| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask
Commit in Fixes added the FRED CR4 bit to the CR4 pinned bits mask so
that whenever something else modifies CR4, that bit remains set. Which
in itself is a perfectly fine idea.
However, there's an issue when during boot FRED is initialized: first on
the BSP and later on the APs. Thus, there's a window in time when
exceptions cannot be handled.
This becomes particularly nasty when running as SEV-{ES,SNP} or TDX
guests which, when they manage to trigger exceptions during that short
window described above, triple fault due to FRED MSRs not being set up
yet.
See Link tag below for a much more detailed explanation of the
situation.
So, as a result, the commit in that Link URL tried to address this
shortcoming by temporarily disabling CR4 pinning when an AP is not
online yet.
However, that is a problem in itself because in this case, an attack on
the kernel needs to only modify the online bit - a single bit in RW
memory - and then disable CR4 pinning and then disable SM*P, leading to
more and worse things to happen to the system.
So, instead, remove the FRED bit from the CR4 pinning mask, thus
obviating the need to temporarily disable CR4 pinning.
If someone manages to disable FRED when poking at CR4, then
idt_invalidate() would make sure the system would crash'n'burn on the
first exception triggered, which is a much better outcome security-wise. |
| @astrojs/node allows Astro to deploy your SSR site to Node targets. Prior to 10.0.5, requesting a static js/css resources from _astro path with an incorrect/malformed if-match header returns a 500 error with a one year cache lifetime instead of 412 in some cases. This has the effect that all subsequent requests to that file, regardless of if-match header will be served a 5xx error instead of the file until the cache expires. This vulnerability is fixed in 10.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-dw-dma: fix print error log when wait finish transaction
If an error occurs, the device may not have a current message. In this
case, the system will crash.
In this case, it's better to use dev from the struct ctlr (struct spi_controller*). |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Fix kernel panic due to __initconst misuse
Fix a kernel panic when probing the driver as a module:
Unable to handle kernel paging request at virtual address
ffffd9c18eb05000
of_find_matching_node_and_match+0x5c/0x1a0
hantro_probe+0x2f4/0x7d0 [hantro_vpu]
The imx8mq_vpu_shared_resources array is referenced by variant
structures through their shared_devices field. When built as a
module, __initconst causes this data to be freed after module
init, but it's later accessed during probe, causing a page fault.
The imx8mq_vpu_shared_resources is referenced from non-init code,
so keeping __initconst or __initconst_or_module here is wrong.
Drop the __initconst annotation and let it live in the normal .rodata
section.
A bug of __initconst called from regular non-init probe code
leading to bugs during probe deferrals or during unbind-bind cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fix cached_dev.sb_bio use-after-free and crash
In our production environment, we have received multiple crash reports
regarding libceph, which have caught our attention:
```
[6888366.280350] Call Trace:
[6888366.280452] blk_update_request+0x14e/0x370
[6888366.280561] blk_mq_end_request+0x1a/0x130
[6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd]
[6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd]
[6888366.280903] __complete_request+0x22/0x70 [libceph]
[6888366.281032] osd_dispatch+0x15e/0xb40 [libceph]
[6888366.281164] ? inet_recvmsg+0x5b/0xd0
[6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph]
[6888366.281405] ceph_con_process_message+0x79/0x140 [libceph]
[6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph]
[6888366.281661] ceph_con_workfn+0x329/0x680 [libceph]
```
After analyzing the coredump file, we found that the address of
dc->sb_bio has been freed. We know that cached_dev is only freed when it
is stopped.
Since sb_bio is a part of struct cached_dev, rather than an alloc every
time. If the device is stopped while writing to the superblock, the
released address will be accessed at endio.
This patch hopes to wait for sb_write to complete in cached_dev_free.
It should be noted that we analyzed the cause of the problem, then tell
all details to the QWEN and adopted the modifications it made. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix use-after-free on disconnect
In usb6fire_chip_abort(), the chip struct is allocated as the card's
private data (via snd_card_new with sizeof(struct sfire_chip)). When
snd_card_free_when_closed() is called and no file handles are open, the
card and embedded chip are freed synchronously. The subsequent
chip->card = NULL write then hits freed slab memory.
