| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Replace old pointer to new idr
Commit 5e28b7b94408 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Reject wrapped offset in kvm_reset_dirty_gfn()
kvm_reset_dirty_gfn() guards the gfn range with
if (!memslot || (offset + __fls(mask)) >= memslot->npages)
return;
but offset is u64 and the addition is unchecked. The check can be
silently bypassed by a u64 wrap.
The dirty ring backing those entries is MAP_SHARED at
KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the
slot and offset fields of any entry between when the kernel pushes
them and when KVM_RESET_DIRTY_RINGS consumes them. On reset,
kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds
them straight back into this check; only the flags handshake is
treated as the handover, the slot/offset payload is taken on trust.
Crafting two entries
entry[i].offset = 0xffffffffffffffc1
entry[i+1].offset = 0
makes the coalescing loop in kvm_dirty_ring_reset() compute
delta = (s64)(0 - 0xffffffffffffffc1) = 63
which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the
existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn()
call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63;
the sum is 0 in u64 and the bounds check passes.
That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked()
unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() ==
true, i.e. shadow paging, any VM that has allocated shadow roots, or
a write-tracked slot -- it reaches gfn_to_rmap(), which indexes
slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an
out-of-bounds load of a kvm_rmap_head, followed by a conditional
clear of PT_WRITABLE_MASK in whatever the loaded pointer points at.
The path is reachable from any process holding /dev/kvm.
Range-check offset on its own first, so the addition cannot wrap.
memslot->npages is bounded well below U64_MAX, so once offset <
npages holds, offset + __fls(mask) (with __fls(mask) < BITS_PER_LONG)
stays in range. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: restrict several matches to inet family
This is a partial revert of:
commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
to allow ipv4 and ipv6 only.
- xt_mac
- xt_owner
- xt_physdev
These extensions are not used by ebtables in userspace.
Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4
specific. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable()
In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read()
in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit
NULL pointer while trying to access the mutex. We need the connector to
be set before that. Unlike in legacy cases with flag
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised
in bridge_attach(), so add the mhdp->connector_ptr in device structure
to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to
avoid possible NULL pointer dereference in recovery paths like
modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix dirty mapping checking in passthrough mode switching
As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata
object across inactive and active DM tables"), dm-cache assumed table
reload occurs after suspension, while LVM's table preload breaks this
assumption. The dirty mapping check for passthrough mode was designed
around this assumption and is performed during table creation, causing
the check to fail with preload while metadata updates are ongoing. This
risks loading dirty mappings into passthrough mode, resulting in data
loss.
Reproduce steps:
1. Create a writeback cache with zero migration_threshold to produce
dirty mappings
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \
2 migration_threshold 0"
2. Preload a table in passthrough mode
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
3. Write to the first cache block to make it dirty
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
4. Resume the inactive table. Now it's possible to load the dirty block
into passthrough mode.
