| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't flush non-uploaded STAs
If STA state is pre-moved to AUTHORIZED (such as in IBSS
scenarios) and insertion fails, the station is freed.
In this case, the driver never knew about the station,
so trying to flush it is unexpected and may crash.
Check if the sta was uploaded to the driver before and
fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject mismatching sum of field_len with set key length
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
During the update procedure, when overwrite element in a pre-allocated
htab, the freeing of old_element is protected by the bucket lock. The
reason why the bucket lock is necessary is that the old_element has
already been stashed in htab->extra_elems after alloc_htab_elem()
returns. If freeing the old_element after the bucket lock is unlocked,
the stashed element may be reused by concurrent update procedure and the
freeing of old_element will run concurrently with the reuse of the
old_element. However, the invocation of check_and_free_fields() may
acquire a spin-lock which violates the lockdep rule because its caller
has already held a raw-spin-lock (bucket lock). The following warning
will be reported when such race happens:
BUG: scheduling while atomic: test_progs/676/0x00000003
3 locks held by test_progs/676:
#0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830
#1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500
#2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0
Modules linked in: bpf_testmod(O)
Preemption disabled at:
[<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500
CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11
Tainted: [W]=WARN, [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
__schedule_bug+0x120/0x170
__schedule+0x300c/0x4800
schedule_rtlock+0x37/0x60
rtlock_slowlock_locked+0x6d9/0x54c0
rt_spin_lock+0x168/0x230
hrtimer_cancel_wait_running+0xe9/0x1b0
hrtimer_cancel+0x24/0x30
bpf_timer_delete_work+0x1d/0x40
bpf_timer_cancel_and_free+0x5e/0x80
bpf_obj_free_fields+0x262/0x4a0
check_and_free_fields+0x1d0/0x280
htab_map_update_elem+0x7fc/0x1500
bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43
bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e
bpf_prog_test_run_syscall+0x322/0x830
__sys_bpf+0x135d/0x3ca0
__x64_sys_bpf+0x75/0xb0
x64_sys_call+0x1b5/0xa10
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
</TASK>
It seems feasible to break the reuse and refill of per-cpu extra_elems
into two independent parts: reuse the per-cpu extra_elems with bucket
lock being held and refill the old_element as per-cpu extra_elems after
the bucket lock is unlocked. However, it will make the concurrent
overwrite procedures on the same CPU return unexpected -E2BIG error when
the map is full.
Therefore, the patch fixes the lock problem by breaking the cancelling
of bpf_timer into two steps for PREEMPT_RT:
1) use hrtimer_try_to_cancel() and check its return value
2) if the timer is running, use hrtimer_cancel() through a kworker to
cancel it again
Considering that the current implementation of hrtimer_cancel() will try
to acquire a being held softirq_expiry_lock when the current timer is
running, these steps above are reasonable. However, it also has
downside. When the timer is running, the cancelling of the timer is
delayed when releasing the last map uref. The delay is also fixable
(e.g., break the cancelling of bpf timer into two parts: one part in
locked scope, another one in unlocked scope), it can be revised later if
necessary.
It is a bit hard to decide the right fix tag. One reason is that the
problem depends on PREEMPT_RT which is enabled in v6.12. Considering the
softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced
in v5.15, the bpf_timer commit is used in the fixes tag and an extra
depends-on tag is added to state the dependency on PREEMPT_RT.
Depends-on: v6.12+ with PREEMPT_RT enabled |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: Drop unmanaged ELP metric worker
The ELP worker needs to calculate new metric values for all neighbors
"reachable" over an interface. Some of the used metric sources require
locks which might need to sleep. This sleep is incompatible with the RCU
list iterator used for the recorded neighbors. The initial approach to work
around of this problem was to queue another work item per neighbor and then
run this in a new context.
Even when this solved the RCU vs might_sleep() conflict, it has a major
problems: Nothing was stopping the work item in case it is not needed
anymore - for example because one of the related interfaces was removed or
the batman-adv module was unloaded - resulting in potential invalid memory
accesses.
Directly canceling the metric worker also has various problems:
* cancel_work_sync for a to-be-deactivated interface is called with
rtnl_lock held. But the code in the ELP metric worker also tries to use
rtnl_lock() - which will never return in this case. This also means that
cancel_work_sync would never return because it is waiting for the worker
to finish.
* iterating over the neighbor list for the to-be-deactivated interface is
currently done using the RCU specific methods. Which means that it is
possible to miss items when iterating over it without the associated
spinlock - a behaviour which is acceptable for a periodic metric check
but not for a cleanup routine (which must "stop" all still running
workers)
The better approch is to get rid of the per interface neighbor metric
worker and handle everything in the interface worker. The original problems
are solved by:
* creating a list of neighbors which require new metric information inside
the RCU protected context, gathering the metric according to the new list
outside the RCU protected context
* only use rcu_trylock inside metric gathering code to avoid a deadlock
when the cancel_delayed_work_sync is called in the interface removal code
(which is called with the rtnl_lock held) |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: class: Fix wild pointer dereferences in API class_dev_iter_next()
There are a potential wild pointer dereferences issue regarding APIs
class_dev_iter_(init|next|exit)(), as explained by below typical usage:
// All members of @iter are wild pointers.
struct class_dev_iter iter;
// class_dev_iter_init(@iter, @class, ...) checks parameter @class for
// potential class_to_subsys() error, and it returns void type and does
// not initialize its output parameter @iter, so caller can not detect
// the error and continues to invoke class_dev_iter_next(@iter) even if
// @iter still contains wild pointers.
class_dev_iter_init(&iter, ...);
// Dereference these wild pointers in @iter here once suffer the error.
while (dev = class_dev_iter_next(&iter)) { ... };
// Also dereference these wild pointers here.
class_dev_iter_exit(&iter);
Actually, all callers of these APIs have such usage pattern in kernel tree.
