| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path
If a shared IRQ is used by the driver due to platform limitation, then the
IRQ affinity hint is set right after the allocation of IRQ vectors in
ath12k_pci_msi_alloc(). This does no harm unless one of the functions
requesting the IRQ fails and attempt to free the IRQ.
This may end up with a warning from the IRQ core that is expecting the
affinity hint to be cleared before freeing the IRQ:
kernel/irq/manage.c:
/* make sure affinity_hint is cleaned up */
if (WARN_ON_ONCE(desc->affinity_hint))
desc->affinity_hint = NULL;
So to fix this issue, clear the IRQ affinity hint before calling
ath12k_pci_free_irq() in the error path. The affinity will be cleared once
again further down the error path due to code organization, but that does
no harm. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Harden uretprobe syscall trampoline check
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that. |
| A vulnerability was determined in LearnHouse up to 98dfad76aad70711a8113f6c1fdabfccf10509ca. The impacted element is an unknown function of the file /api/v1/assignments/{assignment_id}/tasks/{task_id}/sub_file of the component Student Assignment Submission Handler. This manipulation causes improper control of resource identifiers. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors
misc_minor_alloc was allocating id using ida for minor only in case of
MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids
using ida_free causing a mismatch and following warn:
> > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f
> > ida_free called for id=127 which is not allocated.
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
...
> > [<60941eb4>] ida_free+0x3e0/0x41f
> > [<605ac993>] misc_minor_free+0x3e/0xbc
> > [<605acb82>] misc_deregister+0x171/0x1b3
misc_minor_alloc is changed to allocate id from ida for all minors
falling in the range of dynamic/ misc dynamic minors |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix peer devlink set for SF representor devlink port
The cited patch change register devlink flow, and neglect to reflect
the changes for peer devlink set logic. Peer devlink set is
triggering a call trace if done after devl_register.[1]
Hence, align peer devlink set logic with register devlink flow.
[1]
WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180
CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core]
RIP: 0010:devlink_rel_nested_in_add+0x177/0x180
Call Trace:
<TASK>
? __warn+0x78/0x120
? devlink_rel_nested_in_add+0x177/0x180
? report_bug+0x16d/0x180
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? devlink_port_init+0x30/0x30
? devlink_port_type_clear+0x50/0x50
? devlink_rel_nested_in_add+0x177/0x180
? devlink_rel_nested_in_add+0xdd/0x180
mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core]
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core]
auxiliary_bus_probe+0x38/0x80
? driver_sysfs_add+0x51/0x80
really_probe+0xc5/0x3a0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x64f/0x860
__auxiliary_device_add+0x3b/0xa0
mlx5_sf_dev_add+0x139/0x330 [mlx5_core]
mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core]
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core]
process_one_work+0x13f/0x2e0
worker_thread+0x2bd/0x3c0
? rescuer_thread+0x410/0x410
kthread+0xc4/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
During the update procedure, when overwrite element in a pre-allocated
htab, the freeing of old_element is protected by the bucket lock. The
reason why the bucket lock is necessary is that the old_element has
already been stashed in htab->extra_elems after alloc_htab_elem()
returns. If freeing the old_element after the bucket lock is unlocked,
the stashed element may be reused by concurrent update procedure and the
freeing of old_element will run concurrently with the reuse of the
old_element. However, the invocation of check_and_free_fields() may
acquire a spin-lock which violates the lockdep rule because its caller
has already held a raw-spin-lock (bucket lock). The following warning
will be reported when such race happens:
BUG: scheduling while atomic: test_progs/676/0x00000003
3 locks held by test_progs/676:
#0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830
#1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500
#2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0
Modules linked in: bpf_testmod(O)
Preemption disabled at:
[<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500
CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11
Tainted: [W]=WARN, [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
__schedule_bug+0x120/0x170
__schedule+0x300c/0x4800
schedule_rtlock+0x37/0x60
rtlock_slowlock_locked+0x6d9/0x54c0
rt_spin_lock+0x168/0x230
hrtimer_cancel_wait_running+0xe9/0x1b0
hrtimer_cancel+0x24/0x30
bpf_timer_delete_work+0x1d/0x40
bpf_timer_cancel_and_free+0x5e/0x80
bpf_obj_free_fields+0x262/0x4a0
check_and_free_fields+0x1d0/0x280
htab_map_update_elem+0x7fc/0x1500
bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43
bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e
bpf_prog_test_run_syscall+0x322/0x830
__sys_bpf+0x135d/0x3ca0
__x64_sys_bpf+0x75/0xb0
x64_sys_call+0x1b5/0xa10
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
</TASK>
It seems feasible to break the reuse and refill of per-cpu extra_elems
into two independent parts: reuse the per-cpu extra_elems with bucket
lock being held and refill the old_element as per-cpu extra_elems after
the bucket lock is unlocked. However, it will make the concurrent
overwrite procedures on the same CPU return unexpected -E2BIG error when
the map is full.
