| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kargo manages and automates the promotion of software artifacts. Prior to versions 1.8.7, 1.7.7, and 1.6.3, a bug was found with authentication checks on the `GetConfig()` API endpoint. This allowed unauthenticated users to access this endpoint by specifying an `Authorization` header with any non-empty `Bearer` token value, regardless of validity. This vulnerability did allow for exfiltration of configuration data such as endpoints for connected Argo CD clusters. This data could allow an attacker to enumerate cluster URLs and namespaces for use in subsequent attacks. Additionally, the same bug affected the `RefreshResource` endpoint. This endpoint does not lead to any information disclosure, but could be used by an unauthenticated attacker to perform a denial-of-service style attack against the Kargo API. `RefreshResource` sets an annotation on specific Kubernetes resources to trigger reconciliations. If run on a constant loop, this could also slow down legitimate requests to the Kubernetes API server. This problem has been patched in Kargo versiosn 1.8.7, 1.7.7, and 1.6.3. There are no workarounds for this issue. |
| PHPUnit is a testing framework for PHP. A vulnerability has been discovered in versions prior to 12.5.8, 11.5.50, 10.5.62, 9.6.33, and 8.5.52 involving unsafe deserialization of code coverage data in PHPT test execution. The vulnerability exists in the `cleanupForCoverage()` method, which deserializes code coverage files without validation, potentially allowing remote code execution if malicious `.coverage` files are present prior to the execution of the PHPT test. The vulnerability occurs when a `.coverage` file, which should not exist before test execution, is deserialized without the `allowed_classes` parameter restriction. An attacker with local file write access can place a malicious serialized object with a `__wakeup()` method into the file system, leading to arbitrary code execution during test runs with code coverage instrumentation enabled. This vulnerability requires local file write access to the location where PHPUnit stores or expects code coverage files for PHPT tests. This can occur through CI/CD pipeline attacks, the local development environment, and/or compromised dependencies. Rather than just silently sanitizing the input via `['allowed_classes' => false]`, the maintainer has chosen to make the anomalous state explicit by treating pre-existing `.coverage` files for PHPT tests as an error condition. Starting in versions in versions 12.5.8, 11.5.50, 10.5.62, 9.6.33, when a `.coverage` file is detected for a PHPT test prior to execution, PHPUnit will emit a clear error message identifying the anomalous state. Organizations can reduce the effective risk of this vulnerability through proper CI/CD configuration, including ephemeral runners, code review enforcement, branch protection, artifact isolation, and access control. |
| Issue summary: PBMAC1 parameters in PKCS#12 files are missing validation
which can trigger a stack-based buffer overflow, invalid pointer or NULL
pointer dereference during MAC verification.
Impact summary: The stack buffer overflow or NULL pointer dereference may
cause a crash leading to Denial of Service for an application that parses
untrusted PKCS#12 files. The buffer overflow may also potentially enable
code execution depending on platform mitigations.
When verifying a PKCS#12 file that uses PBMAC1 for the MAC, the PBKDF2
salt and keylength parameters from the file are used without validation.
If the value of keylength exceeds the size of the fixed stack buffer used
for the derived key (64 bytes), the key derivation will overflow the buffer.
The overflow length is attacker-controlled. Also, if the salt parameter is
not an OCTET STRING type this can lead to invalid or NULL pointer
dereference.
Exploiting this issue requires a user or application to process
a maliciously crafted PKCS#12 file. It is uncommon to accept untrusted
PKCS#12 files in applications as they are usually used to store private
keys which are trusted by definition. For this reason the issue was assessed
as Moderate severity.
The FIPS modules in 3.6, 3.5 and 3.4 are not affected by this issue, as
PKCS#12 processing is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5 and 3.4 are vulnerable to this issue.
OpenSSL 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue as they do
not support PBMAC1 in PKCS#12. |
| Issue summary: Parsing CMS AuthEnvelopedData message with maliciously
crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| xrdp is an open source RDP server. xrdp before v0.10.5 contains an unauthenticated stack-based buffer overflow vulnerability. The issue stems from improper bounds checking when processing user domain information during the connection sequence. If exploited, the vulnerability could allow remote attackers to execute arbitrary code on the target system. The vulnerability allows an attacker to overwrite the stack buffer and the return address, which could theoretically be used to redirect the execution flow. The impact of this vulnerability is lessened if a compiler flag has been used to build the xrdp executable with stack canary protection. If this is the case, a second vulnerability would need to be used to leak the stack canary value. Upgrade to version 0.10.5 to receive a patch. Additionally, do not rely on stack canary protection on production systems. |
| Issue summary: A type confusion vulnerability exists in the TimeStamp Response
verification code where an ASN1_TYPE union member is accessed without first
validating the type, causing an invalid or NULL pointer dereference when
processing a malformed TimeStamp Response file.