Call trace:
usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline]
usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182
usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458
...
hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953
Fix by moving the card lifecycle out of usb6fire_chip_abort() and into
usb6fire_chip_disconnect(). The card pointer is saved in a local
before any teardown, snd_card_disconnect() is called first to prevent
new opens, URBs are aborted while chip is still valid, and
snd_card_free_when_closed() is called last so chip is never accessed
after the card may be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix use-after-free on USB disconnect
After powerz_disconnect() frees the URB and releases the mutex, a
subsequent powerz_read() call can acquire the mutex and call
powerz_read_data(), which dereferences the freed URB pointer.
Fix by:
- Setting priv->urb to NULL in powerz_disconnect() so that
powerz_read_data() can detect the disconnected state.
- Adding a !priv->urb check at the start of powerz_read_data()
to return -ENODEV on a disconnected device.
- Moving usb_set_intfdata() before hwmon registration so the
disconnect handler can always find the priv pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix use-after-free in em28xx_v4l2_open()
em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock,
creating a race with em28xx_v4l2_init()'s error path and
em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct
and set dev->v4l2 to NULL under dev->lock.
This race leads to two issues:
- use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler,
since the video_device is embedded in the freed em28xx_v4l2 struct.
- NULL pointer dereference in em28xx_resolution_set() when accessing
v4l2->norm, since dev->v4l2 has been set to NULL.
Fix this by moving the mutex_lock() before the dev->v4l2 read and
adding a NULL check for dev->v4l2 under the lock. |
| Improper neutralization of escape, meta, or control sequences in Microsoft Power Apps allows an authorized attacker to perform spoofing over a network. |
| A vulnerability exists in the Buffalo Link Station version 1.85-0.01 that allows unauthenticated or guest-level users to enumerate valid usernames and their associated privilege roles. The issue is triggered by modifying a parameter within requests sent to the /nasapi endpoint. |
| Improper access control in Doorman v0.1.0 and v1.0.2 allows any authenticated user to update their own account role to a non-admin privileged role via /platform/user/{username}. The `role` field is accepted by the update model without a manage_users permission check for self-updates, enabling privilege escalation to high-privileged roles. |
| SQL Injection vulnerability in Apartment Visitors Management System Apartment Visitors Management System V1.1 within the username parameter of the login page (index.php). This allows an unauthenticated attacker to manipulate backend SQL queries during authentication and retrieve sensitive database contents. |
| SQL Injection vulnerability in Apartment Visitors Management System Apartment Visitors Management System V1.1 in the contactno parameter of the forgot password page (forgot-password.php). This allows an unauthenticated attacker to manipulate backend SQL queries during authentication and retrieve sensitive database contents. |
| SQL Injection vulnerability in Apartment Visitors Management System Apartment Visitors Management System V1.1 in the email parameter of the forgot password page (forgot-password.php). This allows an unauthenticated attacker to manipulate backend SQL queries and retrieve sensitive user data. |
| Cross Site Scripting vulnerability in Apartment Visitors Management System Apartment Visitors Management System V1.1 in the visname parameter of visitors-form.php. An authenticated attacker can inject arbitrary JavaScript that is later executed when the malicious input is viewed in manage-newvisitors.php or visitor-detail.php. |
| Insufficient validation of Chrome extension identifiers in Raindrop.io Bookmark Manager Web App 5.6.76.0 allows attackers to obtain sensitive user data via a crafted request. |
| A reflected cross-site scripting (XSS) vulnerability in the AdvancedSearch functionality of Silverpeas Core before version 6.4.6 allows attackers to execute arbitrary JavaScript in the context of a user's browser via crafted input. |
| An issue was discovered in guardsix (formerly Logpoint) ODBC Enrichment Plugins before 5.2.1 (5.2.1 is used in guardsix 7.9.0.0). A logic flaw allowed stored database credentials to be reused after modification of the target Host, IP address, or Port. When editing an existing Enrichment Source, previously stored credentials were retained even if the connection endpoint was changed. An authenticated Operator user could redirect the database connection to unintended internal systems, resulting in SSRF and potential misuse of valid stored credentials. |
| A flaw was found in nano. A local user could exploit a format string vulnerability in the `statusline()` function. By creating a directory with a name containing `printf` specifiers, the application attempts to display this name, leading to a segmentation fault (SEGV). This results in a Denial of Service (DoS) for the `nano` application. |
| A flaw was found in camel-infinispan. This vulnerability involves unsafe deserialization in the ProtoStream remote aggregation repository. A remote attacker with low privileges could exploit this by sending specially crafted data, leading to arbitrary code execution. This allows the attacker to gain full control over the affected system, impacting its confidentiality, integrity, and availability. |
