| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all.
GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it.
The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash.
The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines. |
| ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt->buffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet's interface is the Ethernet interface.
A packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards.
Because net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes — 18 with VLAN — of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer's payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt->buffer) is large enough and otherwise falls back to a separate header fragment. |
| A segment fault (SEGV) flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFReadRGBATileExt() API. This flaw allows a remote attacker to cause a heap-buffer overflow, leading to a denial of service. |
| FreeRDP before 3.32.0 contains a heap buffer overflow vulnerability in persistent_cache_read_entry_v2 that allows local attackers to corrupt heap memory via integer wraparound in bitmap size calculation. Attackers can craft a persistent cache v2 file with oversized width and height values that causes mismatched entry size accounting and fixed 16 KiB reads, leading to crashes or code execution when loaded. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory. |
| PostgreSQL Anonymizer's range-based dummy functions dont constraint the range size. This vulnerability can be exploited to exhaust the memory of a backend and OOM-kill it (when ovecommit is on), which results in a cluster-wide crash recovery. The problem is resolved in PostgreSQL Anonymizer 3.3.0 and later versions. |
| PostgreSQL Anonymizer's `anon.image_blur()` function doesn't check the declared dimension of the provided image, allowing an attacker to provide a small image with enormous declared dimensions. This vulnerability can be exploited to exhaust the memory of a backend and OOM-kill it (when ovecommit is on), which results in a cluster-wide crash recovery. The problem is resolved in PostgreSQL Anonymizer 3.3.0 and later versions. |
| A flaw has been found in Fusion Creators Studio SCP Containment Breach Multiplayer up to 1.295. This issue affects the function BlitzBanks of the component Skynet++ Virtual Machine. Executing a manipulation can lead to out-of-bounds write. The attack can be executed remotely. The exploit has been published and may be used. Upgrading to version 1.3R is capable of addressing this issue. It is recommended to upgrade the affected component. |
| A buffer overflow vulnerability in the Brotli decoder (c/dec/decode.c) in Google Brotli versions 1.0.3 through 1.2.0 on all platforms allows a remote unauthenticated attacker to corrupt adjacent decoder state memory, disclose sensitive memory contents, cause a denial of service, or potentially execute arbitrary code using a crafted Brotli-compressed stream.
Users need to update any Brotli libraries or binaries between 1.0.3 through 1.2.0 to the latest available version: 1.0.10 or 1.1.1 or 1.2.1. |
| FOG is a free open-source cloning/imaging/rescue suite/inventory management system. Prior to 1.5.10.2253 and 1.6.0-RC-1, an authenticated API-enabled user with uType=1 who possesses both the user's API token and the global FOG API token can use PUT /fog/storagenode/{id}/edit to modify Storage Node user, pass, and ftppath fields because the API validates the credentials but does not enforce an administrator-only role. With storage replication enabled and a usable Storage Node, FOGImageReplicator interpolates those fields into an lftp command executed through proc_open() by the root-running service, allowing the low-privileged user to execute commands as root. This issue is fixed in versions 1.5.10.2253 and 1.6.0-RC-1. |
| Asterisk is an open source private branch exchange and telephony toolkit. In affected deployments, an authenticated attacker may cause a `T.140 RED` out-of-bounds write during `generation accumulation` using carefully crafted packets, potentially allowing remote code execution or causing Asterisk to crash. The `chan_sip` channel driver must be installed and configured, and its `textsupport` option must be enabled; `textsupport` defaults to no. `The chan_sip driver was deprecated in Asterisk 20 and completely removed in all later versions.` Repository comparisons verify patch containment in Asterisk 20.20.1, 21.12.3, 22.10.1 and 23.4.1, and Certified Asterisk 20.7-cert11 and 22.8-cert3. The affected release-track scope remains unresolved: structured metadata includes later release tracks even though the advisory says the required `chan_sip` driver was removed there. |
| Internally found bugs present in Firefox ESR 115.38, Firefox ESR 140.13, Firefox ESR 153.0 and Firefox 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Internally found bugs present in Firefox ESR 140.13, Firefox ESR 153.0 and Firefox 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Information disclosure due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Out-of-bounds write in Windows DHCP Server allows an unauthorized attacker to execute code over a network. |
| EDK2 contains a vulnerability in BIOS where a user may cause “Out-of-bounds
Write”, Classic
Buffer Overflow, and “Incorrect Calculation of Buffer Size” by remote access. Successful exploitation of this vulnerability
can lead to arbitrary
code execution. It could also impact
Confidentiality,
Integrity,
and Availability. |
| Pillow is a Python imaging library. From 8.1.0 until 13.0.0, Pillow can allocate an APNG disposal background at the full canvas size before applying the decompression-bomb check. A crafted APNG with a small first frame, a very large declared canvas, and background disposal or first-frame OP_PREVIOUS reaches PngImageFile._seek while Image.open() positions frame zero. The full-canvas allocation occurs inside Image.open() without requiring pixel loading or frame iteration. This can exhaust memory and deny service. This issue is fixed in version 13.0.0. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to command execution. |
| Vyper from 0.1.0b4 before 0.3.0 contains a memory corruption vulnerability caused by an incorrect stack tip pointer when internal function calls are performed inside arrays. Contracts placing internal calls in nested array elements, external call arguments, struct literals, or raw_log topics can have memory corrupted, producing incorrect contract behavior. |