dmsetup resume cache
Fix by moving the checks to the preresume phase to support table
preloading. Also remove the unused function dm_cache_metadata_all_clean. |
| A vulnerability was found in Wildfly’s management interface. Due to the lack of limitation of sockets for the management interface, it may be possible to cause a denial of service hitting the nofile limit as there is no possibility to configure or set a maximum number of connections. |
| A flaw was found in gnuplot. The X11_graphics() function may lead to a segmentation fault and cause a system crash. |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, the Glances XML-RPC server (glances -s, implemented in glances/server.py) does not validate the HTTP Host header, leaving it vulnerable to DNS rebinding attacks. An attacker can exploit DNS rebinding to exfiltrate the full system monitoring dataset from a victim's browser. This vulnerability is fixed in 4.5.5. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.6, unchecked passwords maximums allow for an arbitrarily large password to be passed into the login API. This spikes CPU and memory, and after testing, crashes, heavily lags any container created, and has even made my docker daemon start to send errors with status code 500 even after the container was destroyed. This vulnerability is fixed in 2.63.6. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.16, a scoped, non-admin File Browser user holding only the Create permission can delete arbitrary files outside their scope (other tenants' data, and the application's own database) via the upload failure-cleanup path. ScopedFs.RemoveAll is the one dereferencing operation that skips the symlink guard every other method enforces. The direct-upload handler runs RemoveAll on the user-controlled path during failed-upload cleanup, gated only by Perm.Create. If an escaping directory symlink already exists inside the user's scope, an authenticated create-only user can delete an out-of-scope target, bypassing both the ScopedFs boundary and the Perm.Delete gate. This vulnerability is fixed in 2.63.16. |
| pnpm is a package manager. Prior to 10.33.4 and 11.0.7, a malicious codeload.github.com server can serve whatever tarball it wants and pnpm will install it regardless of the lockfile. The lockfile does not store the hash of the dependencies from https://codeload.github.com. This means that if this server was compromised or a person's machine configuration was compromised, pnpm would download and install these dependencies. This vulnerability is fixed in 10.33.4 and 11.0.7. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's tarball extraction worker skips integrity verification when the integrity field is absent from the lockfile resolution. If an attacker can both modify pnpm-lock.yaml to remove the integrity: field and cause the referenced registry URL to serve altered package content, pnpm install --frozen-lockfile can install the altered package without an integrity error. npm's npm ci enforces integrity by default; pnpm's behavior of silently skipping verification is a pnpm-specific fail-open gap. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm can persist package-manager bootstrap metadata in the first YAML document of pnpm-lock.yaml. Before the patch, direct pnpm execution trusted an already resolved packageManagerDependencies entry when the committed env lockfile contained matching pnpm and @pnpm/exe versions. A malicious repository could therefore commit package-manager lockfile package records and snapshots that bypassed fresh package-manager resolution, then cause pnpm to install and execute bytes selected by that committed lockfile state during automatic version switching. This vulnerability is fixed in 10.34.2 and 11.5.3. |
| Trivy is a security scanner. Prior to 0.71.1, when Trivy downloads an OCI artifact, it uses the org.opencontainers.image.title annotation from the artifact manifest as the destination filename without validation. An attacker who can make Trivy fetch an attacker-controlled artifact can supply a crafted annotation that resolves to a path outside the intended destination, causing Trivy to write the layer content to an arbitrary location on the host filesystem. This vulnerability is fixed in 0.71.1. |
| LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.5, LibreChat's MCP OAuth implementation does not validate that the resource parameter from OAuth Protected Resource metadata (RFC 9728) matches the configured MCP server URL, allowing a malicious MCP server to steal access tokens intended for a legitimate server. This vulnerability is fixed in 0.8.5. |
| socat versions 1.8.0.0 through 1.8.1.1 contain a heap-based buffer overflow vulnerability that allows a malicious SOCKS5 proxy server to overwrite adjacent heap memory by exploiting a sign-extension flaw in the DOMAINNAME reply parser. During connection setup, the domain name length byte is read through a signed char field causing a negative bytes_to_read value that is implicitly converted to size_t, resulting in an unbounded heap write into the 262-byte reply buffer with attacker-controlled size and content. |
| Vim is an open source, command line text editor. Prior to 9.2.0663, a Vimscript code injection vulnerability exists in s:NetrwLocalRmFile() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when deleting a local file from the browser. A filename derived from the buffer's directory listing is interpolated into an Ex command line passed to :execute with only the backslash character escaped, allowing a crafted filename containing a bar (|) to terminate the intended command and execute arbitrary Vimscript, including shell commands via :call system() and :!. This vulnerability is fixed in 9.2.0663. |
| Cursor is a code editor built for programming with AI. Prior to 3.0, Cursor runs agent terminal commands in a sandbox by default, and the sandbox grants write access to the command's working directory. A flaw was identified in how the agent could modify the working_directory parameter, which could cause the sandbox to include writable paths outside the intended workspace. A malicious agent could set working_directory to a sensitive location and write arbitrary files outside the workspace under the user's privileges. This enables non-sandboxed Remote Code Execution — for example by overwriting the cursorsandbox helper so later commands run unsandboxed — with no user interaction beyond a benign prompt. This vulnerability is fixed in 3.0. |