Therefore, the patch fixes the lock problem by breaking the cancelling
of bpf_timer into two steps for PREEMPT_RT:
1) use hrtimer_try_to_cancel() and check its return value
2) if the timer is running, use hrtimer_cancel() through a kworker to
cancel it again
Considering that the current implementation of hrtimer_cancel() will try
to acquire a being held softirq_expiry_lock when the current timer is
running, these steps above are reasonable. However, it also has
downside. When the timer is running, the cancelling of the timer is
delayed when releasing the last map uref. The delay is also fixable
(e.g., break the cancelling of bpf timer into two parts: one part in
locked scope, another one in unlocked scope), it can be revised later if
necessary.
It is a bit hard to decide the right fix tag. One reason is that the
problem depends on PREEMPT_RT which is enabled in v6.12. Considering the
softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced
in v5.15, the bpf_timer commit is used in the fixes tag and an extra
depends-on tag is added to state the dependency on PREEMPT_RT.
Depends-on: v6.12+ with PREEMPT_RT enabled |
| In the Linux kernel, the following vulnerability has been resolved:
amdkfd: properly free gang_ctx_bo when failed to init user queue
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix implicit ODP hang on parent deregistration
Fix the destroy_unused_implicit_child_mr() to prevent hanging during
parent deregistration as of below [1].
Upon entering destroy_unused_implicit_child_mr(), the reference count
for the implicit MR parent is incremented using:
refcount_inc_not_zero().
A corresponding decrement must be performed if
free_implicit_child_mr_work() is not called.
The code has been updated to properly manage the reference count that
was incremented.
[1]
INFO: task python3:2157 blocked for more than 120 seconds.
Not tainted 6.12.0-rc7+ #1633
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:python3 state:D stack:0 pid:2157 tgid:2157 ppid:1685 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x420/0xd30
schedule+0x47/0x130
__mlx5_ib_dereg_mr+0x379/0x5d0 [mlx5_ib]
? __pfx_autoremove_wake_function+0x10/0x10
ib_dereg_mr_user+0x5f/0x120 [ib_core]
? lock_release+0xc6/0x280
destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs]
uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs]
uobj_destroy+0x3f/0x70 [ib_uverbs]
ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs]
? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs]
? lock_acquire+0xc1/0x2f0
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs]
? lock_release+0xc6/0x280
ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
__x64_sys_ioctl+0x1b0/0xa70
? kmem_cache_free+0x221/0x400
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f20f21f017b
RSP: 002b:00007ffcfc4a77c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffcfc4a78d8 RCX: 00007f20f21f017b
RDX: 00007ffcfc4a78c0 RSI: 00000000c0181b01 RDI: 0000000000000003
RBP: 00007ffcfc4a78a0 R08: 000056147d125190 R09: 00007f20f1f14c60
R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffcfc4a7890
R13: 000000000000001c R14: 000056147d100fc0 R15: 00007f20e365c9d0
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
There are several problems with the way hyp code lazily saves the host's
FPSIMD/SVE state, including:
* Host SVE being discarded unexpectedly due to inconsistent
configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to
result in QEMU crashes where SVE is used by memmove(), as reported by
Eric Auger:
https://issues.redhat.com/browse/RHEL-68997
* Host SVE state is discarded *after* modification by ptrace, which was an
unintentional ptrace ABI change introduced with lazy discarding of SVE state.
