| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An improper access control vulnerability in CatchPulse could allow a non-administrative local attacker to connect to an unrestricted kernel filter communication port and bypass CatchPulse's security policy enforcement. |
| An improper access control check in CatchPulse's named pipe communication interface could allow an attacker to invoke CatchPulse functions. This is limited to operations that enforce more restrictive security policies. |
| A vulnerability has been found in cosmicstack-labs mercury-agent up to 1.1.12. This vulnerability affects the function PermissionManager.checkShellCommand of the file src/capabilities/permissions.ts of the component run_command Handler. Such manipulation leads to incorrect privilege assignment. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities. |
| A vulnerability was found in mf-yang openclaw-cn 2026.2.5. This affects an unknown part of the file src/agents/bash-tools.exec.ts of the component Ggateway Exec Approval Flow. The manipulation results in incorrect authorization. The attack may be performed from remote. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in TinyAGI 0.0.20. The affected element is the function buildSystemPrompt of the file packages/server/src/routes/agents.ts. Performing a manipulation results in file inclusion. The attack may be initiated remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in Shibby Tomato 1.28.0000. Affected by this vulnerability is the function new_qoslimit_stop of the file /tmp/qoslimittc_stop.sh. Executing a manipulation of the argument wan_iface can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This project is superseded by FreshTomato. |
| A flaw was found in the Quay registry. While the image labels created through Quay undergo validation both in the UI and backend by applying a regex (validation.py), the same validation is
not performed when the label comes from an image. This flaw allows an attacker to publish a malicious image to a public registry containing a script that can be executed via Cross-site scripting (XSS). |
| A container privilege escalation flaw was found in certain Container-native Virtualization images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: intel-hid: Protect ACPI notify handler against recursion
Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-hid notify_handler() may
run on multiple CPU cores racing with themselves.
On convertibles and detachables (matched by DMI chassis-type 31 and 32 in
dmi_auto_add_switch[]) the SW_TABLET_MODE input device is registered
lazily from notify_handler() on the first tablet-mode event, via
intel_hid_switches_setup(). When two such events race on different CPUs
both can pass the !priv->switches check and register the priv->switches
input device twice, resulting in a duplicate sysfs entry and a subsequent
NULL pointer dereference.
This is the same class of bug fixed by commit e075c3b13a0a ("platform/x86:
intel-vbtn: Protect ACPI notify handler against recursion") for the
sibling intel-vbtn driver.
Protect intel-hid notify_handler() from racing with itself with a mutex
to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()
hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it
to run 2 ms later:
INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup);
schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2));
cfg_setup() dereferences drvdata.hdev to issue MCU command requests.
hid_go_cfg_remove() tears down sysfs and stops the HID device, but
never drains the delayed work. If the device is unbound within the
2 ms scheduling delay (a probe failure rolling back via remove, or a
fast rmmod after probe), the work fires after hid_destroy_device()
has dropped its reference and released the underlying hdev struct,
leaving cfg_setup() with a stale drvdata.hdev pointer.
Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove()
already calls cancel_delayed_work_sync() on its analogous work, and
drain go_cfg_setup at the top of hid_go_cfg_remove(). The cancel
must come before guard(mutex)(&drvdata.cfg_mutex) because cfg_setup()
acquires that mutex; reversing the order would deadlock. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Chouby Polylang and Chouby Polylang Pro allows Retrieve Embedded Sensitive Data.
This issue affects Polylang: through 3.8.5; Polylang Pro: through 3.8.5. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning
When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM
driver (e.g. amdgpu for video playback in GNOME Videos / Showtime)
triggers a spurious warning:
DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \
overlapping mappings aren't supported
WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0
The call chain is:
amdgpu_cs_ioctl
-> amdgpu_ttm_backend_bind
-> dma_buf_map_attachment
-> [udmabuf] map_udmabuf -> get_sg_table
-> dma_map_sgtable(dev, sg, direction, 0) // attrs=0
-> debug_dma_map_sg -> add_dma_entry -> EEXIST
This happens because udmabuf builds a per-page scatter-gather list via
sg_set_folio(). When begin_cpu_udmabuf() has already created an sg
table mapped for the misc device, and an importer such as amdgpu maps
the same pages for its own device via map_udmabuf(), the DMA debug
infrastructure sees two active mappings whose physical addresses share
cacheline boundaries and warns about the overlap.
The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check in
add_dma_entry() because it signals that no CPU cache maintenance is
performed at map/unmap time, making the cacheline overlap harmless.
All other major dma-buf exporters already pass this flag:
- drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC
- amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNC
The CPU sync at map/unmap time is also redundant for udmabuf:
begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit
cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU
access is requested through the dma-buf interface.
Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() and
dma_unmap_sgtable() in udmabuf to suppress the spurious warning and
skip the redundant sync. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid WARNING in sva unbind path
The Intel IOMMU driver allows SVA on devices even if they do not support
PCI/PRI. Commit 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when
PRI is supported") modified the SVA bind path to allow this configuration
by skipping IOPF enablement when PRI is missing. However, it failed to
update the unbind path.
This creates an imbalance: the unbind path attempts to disable IOPF for
a device that never had it enabled, triggering a WARNING in
intel_iommu_disable_iopf():
WARNING: drivers/iommu/intel/iommu.c:3475 at intel_iommu_disable_iopf+0x4f/0x90d
Call Trace:
<TASK>
blocking_domain_set_dev_pasid+0x50/0x70
iommu_detach_device_pasid+0x89/0xc0
iommu_sva_unbind_device+0x73/0x150
xe_vm_close_and_put+0x4d2/0x1200 [xe]
Fix this by bypassing IOPF operations for SVA domains on non-PRI hardware
in both the bind and unbind paths. |
| A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: spear: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode
When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in
guest mode so that a future change can have update CR8 intercepts during
vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion.
------------[ cut here ]------------
debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count))
WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879
WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879
Modules linked in:
CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline]
RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879
Call Trace:
<TASK>
apic_update_ppr arch/x86/kvm/lapic.c:984 [inline]
kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023
kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986
kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847
kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201
kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
No functional change intended. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. ClickHouse's PostgreSQL integration intentionally allows users with valid PostgreSQL credentials to execute queries against a remote PostgreSQL server. No vulnerability in ClickHouse is exploited; code execution occurs on the downstream PostgreSQL server using credentials explicitly provided by the user with specific pg_execute_server_program permission, exploiting a feature that was wrongly reported as CVE-2019-9193 in PostgreSQL (https://www.postgresql.org/about/news/cve-2019-9193-not-a-security-vulnerability-1935/). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Unconditionally sfence.vma for spurious fault
Svvptc does not guarantee that it's safe to just return here. Since we
have already cleared our bit, if, theoretically, the bounded timeframe
for the accessed page to become valid still hasn't happened after sret,
we could fault again and actually crash.
Hopefully, these spurious faults should be rare enough that this is an
acceptable slowdown. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not trim a device which is not writeable
[BUG]
There is a bug report that btrfs/242 can randomly fail with the
following NULL pointer dereference:
run fstests btrfs/242 at 2026-06-01 10:25:08
BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609)
BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874
BTRFS info (device sdc): using crc32c checksum algorithm
BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing
BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing
BTRFS info (device sdc): allowing degraded mounts
BTRFS info (device sdc): turning on async discard
BTRFS info (device sdc): enabling free space tree
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000
CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_trim_fs+0x34c/0xa00 [btrfs]
lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs]
Call trace:
btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P)
btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840]
btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840]
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x5c/0xd0
el0_svc_common.constprop.0+0x40/0xf0
do_el0_svc+0x24/0x40
el0_svc+0x40/0x1d0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00)
---[ end trace 0000000000000000 ]---
Also the reporter is very kind to test the following ASSERT() added to
btrfs_trim_free_extents_throttle():
ASSERT(device->bdev,
"devid=%llu path=%s dev_state=0x%lx\n",
device->devid, btrfs_dev_name(device), device->dev_state);
And it shows the following output:
assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82)
Which means the device->bdev is NULL, and the dev_state is
BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without
BTRFS_DEV_STATE_WRITEABLE flag set.
[CAUSE]
The pc points to the following call chain:
btrfs_trim_fs()
|- btrfs_trim_free_extents()
|- btrfs_trim_free_extents_throttle()
|- bdev_max_discard_sectors(device->bdev)
So the NULL pointer dereference is caused by device->bdev being NULL.
This looks impossible by a quick glance, as just before calling
btrfs_trim_free_extents_throttle(), we have skipped any device that has
BTRFS_DEV_STATE_MISSING flag set.
However in this particular case, there is a window where the missing
device is later re-scanned, causing btrfs to remove the
BTRFS_DEV_STATE_MISSING flag:
btrfs_control_ioctl()
|- btrfs_scan_one_device()
|- device_list_add()
|- rcu_assign_pointer(device->name, name);
| This updates the missing device's path to the new good path.
|
|- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state)
This removes the BTRFS_DEV_STATE_MISSING flag.
This allows the missing device to re-appear and clear the
BTRFS_DEV_STATE_MISSING flag. However the device still does not have
the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated.
The bdev pointer remains NULL, triggering the crash later.
[FIX]
This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and
device->bdev pointer, and shows a gap in btrfs's re-appearing-device
handling.
The proper handling of re-appearing device will need quite some extra
work, which is out of the context of this small
---truncated--- |