Impact summary: An application calling TS_RESP_verify_response() with a
malformed TimeStamp Response can be caused to dereference an invalid or
NULL pointer when reading, resulting in a Denial of Service.
The functions ossl_ess_get_signing_cert() and ossl_ess_get_signing_cert_v2()
access the signing cert attribute value without validating its type.
When the type is not V_ASN1_SEQUENCE, this results in accessing invalid memory
through the ASN1_TYPE union, causing a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
TimeStamp Response to an application that verifies timestamp responses. The
TimeStamp protocol (RFC 3161) is not widely used and the impact of the
exploit is just a Denial of Service. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the TimeStamp Response implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| The vulnerability stems from an incorrect error-checking logic in the CreateCounter() function (in threadx/utility/rtos_compatibility_layers/OSEK/tx_osek.c) when handling the return value of osek_get_counter(). Specifically, the current code checks if cntr_id equals 0u to determine failure, but @osek_get_counter() actually returns E_OS_SYS_STACK (defined as 12U) when it fails. This mismatch causes the error branch to never execute even when the counter pool is exhausted.
As a result, when the counter pool is depleted, the code proceeds to cast the error code (12U) to a pointer (OSEK_COUNTER *), creating a wild pointer. Subsequent writes to members of this pointer lead to writes to illegal memory addresses (e.g., 0x0000000C), which can trigger immediate HardFaults or silent memory corruption.
This vulnerability poses significant risks, including potential denial-of-service attacks (via repeated calls to exhaust the counter pool) and unauthorized memory access. |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously
crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing
non-ASCII BMP code point can trigger a one byte write before the allocated
buffer.
Impact summary: The out-of-bounds write can cause a memory corruption
which can have various consequences including a Denial of Service.
The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12
BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes,
the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16
source byte count as the destination buffer capacity to UTF8_putc(). For BMP
code points above U+07FF, UTF-8 requires three bytes, but the forwarded
capacity can be just two bytes. UTF8_putc() then returns -1, and this negative
value is added to the output length without validation, causing the
length to become negative. The subsequent trailing NUL byte is then written
at a negative offset, causing write outside of heap allocated buffer.
The vulnerability is reachable via the public PKCS12_get_friendlyname() API
when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a
different code path that avoids this issue, PKCS12_get_friendlyname() directly
invokes the vulnerable function. Exploitation requires an attacker to provide
a malicious PKCS#12 file to be parsed by the application and the attacker
can just trigger a one zero byte write before the allocated buffer.
For that reason the issue was assessed as Low severity according to our
Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| The Database for Contact Form 7, WPforms, Elementor forms plugin for WordPress is vulnerable to authorization bypass due to missing capability checks on the CSV export functionality in all versions up to, and including, 1.4.5. This makes it possible for unauthenticated attackers to download sensitive form submission data containing personally identifiable information (PII) by accessing the CSV export endpoint with an export key that is exposed in publicly accessible page source code. The vulnerability is created because while the shortcode properly filters displayed entries by user, the CSV export handler completely bypasses this filtering and exports all entries regardless of user permissions. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Versions prior to 1.16.3 and 1.15.3 have a critical authorization boundary bypass in namespaced Kyverno Policy apiCall. The resolved `urlPath` is executed using the Kyverno admission controller ServiceAccount, with no enforcement that the request is limited to the policy’s namespace. As a result, any authenticated user with permission to create a namespaced Policy can cause Kyverno to perform Kubernetes API requests using Kyverno’s admission controller identity, targeting any API path allowed by that ServiceAccount’s RBAC. This breaks namespace isolation by enabling cross-namespace reads (for example, ConfigMaps and, where permitted, Secrets) and allows cluster-scoped or cross-namespace writes (for example, creating ClusterPolicies) by controlling the urlPath through context variable substitution. Versions 1.16.3 and 1.15.3 contain a patch for the vulnerability. |
| An Authentication Bypass Using an
Alternate Path or Channel vulnerability in Juniper Networks Session Smart
Router may allows a network-based attacker to bypass authentication
and take administrative control of the device.
