_monitor teardown paths (net_dm_trace_off_set(),
net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set()
and net_dm_hw_monitor_start()), per-CPU timers are stopped using
timer_delete_sync() followed by cancel_work_sync().
However, there is a circular dependency between send_timer and
dm_alert_work:
1) sched_send_work() (timer callback) schedules dm_alert_work.
2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data()
or net_dm_hw_reset_per_cpu_data().
3) If memory allocation fails under memory pressure in the reset
function, it re-arms the timer via mod_timer(&data->send_timer, ...).
If dm_alert_work is running concurrently while timer_delete_sync()
executes on another CPU, an allocation failure in the worker will
re-arm the timer after timer_delete_sync() has already returned.
Once cancel_work_sync() completes and module_put() is called, the timer
remains active in the timer wheel. If the module is then unloaded, the
timer will fire and execute sched_send_work() in freed memory,
triggering a kernel panic / use-after-free.
Switch from timer_delete_sync() to timer_shutdown_sync(). This guarantees
that any in-flight timer handler has finished and prevents subsequent
re-arming attempts from running workers from succeeding. When monitoring
is restarted later, timer_setup() is invoked, which cleanly
re-initializes the timer. |
| Use after free in WebRTC in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub
vectors with an hvc, but never passes the arguments. x0 is not set to
HVC_SET_VECTORS and x1 is not set to the vector address, so the stub
dispatch falls through and returns without writing vbar_el2. EL2 is
left pointing at the trans_pgd copy of the vectors, a page that
swsusp_free() releases right after resume.
Set the arguments up the same way __hyp_set_vectors() does.
Without this fix, Vladimir was able to trigger a hang when resuming from
hibernation with CONFIG_PAGE_POISONING=y and page_poison=on. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix potential UAF after asynchronous card release
Usually a sound driver releases the resources assigned to the card via
snd_card_free(), and it synchronizes with the whole release procedure.
However, when the card is released asynchronously via
snd_card_free_when_closed() like USB-audio driver, the situation is
slightly different; although the snd_card_disconnect() call at the
disconnection guarantees that any newer accesses will be gated, the
in-flight tasks might be still accessing to the underlying card->dev
device even after the disconnection, which would cause a
use-after-free in the end, as reported by fuzzers.
For addressing the bug above, this patch takes the refcount of
card->dev at initialization of the card object, and releases at its
destructor. This assures the availability of the card->dev in its
whole lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the LED state when ifup fails
When the first interface comes up, the radio LED is turned on. This can
start the TPT trigger timer, which continues running.
But if bringing up the interface fails then the timer keeps running and
won't be stopped by anything, eventually it can be freed:
ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145
WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0
debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129
kfree+0x436/0x670 mm/slub.c:6818
ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210
ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706
rt2x00lib_remove_dev+0x55b/0x670
Undo the LED state in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: wait for RCU readers before releasing dma_device
dma_issue_pending_all() walks the dma_device_list with
list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release()
unlinks the device with list_del_rcu() and then calls
device->device_release() (which in many drivers, such as plx_dma.c,
directly calls kfree()).
Because there is no grace period between unlinking the device and
freeing it, concurrent RCU readers in dma_issue_pending_all() can
access the device after it has been freed.
The lockless walk originally relied on clients holding a dmaengine
reference to pin the provider module, and therefore the device, for as
long as they might traverse the list. Commit 8ad342a86359 ("dmaengine:
Add reference counting to dma_device struct") decoupled the dma_device
lifetime from the module reference, so the device can now be released
while a reader is still walking the list.
Add synchronize_rcu() before the device is freed, so RCU readers are
guaranteed to have finished. Keep it unconditional: providers that do
not implement device_release() free the device themselves once
dma_async_device_unregister() returns. This call will delay for a grace
period with dma_list_mutex held, which is safe and only teardown path is
delayed. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.
dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:
slab-use-after-free in dma_chan_put+0x3e6/0x4c0
Read of size 8 by task insmod/6319
Freed by task 6319:
kfree+0x225/0x470
dma_chan_put+0x395/0x4c0
dmaengine_put+0xf8/0x160
Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device. |
| A flaw was found in OpenSSH. A malicious SSH server can exploit a double free vulnerability in the Diffie-Hellman Group Exchange (DH-GEX) client path. This occurs during FIPS (Federal Information Processing Standards) mode known-group validation when the client processes attacker-controlled DH-GEX group parameters. Successful exploitation leads to client-side process termination, resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix race between rawmidi and disconnect
Although we tried to fix the potential UAF issues at USB disconnect on
bcd2000 driver, there is still an overlooked case -- namely, when a
rawmidi trigger callback has been already running at USB disconnect
handling, the in-flight function (e.g. bcd2000_midi_send()) could
still access the URB, because the previous URB NULL-check & clearance
was considered only for the URB complete callbacks, but not about the
parallel rawmidi operations.
For addressing the race, this patch introduced a new spinlock that
covers each rawmidi operation as well as the rawmidi handling in the
complete callback. The URB is cleared with the lock, so it guarantees
that the pending rawmidi task already finished or a NULL check is
effective. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().
tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for
TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around
sk->sk_forward_alloc").
However, there is still a small race window between tcp_v6_rcv()
and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN
to TCP_CLOSE, causing skb_clone_and_charge_r() to be called
locklessly and resulting in the splat below. [0]
Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well.
This is fine for non-listeners because tcp_rcv_state_process()
drops skb for TCP_CLOSE and opt_skb was freed immediately anyway.
[0]:
sk->sk_forward_alloc
WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28
Modules linked in:
CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162
Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff
RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41
RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005
RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000
R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000
R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0
Call Trace:
<TASK>
__sk_destruct+0x82/0xae0 net/core/sock.c:2356
rcu_do_batch kernel/rcu/tree.c:2645 [inline]
rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622
run_ksoftirqd kernel/softirq.c:1076 [inline]
run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068
smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160
kthread+0x396/0x4a0 kernel/kthread.c:436
ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| Vim is an open source, command line text editor. From 9.2.0511 until 9.2.0844, json_decode_item() in src/json.c can retain a stale pointer after json_decode_string() invokes channel_fill() to refill and free the current buffer, causing the error path to read freed memory instead of reader->js_buf + reader->js_used when an invalid JSON string spans buffers. This issue is fixed in version 9.2.0844. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: reset device before deleting virtqueues
virtsnd_remove() and virtsnd_freeze() delete the virtqueues before
resetting the device. del_vqs() frees the vring backing, but does not
provide a generic device quiesce operation. In particular, modern
virtio-pci keeps enabled queues active until the device is reset.
Reset the device before deleting the virtqueues so it can no longer
access the vring memory when that memory is released. This also covers
probe failures after DRIVER_OK, which unwind through virtsnd_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix device kref underflow in dma_chan_put()
dma_chan_get() takes chan->device->ref only on the slow path:
/* no kref on fast path */
if (chan->client_count) {
__module_get(owner);
chan->client_count++;
return 0;
}
if (!try_module_get(owner))
return -ENODEV;
if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero()
dma_chan_put() drops the ref unconditionally, so every fast-path
get/put pair drops one extra device reference.
The bug fires when two conditions hold together: a non-private
provider has a persistent client holding chan->client_count > 0
and another client cycles dmaengine_get()/dmaengine_put().
When the kref hits zero, the subsequent dma_find_channel() returns
NULL even though the provider module is still loaded.
Fix this by dropping device->ref only on the last put, matching the
single slow-path get. |