* The host FPMR value can be discarded when running a non-protected VM,
where FPMR support is not exposed to a VM, and that VM uses
FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR
before unbinding the host's FPSIMD/SVE/SME state, leaving a stale
value in memory.
Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME
state when loading a vCPU such that KVM does not need to save any of the
host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is
removed and the necessary call to fpsimd_save_and_flush_cpu_state() is
placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr'
should not be used, they are set to NULL; all uses of these will be
removed in subsequent patches.
Historical problems go back at least as far as v5.17, e.g. erroneous
assumptions about TIF_SVE being clear in commit:
8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving")
... and so this eager save+flush probably needs to be backported to ALL
stable trees. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix handling of received connection abort
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix lockdep splat in in6_dump_addrs()
As reported by syzbot, we should not use rcu_dereference()
when rcu_read_lock() is not held.
WARNING: suspicious RCU usage
5.19.0-rc2-syzkaller #0 Not tainted
net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor326/3617:
#0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223
stack backtrace:
CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175
inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300
netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix PM usage_count for console handover
When console is enabled, univ8250_console_setup() calls
serial8250_console_setup() before .dev is set to uart_port. Therefore,
it will not call pm_runtime_get_sync(). Later, when the actual driver
is going to take over univ8250_console_exit() is called. As .dev is
already set, serial8250_console_exit() makes pm_runtime_put_sync() call
with usage count being zero triggering PM usage count warning
(extra debug for univ8250_console_setup(), univ8250_console_exit(), and
serial8250_register_ports()):
[ 0.068987] univ8250_console_setup ttyS0 nodev
[ 0.499670] printk: console [ttyS0] enabled
[ 0.717955] printk: console [ttyS0] printing thread started
[ 1.960163] serial8250_register_ports assigned dev for ttyS0
[ 1.976830] printk: console [ttyS0] disabled
[ 1.976888] printk: console [ttyS0] printing thread stopped
[ 1.977073] univ8250_console_exit ttyS0 usage:0
[ 1.977075] serial8250 serial8250: Runtime PM usage count underflow!
[ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A
[ 1.977812] univ8250_console_setup ttyS0 usage:2
[ 1.978167] printk: console [ttyS0] printing thread started
[ 1.978203] printk: console [ttyS0] enabled
To fix the issue, call pm_runtime_get_sync() in
serial8250_register_ports() as soon as .dev is set for an uart_port
if it has console enabled.
This problem became apparent only recently because 82586a721595 ("PM:
runtime: Avoid device usage count underflows") added the warning
printout. I confirmed this problem also occurs with v5.18 (w/o the
warning printout, obviously). |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables
at early boot to load UEFI Secure Boot certificates, a page fault occurs
in Apple firmware code and EFI runtime services are disabled with the
following logs:
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000
WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0
(Removed some logs from here)
Call Trace:
<TASK>
page_fault_oops+0x4f/0x2c0
? search_bpf_extables+0x6b/0x80
? search_module_extables+0x50/0x80
? search_exception_tables+0x5b/0x60
kernelmode_fixup_or_oops+0x9e/0x110
__bad_area_nosemaphore+0x155/0x190
bad_area_nosemaphore+0x16/0x20
do_kern_addr_fault+0x8c/0xa0
exc_page_fault+0xd8/0x180
asm_exc_page_fault+0x1e/0x30
(Removed some logs from here)
? __efi_call+0x28/0x30
? switch_mm+0x20/0x30
? efi_call_rts+0x19a/0x8e0
? process_one_work+0x222/0x3f0
? worker_thread+0x4a/0x3d0
? kthread+0x17a/0x1a0
? process_one_work+0x3f0/0x3f0
? set_kthread_struct+0x40/0x40
? ret_from_fork+0x22/0x30
</TASK>
---[ end trace 1f82023595a5927f ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get mokx list
integrity: Couldn't get size: 0x80000000
So we avoid reading these UEFI variables and thus prevent the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: Fix inflight count imbalances and IO hangs on offline
iolatency needs to track the number of inflight IOs per cgroup. As this
tracking can be expensive, it is disabled when no cgroup has iolatency
configured for the device. To ensure that the inflight counters stay
balanced, iolatency_set_limit() freezes the request_queue while manipulating
the enabled counter, which ensures that no IO is in flight and thus all
counters are zero.
