| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in GNU Binutils 2.45. Impacted is the function _bfd_x86_elf_late_size_sections of the file bfd/elfxx-x86.c of the component Linker. The manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is identified as b6ac5a8a5b82f0ae6a4642c8d7149b325f4cc60a. A patch should be applied to remediate this issue. |
| A vulnerability was determined in GNU Binutils 2.45. The affected element is the function elf_x86_64_relocate_section of the file elf64-x86-64.c of the component Linker. This manipulation causes heap-based buffer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. Patch name: 6b21c8b2ecfef5c95142cbc2c32f185cb1c26ab0. To fix this issue, it is recommended to deploy a patch. |
| The Lisfinity Core - Lisfinity Core plugin used for pebas® Lisfinity WordPress theme plugin for WordPress is vulnerable to privilege escalation via password update in all versions up to, and including, 1.4.0. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for authenticated attackers, with Subscriber-level access and above, to change arbitrary user's passwords, including those of administrators. |
| The Cookie Notice & Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the uuid parameter in all versions up to, and including, 1.6.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.3 to 18.3.4, 18.4 to 18.4.2 that, under certain conditions, could have allowed authenticated users with read-only API tokens to perform unauthorized write operations on vulnerability records by exploiting incorrectly scoped GraphQL mutations. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: mp: Fix dual-divider clock rate readback
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: increase scan_ies_len for S1G
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp: Fix incorrect retrival of acp_chip_info
Use dev_get_drvdata(dev->parent) instead of dev_get_platdata(dev)
to correctly obtain acp_chip_info members in the acp I2S driver.
Previously, some members were not updated properly due to incorrect
data access, which could potentially lead to null pointer
dereferences.
This issue was missed in the earlier commit
("ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot"),
which only addressed set_tdm_slot(). This change ensures that all
relevant functions correctly retrieve acp_chip_info, preventing
further null pointer dereference issues. |
| The Search & Go - Directory WordPress Theme theme for WordPress is vulnerable to Authentication Bypass via account takeover in all versions up to, and including, 2.7. This is due to insufficient user validation in the search_and_go_elated_check_facebook_user() function This makes it possible for unauthenticated attackers to gain access to other user's accounts, including administrators, when Facebook login is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: don't fail igc_probe() on LED setup error
When igc_led_setup() fails, igc_probe() fails and triggers kernel panic
in free_netdev() since unregister_netdev() is not called. [1]
This behavior can be tested using fault-injection framework, especially
the failslab feature. [2]
Since LED support is not mandatory, treat LED setup failures as
non-fatal and continue probe with a warning message, consequently
avoiding the kernel panic.
[1]
kernel BUG at net/core/dev.c:12047!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:free_netdev+0x278/0x2b0
[...]
Call Trace:
<TASK>
igc_probe+0x370/0x910
local_pci_probe+0x3a/0x80
pci_device_probe+0xd1/0x200
[...]
[2]
#!/bin/bash -ex
FAILSLAB_PATH=/sys/kernel/debug/failslab/
DEVICE=0000:00:05.0
START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \
| awk '{printf("0x%s", $1)}')
END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100)))
echo $START_ADDR > $FAILSLAB_PATH/require-start
echo $END_ADDR > $FAILSLAB_PATH/require-end
echo 1 > $FAILSLAB_PATH/times
echo 100 > $FAILSLAB_PATH/probability
echo N > $FAILSLAB_PATH/ignore-gfp-wait
echo $DEVICE > /sys/bus/pci/drivers/igc/bind |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Make attach succeed when the device was surprise removed
When a PCI device is removed with surprise hotplug, there may still be
attempts to attach the device to the default domain as part of tear down
via (__iommu_release_dma_ownership()), or because the removal happens
during probe (__iommu_probe_device()). In both cases zpci_register_ioat()
fails with a cc value indicating that the device handle is invalid. This
is because the device is no longer part of the instance as far as the
hypervisor is concerned.
Currently this leads to an error return and s390_iommu_attach_device()
fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail()
because attaching to the default domain must never fail.
With the device fenced by the hypervisor no DMAs to or from memory are
possible and the IOMMU translations have no effect. Proceed as if the
registration was successful and let the hotplug event handling clean up
the device.
This is similar to how devices in the error state are handled since
commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device
is in error state") except that for removal the domain will not be
registered later. This approach was also previously discussed at the
link.
Handle both cases, error state and removal, in a helper which checks if
the error needs to be propagated or ignored. Avoid magic number
condition codes by using the pre-existing, but never used, defines for
PCI load/store condition codes and rename them to reflect that they
apply to all PCI instructions. |
| IBM Aspera 5.0.0 through 5.0.13.1
could disclose sensitive user information from the system to an authenticated user due to an observable discrepancy of returned data. |
| The Popup builder with Gamification, Multi-Step Popups, Page-Level Targeting, and WooCommerce Triggers plugin for WordPress is vulnerable to SQL Injection in all versions up to, and including, 2.1.3. This is due to insufficient escaping on the 'id' parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| A security flaw has been discovered in ChurchCRM up to 5.18.0. This impacts the function AuthMiddleware of the file src/ChurchCRM/Slim/Middleware/AuthMiddleware.php of the component API Endpoint. The manipulation results in missing authentication. The attack can be executed remotely. The exploit has been released to the public and may be exploited. The patch is identified as 3a1cffd2aea63d884025949cfbcfd274d06216a4. A patch should be applied to remediate this issue. |
| Information disclosure may occur while processing the hypervisor log. |
| fastapi-guard is a security library for FastAPI that provides middleware to control IPs, log requests, detect penetration attempts and more. In version 3.0.1, the regular expression patched to mitigate the ReDoS vulnerability by limiting the length of string fails to catch inputs that exceed this limit. This type of patch fails to detect cases in which the string representing the attributes of a <script> tag exceeds 100 characters. As a result, most of the regex patterns present in version 3.0.1 can be bypassed. This is fixed in version 3.0.2. |
| The netty incubator codec.bhttp is a java language binary http parser. In affected versions the `BinaryHttpParser` class does not properly validate input values thus giving attackers almost complete control over the HTTP requests constructed from the parsed output. Attackers can abuse several issues individually to perform various injection attacks including HTTP request smuggling, desync attacks, HTTP header injections, request queue poisoning, caching attacks and Server Side Request Forgery (SSRF). Attacker could also combine several issues to create well-formed messages for other text-based protocols which may result in attacks beyond the HTTP protocol. The BinaryHttpParser class implements the readRequestHead method which performs most of the relevant parsing of the received request. The data structure prefixes values with a variable length integer value. The parsing code below first gets the lengths of the values from the prefixed variable length integer. After it has all of the lengths and calculates all of the indices, the parser casts the applicable slices of the ByteBuf to String. Finally, it passes these values into a new `DefaultBinaryHttpRequest` object where no further parsing or validation occurs. Method is partially validated while other values are not validated at all. Software that relies on netty to apply input validation for binary HTTP data may be vulnerable to various injection and protocol based attacks. This issue has been addressed in version 0.0.13.Final. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability was found in WCMS 11. It has been rated as critical. Affected by this issue is some unknown functionality of the file /index.php?articleadmin/upload/?&CKEditor=container&CKEditorFuncNum=1 of the component Article Publishing Page. The manipulation of the argument Upload leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability classified as problematic has been found in WCMS 11. This affects an unknown part of the file /index.php?anonymous/setregister of the component Registration. The manipulation of the argument Username leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Denial of Service in Forescout SecureConnector 11.1.02.1019 on Windows allows Unprivileged user to corrupt the configuration file and cause Denial of Service in the application. |