This issue affects Session Smart Router:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects Session Smart Conductor:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects WAN Assurance Managed Routers:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2. |
| OpenProject is an open-source, web-based project management software. Versions prior to 16.6.6 and 17.0.2 have an arbitrary file write vulnerability in OpenProject’s repository diff download endpoint (`/projects/:project_id/repository/diff.diff`) when rendering a single revision via git show. By supplying a specially crafted rev value (for example, `rev=--output=/tmp/poc.txt)`, an attacker can inject git show command-line options. When OpenProject executes the SCM command, Git interprets the attacker-controlled rev as an option and writes the output to an attacker-chosen path. As a result, any user with the `:browse_repository` permission on the project can create or overwrite arbitrary files that the OpenProject process user is permitted to write. The written contents consist of git show output (commit metadata and patch), but overwriting application or configuration files still leads to data loss and denial of service, impacting integrity and availability. The issue has been fixed in OpenProject 17.0.2 and 16.6.6. |
| OpenProject is an open-source, web-based project management software. In the new editor for collaborative documents based on BlockNote, OpenProject maintainers added a custom extension in OpenProject version 17.0.0 that allows to mention OpenProject work packages in the document. To show work package details, the editor loads details about the work package via the OpenProject API. For this API call, the extension to the BlockNote editor did not properly validate the given work package ID to be only a number. This allowed an attacker to generate a document with relative links that upon opening could make arbitrary `GET` requests to any URL within the OpenProject instance. This issue was patched in version version 0.0.22 of op-blocknote-extensions, which was shipped with OpenProject 17.0.2. If users cannot update immediately to version 17.0.2 of OpenProject, administrators can disable collaborative document editing in Settings -> Documents -> Real time collaboration -> Disable. |
| OpenProject is an open-source, web-based project management software. To enable the real time collaboration on documents, OpenProject 17.0 introduced a synchronization server. The OpenPrioject backend generates an authentication token that is currently valid for 24 hours, encrypts it with a shared secret only known to the synchronization server. The frontend hands this encrypted token and the backend URL over to the synchronization server to check user's ability to work on the document and perform intermittent saves while editing. The synchronization server does not properly validate the backend URL and sends a request with the decrypted authentication token to the endpoint that was given to the server. An attacker could use this vulnerability to decrypt a token that he intercepted by other means to gain an access token to interact with OpenProject on the victim's behalf. This vulnerability was introduced with OpenProject 17.0.0 and was fixed in 17.0.2. As a workaround, disable the collaboration feature via Settings -> Documents -> Real time collaboration -> Disable. Additionally the `hocuspocus` container should also be disabled. |
| Program Access Controller 1.2.0.0 contains an unquoted service path vulnerability in PACService.exe that allows local attackers to execute code with elevated privileges. Attackers can exploit the unquoted path during system startup or reboot to inject and run malicious executables with LocalSystem permissions. |
| The Snow Monkey Forms plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'generate_user_dirpath' function in all versions up to, and including, 12.0.3. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| Podman Desktop is a graphical tool for developing on containers and Kubernetes. A critical authentication bypass vulnerability in Podman Desktop prior to version 1.25.1 allows any extension to completely circumvent permission checks and gain unauthorized access to all authentication sessions. The `isAccessAllowed()` function unconditionally returns `true`, enabling malicious extensions to impersonate any user, hijack authentication sessions, and access sensitive resources without authorization. This vulnerability affects all versions of Podman Desktop. Version 1.25.1 contains a patch for the issue. |
| A weakness has been identified in Open5GS up to 2.7.6. This vulnerability affects the function sgwc_s5c_handle_modify_bearer_response of the file src/sgwc/s5c-handler.c of the component SGWC. Executing a manipulation can lead to denial of service. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This patch is called b19cf6a. Applying a patch is advised to resolve this issue. The issue report is flagged as already-fixed. |
| A vulnerability was identified in D-Link DCS-700L 1.03.09. The affected element is the function uploadmusic of the file /setUploadMusic of the component Music File Upload Service. The manipulation of the argument UploadMusic leads to path traversal. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A security flaw has been discovered in code-projects Online Music Site 1.0. The impacted element is an unknown function of the file /Administrator/PHP/AdminAddCategory.php. The manipulation results in sql injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. |