Unfortunately, iolatency_set_limit() isn't the only place where the enabled
counter is manipulated. iolatency_pd_offline() can also dec the counter and
trigger disabling. As this disabling happens without freezing the q, this
can easily happen while some IOs are in flight and thus leak the counts.
This can be easily demonstrated by turning on iolatency on an one empty
cgroup while IOs are in flight in other cgroups and then removing the
cgroup. Note that iolatency shouldn't have been enabled elsewhere in the
system to ensure that removing the cgroup disables iolatency for the whole
device.
The following keeps flipping on and off iolatency on sda:
echo +io > /sys/fs/cgroup/cgroup.subtree_control
while true; do
mkdir -p /sys/fs/cgroup/test
echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency
sleep 1
rmdir /sys/fs/cgroup/test
sleep 1
done
and there's concurrent fio generating direct rand reads:
fio --name test --filename=/dev/sda --direct=1 --rw=randread \
--runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k
while monitoring with the following drgn script:
while True:
for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()):
for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list):
blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node')
pd = blkg.pd[prog['blkcg_policy_iolatency'].plid]
if pd.value_() == 0:
continue
iolat = container_of(pd, 'struct iolatency_grp', 'pd')
inflight = iolat.rq_wait.inflight.counter.value_()
if inflight:
print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} '
f'{cgroup_path(css.cgroup).decode("utf-8")}')
time.sleep(1)
The monitoring output looks like the following:
inflight=1 sda /user.slice
inflight=1 sda /user.slice
...
inflight=14 sda /user.slice
inflight=13 sda /user.slice
inflight=17 sda /user.slice
inflight=15 sda /user.slice
inflight=18 sda /user.slice
inflight=17 sda /user.slice
inflight=20 sda /user.slice
inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19
inflight=19 sda /user.slice
inflight=19 sda /user.slice
If a cgroup with stuck inflight ends up getting throttled, the throttled IOs
will never get issued as there's no completion event to wake it up leading
to an indefinite hang.
This patch fixes the bug by unifying enable handling into a work item which
is automatically kicked off from iolatency_set_min_lat_nsec() which is
called from both iolatency_set_limit() and iolatency_pd_offline() paths.
Punting to a work item is necessary as iolatency_pd_offline() is called
under spinlocks while freezing a request_queue requires a sleepable context.
This also simplifies the code reducing LOC sans the comments and avoids the
unnecessary freezes which were happening whenever a cgroup's latency target
is newly set or cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Clean up hash direct_functions on register failures
We see the following GPF when register_ftrace_direct fails:
[ ] general protection fault, probably for non-canonical address \
0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[...]
[ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70
[ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...]
[ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206
[ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b
[ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0
[ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001
[ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0
[ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000
[ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000
[ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0
[ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ ] Call Trace:
[ ] <TASK>
[ ] register_ftrace_direct+0x54/0x290
[ ] ? render_sigset_t+0xa0/0xa0
[ ] bpf_trampoline_update+0x3f5/0x4a0
[ ] ? 0xffffffffa00a3000
[ ] bpf_trampoline_link_prog+0xa9/0x140
[ ] bpf_tracing_prog_attach+0x1dc/0x450
[ ] bpf_raw_tracepoint_open+0x9a/0x1e0
[ ] ? find_held_lock+0x2d/0x90
[ ] ? lock_release+0x150/0x430
[ ] __sys_bpf+0xbd6/0x2700
[ ] ? lock_is_held_type+0xd8/0x130
[ ] __x64_sys_bpf+0x1c/0x20
[ ] do_syscall_64+0x3a/0x80
[ ] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ ] RIP: 0033:0x7fa9421defa9
[ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...]
[ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
[ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9
[ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011
[ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000
[ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001
[ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001
[ ] </TASK>
[ ] Modules linked in: klp_vm(OK)
[ ] ---[ end trace 0000000000000000 ]---
One way to trigger this is:
1. load a livepatch that patches kernel function xxx;
2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now);
3. repeat #2 => gpf.
This is because the entry is added to direct_functions, but not removed.
Fix this by remove the entry from direct_functions when
register_ftrace_direct fails.
Also remove the last trailing space from ftrace.c, so we don't have to
worry about it anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: defio: fix the pagelist corruption
Easily hit the below list corruption:
==
list_add corruption. prev->next should be next (ffffffffc0ceb090), but
was ffffec604507edc8. (prev=ffffec604507edc8).
WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26
__list_add_valid+0x53/0x80
CPU: 65 PID: 3959 Comm: fbdev Tainted: G U
RIP: 0010:__list_add_valid+0x53/0x80
Call Trace:
<TASK>
fb_deferred_io_mkwrite+0xea/0x150
do_page_mkwrite+0x57/0xc0
do_wp_page+0x278/0x2f0
__handle_mm_fault+0xdc2/0x1590
handle_mm_fault+0xdd/0x2c0
do_user_addr_fault+0x1d3/0x650
exc_page_fault+0x77/0x180
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fd98fc8fad1
==
Figure out the race happens when one process is adding &page->lru into
the pagelist tail in fb_deferred_io_mkwrite(), another process is
re-initializing the same &page->lru in fb_deferred_io_fault(), which is
not protected by the lock.
This fix is to init all the page lists one time during initialization,
it not only fixes the list corruption, but also avoids INIT_LIST_HEAD()
redundantly.
V2: change "int i" to "unsigned int i" (Geert Uytterhoeven) |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: don't set sb values if can't pass sanity check
If bitmap area contains invalid data, kernel will crash then mdadm
triggers "Segmentation fault".
This is cluster-md speical bug. In non-clustered env, mdadm will
handle broken metadata case. In clustered array, only kernel space
handles bitmap slot info. But even this bug only happened in clustered
env, current sanity check is wrong, the code should be changed.
How to trigger: (faulty injection)
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb
mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb
mdadm -Ss
echo aaa > magic.txt
== below modifying slot 2 bitmap data ==
dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic
dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize
mdadm -A /dev/md0 /dev/sda /dev/sdb
== kernel crashes. mdadm outputs "Segmentation fault" ==
Reason of kernel crash:
In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't
block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T()
trigger "divide error".
Crash log:
kernel: md: md0 stopped.
kernel: md/raid1:md0: not clean -- starting background reconstruction
kernel: md/raid1:md0: active with 2 out of 2 mirrors
kernel: dlm: ... ...
kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1
kernel: md0: invalid bitmap file superblock: bad magic
kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2
kernel: md-cluster: Could not gather bitmaps from slot 2
kernel: divide error: 0000 [#1] SMP NOPTI
kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default
kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]
kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246
kernel: ... ...
kernel: Call Trace:
kernel: ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0]
kernel: md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a]
kernel: load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0]
kernel: md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a]
kernel: do_md_run+0x30/0x100 [md_mod 24ea..d3a]
kernel: md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a]
kernel: ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a]
kernel: ? blkdev_ioctl+0xb1/0x2b0
kernel: block_ioctl+0x3b/0x40
kernel: __x64_sys_ioctl+0x7f/0xb0
kernel: do_syscall_64+0x59/0x80
kernel: ? exit_to_user_mode_prepare+0x1ab/0x230
kernel: ? syscall_exit_to_user_mode+0x18/0x40
kernel: ? do_syscall_64+0x69/0x80
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae
kernel: RIP: 0033:0x7f4a15fa722b
kernel: ... ...
kernel: ---[ end trace 8afa7612f559c868 ]---
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: adapt set backend to use GC transaction API
Use the GC transaction API to replace the old and buggy gc API and the
busy mark approach.
