| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
[ij: edited the commit message.] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix kernel async DIO
Netfslib needs to be able to handle kernel-initiated asynchronous DIO that
is supplied with a bio_vec[] array. Currently, because of the async flag,
this gets passed to netfs_extract_user_iter() which throws a warning and
fails because it only handles IOVEC and UBUF iterators. This can be
triggered through a combination of cifs and a loopback blockdev with
something like:
mount //my/cifs/share /foo
dd if=/dev/zero of=/foo/m0 bs=4K count=1K
losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0
echo hello >/dev/loop2046
This causes the following to appear in syslog:
WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs]
and the write to fail.
Fix this by removing the check in netfs_unbuffered_write_iter_locked() that
causes async kernel DIO writes to be handled as userspace writes. Note
that this change relies on the kernel caller maintaining the existence of
the bio_vec array (or kvec[] or folio_queue) until the op is complete. |
| A Host Header Injection vulnerability exists in the password reset functionality of CraftMyCMS 4.0.2.2. The system uses `$_SERVER['HTTP_HOST']` directly to construct password reset links sent via email. An attacker can manipulate the Host header to send malicious reset links, enabling phishing attacks or account takeover. |
| NAVER MYBOX Explorer for Windows before 3.0.8.133 allows a local attacker to escalate privileges to NT AUTHORITY\SYSTEM by invoking arbitrary DLLs due to improper privilege checks. |
| NAVER MYBOX Explorer for Windows before 3.0.8.133 allows a local attacker to escalate privileges to NT AUTHORITY\SYSTEM by executing arbitrary files due to improper privilege checks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
The blamed commit disabled hardware offoad of IPv6 packets with
extension headers on devices that advertise NETIF_F_IPV6_CSUM,
based on the definition of that feature in skbuff.h:
* * - %NETIF_F_IPV6_CSUM
* - Driver (device) is only able to checksum plain
* TCP or UDP packets over IPv6. These are specifically
* unencapsulated packets of the form IPv6|TCP or
* IPv6|UDP where the Next Header field in the IPv6
* header is either TCP or UDP. IPv6 extension headers
* are not supported with this feature. This feature
* cannot be set in features for a device with
* NETIF_F_HW_CSUM also set. This feature is being
* DEPRECATED (see below).
The change causes skb_warn_bad_offload to fire for BIG TCP
packets.
[ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0
[ 496.310297] ? skb_warn_bad_offload+0xc4/0xe0
[ 496.310300] skb_checksum_help+0x129/0x1f0
[ 496.310303] skb_csum_hwoffload_help+0x150/0x1b0
[ 496.310306] validate_xmit_skb+0x159/0x270
[ 496.310309] validate_xmit_skb_list+0x41/0x70
[ 496.310312] sch_direct_xmit+0x5c/0x250
[ 496.310317] __qdisc_run+0x388/0x620
BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to
communicate packet length, as this is an IPv6 jumbogram. But, the
feature is only enabled on devices that support BIG TCP TSO. The
header is only present for PF_PACKET taps like tcpdump, and not
transmitted by physical devices.
For this specific case of extension headers that are not
transmitted, return to the situation before the blamed commit
and support hardware offload.
ipv6_has_hopopt_jumbo() tests not only whether this header is present,
but also that it is the only extension header before a terminal (L4)
header. |
| CVE-2025-54086 is an excess permissions vulnerability in the
Warehouse component of Absolute Secure Access prior to version 14.10. Attackers
with access to the local file system can read the Java keystore file. The
attack complexity is low, there are no attack requirements, the privileges
required are low and no user interaction is required. Impact to confidentiality
is low, there is no impact to integrity or availability. |
| CVE-2025-54087 is a server-side request forgery
vulnerability in Secure Access prior to version 14.10. Attackers with
administrative privileges can publish a crafted test HTTP request originating
from the Secure Access server. The attack complexity is high, there are no
attack requirements, and user interaction is required. There is no direct
impact to confidentiality, integrity, or availability. There is a low severity
subsequent system impact to integrity. |
| CVE-2025-54088 is an open-redirect vulnerability in Secure
Access prior to version 14.10. Attackers with access to the console can
redirect victims to an arbitrary URL. The attack complexity is low, attack
requirements are present, no privileges are required, and users must actively
participate in the attack. Impact to confidentiality is low and there is no
impact to integrity or availability. There are high severity impacts to
confidentiality, integrity, availability in subsequent systems. |
| CVE-2025-54089 is a cross-site scripting vulnerability in versions
of secure access prior to 14.10. Attackers with administrative access to the
console can interfere with another administrator’s access to the console. The
attack complexity is low; there are no attack requirements. Privileges required
to execute the attack are high and the victim must actively participate in the
attack sequence. There is no impact to confidentiality or availability, there
is a low impact to integrity. |
