| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc
The cpu_id attribute supplied by user space through
UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu()
without first verifying that the value is within the valid CPU range.
Passing such untrusted data to cpumask_test_cpu() may lead to an
out-of-bounds read of the underlying cpumask bitmap: the helper expands
to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with
no bound check.
In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips
the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this
turns a bad user input into a machine reboot.
Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL
before it is used.
Reported by Smatch. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, the bundled Caddy reverse-proxy's admin API — which has no authentication by default — is bound on 0.0.0.0:2019 inside the container. While this listener is not directly published to the host by docker-compose.yml, it is reachable from the Appsmith server process itself or a SSRF vulnerability. An authenticated low-privileged user can therefore drive the SSRF to issue POST /load (or any other admin-API call) against http://0.0.0.0:2019/, fully replacing the live Caddy configuration and taking over the reverse proxy. This vulnerability is fixed in 2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: reset per-IO canceled flag on each fetch
If a ublk server starts recovering devices but dies before issuing fetch
commands for all IOs, cancellation of the fetch commands that were
successfully issued may never complete. This is because the per-IO
canceled flag can remain set even after the fetch for that IO has been
submitted - the per-IO canceled flags for all IOs in a queue are reset
together only once all IOs for that queue have been fetched. So if a
nonempty proper subset of the IOs for a queue are fetched when the ublk
server dies, the IOs in that subset will never successfully be canceled,
as their canceled flags remain set, and this prevents ublk_cancel_cmd
from actually calling io_uring_cmd_done on the commands, despite the
fact that they are outstanding.
Fix this by resetting the per-IO cancel flags immediately when each IO
is fetched instead of waiting for all IOs for the queue (which may never
happen). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: avoid potential null folio->mapping deref during error reporting
When a buffered read fails, iomap_finish_folio_read() reports the error
with fserror_report_io(folio->mapping->host, ...). This is called after
ifs->read_bytes_pending has been decremented by the bytes attempted to
be read.
For a folio split across multiple read completions, the folio is only
guaranteed to stay locked while read_bytes_pending > 0. Once
iomap_finish_folio_read() decrements read_bytes_pending, another
in-flight read can complete and end the read on the folio, which unlocks
it. This allows truncate logic to run and detach the folio (set
folio->mapping to NULL). The error reporting path then can dereference a
NULL folio->mapping. As reported by Sam Sun, this is the race that can
occur:
CPU0: failed completion CPU1: final completion CPU2: truncate
----------------------- ---------------------- --------------
read_bytes_pending -= len
finished = false
/* preempted before
fserror_report_io() */
read_bytes_pending -= len
finished = true
folio_end_read()
truncate clears
folio->mapping
fserror_report_io(
folio->mapping->host, ...)
^ NULL deref
Fix this by reporting the error first before decrementing
ifs->read_bytes_pending. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject oversized EMA RNR lists
nl80211_parse_rnr_elems() stores the parsed element count in a
u8-backed cfg80211_rnr_elems::cnt field and uses that count to size
the flexible array allocation.
Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches
255, before incrementing it again. This keeps the parser aligned with
the data structure it fills and matches the existing bound check used
by nl80211_parse_mbssid_elems(). |
| Gogs is an open source self-hosted Git service. In 0.14.3 and earlier, any authenticated user can watch a private repository they have no access to, because the access check in the Watch API handler is inverted. The code checks if repoCtx.ViewerCanRead() (returns 404 when the user CAN read) instead of if !repoCtx.ViewerCanRead() (return 404 when the user CANNOT read). Once watching, the attacker's dashboard activity feed shows commit messages, branch names, issue titles, and PR details from the private repository. If email notifications are enabled, the attacker also receives emails containing issue and comment content. |
| An improper restriction of operations within the bounds of a memory buffer vulnerability in Portwell Engineering Toolkits version 4.8.2 could allow a local authenticated attacker to read and write to arbitrary memory via the Portwell Engineering Toolkits driver. Successful exploitation of this vulnerability could result in escalation of privileges or cause a denial-of-service condition. |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, Gogs has an unauthenticated information disclosure vulnerability. The GET /api/v1/orgs/:orgname/teams endpoint at internal/route/api/v1/org_team.go:8 returns all teams for any organization without requiring authentication. The route group at internal/route/api/v1/api.go:380-385 lacks the reqToken() middleware, and the listTeams() handler performs no authentication check, exposing team IDs, names, descriptions, and permission levels to any unauthenticated caller. This vulnerability is fixed in 0.14.3. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.0, the ImageElement component in packages/gazzodown renders user-controlled src values directly into <a href> and <img src> attributes without protocol sanitization. Unlike the analogous LinkSpan component — which uses sanitizeUrl to block javascript:, data:, and vbscript: protocols — ImageElement passes the raw URL through unchanged. An authenticated user can post a markdown image with a javascript: URL that, if clicked on an older browser, would execute arbitrary JavaScript in the viewer's session. This vulnerability is fixed in 8.5.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix DMA address corruption due to find_vma misuse
fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.
Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix arithmetic issues in dma_length()
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller. |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, Git smart HTTP authorizes POST …/git-receive-pack using the client-supplied service query string (so ?service=git-upload-pack is evaluated as read access) while routing still runs git receive-pack, allowing push where only read should be allowed. This vulnerability is fixed in 0.14.3. |
| Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have pre-authentication SQL Injection via unanchored FILTER_VALIDATE_REGEXP in graph_view.php. This issue has been fixed in version 1.2.31. |
| An issue in the time_t_to_dt component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex(). |
| In the Linux kernel, the following vulnerability has been resolved:
futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock
When FUTEX_CMP_REQUEUE_PI requeues a non-top waiter that already owns the
target PI futex, task_blocks_on_rt_mutex() returns -EDEADLK before setting
waiter->task.
The subsequent remove_waiter() in rt_mutex_start_proxy_lock() dereferences
the NULL waiter->task, causing a kernel crash.
Add a self-deadlock check for non-top waiters before calling
rt_mutex_start_proxy_lock(), analogous to the top-waiter check in
futex_lock_pi_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix abuse of kprobe_write_ctx via freplace
uprobe programs are allowed to modify struct pt_regs.
Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.
For example,
SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}
SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}
freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.
Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.
To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work. |