No set elements are removed from async garbage collection anymore,
instead the _DEAD bit is set on so the set element is not visible from
lookup path anymore. Async GC enqueues transaction work that might be
aborted and retried later.
rbtree and pipapo set backends does not set on the _DEAD bit from the
sync GC path since this runs in control plane path where mutex is held.
In this case, set elements are deactivated, removed and then released
via RCU callback, sync GC never fails. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mce: Work around an erratum on fast string copy instructions
A rare kernel panic scenario can happen when the following conditions
are met due to an erratum on fast string copy instructions:
1) An uncorrected error.
2) That error must be in first cache line of a page.
3) Kernel must execute page_copy from the page immediately before that
page.
The fast string copy instructions ("REP; MOVS*") could consume an
uncorrectable memory error in the cache line _right after_ the desired
region to copy and raise an MCE.
Bit 0 of MSR_IA32_MISC_ENABLE can be cleared to disable fast string
copy and will avoid such spurious machine checks. However, that is less
preferable due to the permanent performance impact. Considering memory
poison is rare, it's desirable to keep fast string copy enabled until an
MCE is seen.
Intel has confirmed the following:
1. The CPU erratum of fast string copy only applies to Skylake,
Cascade Lake and Cooper Lake generations.
Directly return from the MCE handler:
2. Will result in complete execution of the "REP; MOVS*" with no data
loss or corruption.
3. Will not result in another MCE firing on the next poisoned cache line
due to "REP; MOVS*".
4. Will resume execution from a correct point in code.
5. Will result in the same instruction that triggered the MCE firing a
second MCE immediately for any other software recoverable data fetch
errors.
6. Is not safe without disabling the fast string copy, as the next fast
string copy of the same buffer on the same CPU would result in a PANIC
MCE.
This should mitigate the erratum completely with the only caveat that
the fast string copy is disabled on the affected hyper thread thus
performance degradation.
This is still better than the OS crashing on MCEs raised on an
irrelevant process due to "REP; MOVS*' accesses in a kernel context,
e.g., copy_page.
Injected errors on 1st cache line of 8 anonymous pages of process
'proc1' and observed MCE consumption from 'proc2' with no panic
(directly returned).
Without the fix, the host panicked within a few minutes on a
random 'proc2' process due to kernel access from copy_page.
[ bp: Fix comment style + touch ups, zap an unlikely(), improve the
quirk function's readability. ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix scheduling while atomic
The driver makes a call into midlayer (fc_remote_port_delete) which can put
the thread to sleep. The thread that originates the call is in interrupt
context. The combination of the two trigger a crash. Schedule the call in
non-interrupt context where it is more safe.
kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000
kernel: Call Trace:
kernel: <IRQ>
kernel: dump_stack+0x66/0x81
kernel: __schedule_bug.cold.90+0x5/0x1d
kernel: __schedule+0x7af/0x960
kernel: schedule+0x28/0x80
kernel: schedule_timeout+0x26d/0x3b0
kernel: wait_for_completion+0xb4/0x140
kernel: ? wake_up_q+0x70/0x70
kernel: __wait_rcu_gp+0x12c/0x160
kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod]
kernel: synchronize_sched+0x6c/0x80
kernel: ? call_rcu_bh+0x20/0x20
kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10
kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod]
kernel: starget_for_each_device+0x85/0xb0 [scsi_mod]
kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod]
kernel: scsi_init_io+0x388/0x3d0 [scsi_mod]
kernel: device_for_each_child+0x54/0x90
kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc]
kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx]
kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx]
kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx]
kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx]
kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx]
kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx]
kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx]
kernel: __handle_irq_event_percpu+0x40/0x180
kernel: handle_irq_event_percpu+0x30/0x80
kernel: handle_irq_event+0x36/0x60 |