| Cursor is a code editor built for programming with AI. Versions 1.6.23 and below contain case-sensitive checks in the way Cursor IDE protects its sensitive files (e.g., */.cursor/mcp.json), which allows attackers to modify the content of these files through prompt injection and achieve remote code execution. A prompt injection can lead to full RCE through modifying sensitive files on case-insensitive fileystems. This issue is fixed in version 1.7. |
| Allstar is a GitHub App to set and enforce security policies. In versions prior to 4.5, a vulnerability in Allstar’s Reviewbot component caused inbound webhook requests to be validated against a hard-coded, shared secret. The value used for the secret token was compiled into the Allstar binary and could not be configured at runtime. In practice, this meant that every deployment using Reviewbot would validate requests with the same secret unless the operator modified source code and rebuilt the component - an expectation that is not documented and is easy to miss. All Allstar releases prior to v4.5 that include the Reviewbot code path are affected. Deployments on v4.5 and later are not affected. Those who have not enabled or exposed the Reviewbot endpoint are not exposed to this issue. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. Versions prior to 2.5.3 and 2.2.15 are vulnerable to Command Line Injection attacks on Windows when batch files are executed. In Windows, ``CreateProcess()`` always implicitly spawns ``cmd.exe`` if a batch file (.bat, .cmd, etc.) is being executed even if the application does not specify it via the command line. This makes Deno vulnerable to a command injection attack on Windows. Versions 2.5.3 and 2.2.15 fix the issue. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. In versions prior to 2.5.3 and 2.2.15, `Deno.FsFile.prototype.stat` and `Deno.FsFile.prototype.statSync` are not limited by the permission model check `--deny-read=./`. It's possible to retrieve stats from files that the user do not have explicit read access to (the script is executed with `--deny-read=./`). Similar APIs like `Deno.stat` and `Deno.statSync` require `allow-read` permission, however, when a file is opened, even with file-write only flags and deny-read permission, it's still possible to retrieve file stats, and thus bypass the permission model. Versions 2.5.3 and 2.2.15 fix the issue. |
| IBM Standards Processing Engine 10.0.1.10 could allow a remote attacker to execute arbitrary code on the system, caused by an unsafe java deserialization. By sending specially crafted input, an attacker could exploit this vulnerability to execute arbitrary code on the system. |
| IBM MQ 9.1, 9.2, 9.3, 9.4 LTS and 9.3, 9.4 CD is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. In versions prior to 2.5.3 and 2.2.15, `Deno.FsFile.prototype.utime` and `Deno.FsFile.prototype.utimeSync` are not limited by the permission model check `--deny-write=./`. It's possible to change to change the access (`atime`) and modification (`mtime`) times on the file stream resource even when the file is opened with `read` only permission (and `write`: `false`) and file write operations are not allowed (the script is executed with `--deny-write=./`). Similar APIs like `Deno.utime` and `Deno.utimeSync` require `allow-write` permission, however, when a file is opened, even with read only flags and deny-write permission, it's still possible to change the access (`atime`) and modification (`mtime`) times, and thus bypass the permission model. Versions 2.5.3 and 2.2.15 fix the issue. |
| Flowise is a drag & drop user interface to build a customized large language model flow. A file upload vulnerability in version 3.0.7 of FlowiseAI allows authenticated users to upload arbitrary files without proper validation. This enables attackers to persistently store malicious Node.js web shells on the server, potentially leading to Remote Code Execution (RCE). The system fails to validate file extensions, MIME types, or file content during uploads. As a result, malicious scripts such as Node.js-based web shells can be uploaded and stored persistently on the server. These shells expose HTTP endpoints capable of executing arbitrary commands if triggered. The uploaded shell does not automatically execute, but its presence allows future exploitation via administrator error or chained vulnerabilities. This presents a high-severity threat to system integrity and confidentiality. As of time of publication, no known patched versions are available. |
| A vulnerability was identified in Tomofun Furbo 360 and Furbo Mini. Affected by this issue is the function upload_file_to_s3 of the file collect_logs.sh of the component HTTP Traffic Handler. The manipulation leads to improper certificate validation. The attack may be initiated remotely. The attack is considered to have high complexity. The exploitation is known to be difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| In quickjs, in js_print_object, when printing an array, the function first fetches the array length and then loops over it. The issue is, printing a value is not side-effect free. An attacker-defined callback could run during js_print_value, during which the array could get resized and len1 become out of bounds. This results in a use-after-free.A second instance occurs in the same function during printing of a map or set objects. The code iterates over ms->records list, but once again, elements could be removed from the list during js_print_value call. |