Fix by:
- Initialize output parameter @iter by memset() in class_dev_iter_init()
and give callers prompt by pr_crit() for the error.
- Check if @iter is valid in class_dev_iter_next(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix peer hash locking vs RCU callback
In its address list, afs now retains pointers to and refs on one or more
rxrpc_peer objects. The address list is freed under RCU and at this time,
it puts the refs on those peers.
Now, when an rxrpc_peer object runs out of refs, it gets removed from the
peer hash table and, for that, rxrpc has to take a spinlock. However, it
is now being called from afs's RCU cleanup, which takes place in BH
context - but it is just taking an ordinary spinlock.
The put may also be called from non-BH context, and so there exists the
possibility of deadlock if the BH-based RCU cleanup happens whilst the hash
spinlock is held. This led to the attached lockdep complaint.
Fix this by changing spinlocks of rxnet->peer_hash_lock back to
BH-disabling locks.
================================
WARNING: inconsistent lock state
6.13.0-rc5-build2+ #1223 Tainted: G E
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810babe228 (&rxnet->peer_hash_lock){+.?.}-{3:3}, at: rxrpc_put_peer+0xcb/0x180
{SOFTIRQ-ON-W} state was registered at:
mark_usage+0x164/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_peer_keepalive_worker+0x144/0x440
process_one_work+0x486/0x7c0
process_scheduled_works+0x73/0x90
worker_thread+0x1c8/0x2a0
kthread+0x19b/0x1b0
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
irq event stamp: 972402
hardirqs last enabled at (972402): [<ffffffff8244360e>] _raw_spin_unlock_irqrestore+0x2e/0x50
hardirqs last disabled at (972401): [<ffffffff82443328>] _raw_spin_lock_irqsave+0x18/0x60
softirqs last enabled at (972300): [<ffffffff810ffbbe>] handle_softirqs+0x3ee/0x430
softirqs last disabled at (972313): [<ffffffff810ffc54>] __irq_exit_rcu+0x44/0x110
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rxnet->peer_hash_lock);
<Interrupt>
lock(&rxnet->peer_hash_lock);
*** DEADLOCK ***
1 lock held by swapper/1/0:
#0: ffffffff83576be0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire+0x7/0x30
stack backtrace:
CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G E 6.13.0-rc5-build2+ #1223
Tainted: [E]=UNSIGNED_MODULE
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x57/0x80
print_usage_bug.part.0+0x227/0x240
valid_state+0x53/0x70
mark_lock_irq+0xa5/0x2f0
mark_lock+0xf7/0x170
mark_usage+0xe1/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_put_peer+0xcb/0x180
afs_free_addrlist+0x46/0x90 [kafs]
rcu_do_batch+0x2d2/0x640
rcu_core+0x2f7/0x350
handle_softirqs+0x1ee/0x430
__irq_exit_rcu+0x44/0x110
irq_exit_rcu+0xa/0x30
sysvec_apic_timer_interrupt+0x7f/0xa0
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
net: xdp: Disallow attaching device-bound programs in generic mode
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs: Add missing deinit() call
A warning is triggered when repeatedly connecting and disconnecting the
rnbd:
list_add corruption. prev->next should be next (ffff88800b13e480), but was ffff88801ecd1338. (prev=ffff88801ecd1340).
WARNING: CPU: 1 PID: 36562 at lib/list_debug.c:32 __list_add_valid_or_report+0x7f/0xa0
Workqueue: ib_cm cm_work_handler [ib_cm]
RIP: 0010:__list_add_valid_or_report+0x7f/0xa0
? __list_add_valid_or_report+0x7f/0xa0
ib_register_event_handler+0x65/0x93 [ib_core]
rtrs_srv_ib_dev_init+0x29/0x30 [rtrs_server]
rtrs_ib_dev_find_or_add+0x124/0x1d0 [rtrs_core]
__alloc_path+0x46c/0x680 [rtrs_server]
? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server]
? rcu_is_watching+0xd/0x40
? __mutex_lock+0x312/0xcf0
? get_or_create_srv+0xad/0x310 [rtrs_server]
? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server]
rtrs_rdma_connect+0x23c/0x2d0 [rtrs_server]
? __lock_release+0x1b1/0x2d0
cma_cm_event_handler+0x4a/0x1a0 [rdma_cm]
cma_ib_req_handler+0x3a0/0x7e0 [rdma_cm]
cm_process_work+0x28/0x1a0 [ib_cm]
? _raw_spin_unlock_irq+0x2f/0x50
cm_req_handler+0x618/0xa60 [ib_cm]
cm_work_handler+0x71/0x520 [ib_cm]
Commit 667db86bcbe8 ("RDMA/rtrs: Register ib event handler") introduced a
new element .deinit but never used it at all. Fix it by invoking the
`deinit()` to appropriately unregister the IB event handler. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rcar-ep: Fix incorrect variable used when calling devm_request_mem_region()
The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region()
macro to request a needed resource. A string variable that lives on the
stack is then used to store a dynamically computed resource name, which
is then passed on as one of the macro arguments. This can lead to
undefined behavior.
Depending on the current contents of the memory, the manifestations of
errors may vary. One possible output may be as follows:
$ cat /proc/iomem
30000000-37ffffff :
38000000-3fffffff :
Sometimes, garbage may appear after the colon.
In very rare cases, if no NULL-terminator is found in memory, the system
might crash because the string iterator will overrun which can lead to
access of unmapped memory above the stack.
Thus, fix this by replacing outbound_name with the name of the previously
requested resource. With the changes applied, the output will be as
follows:
$ cat /proc/iomem
30000000-37ffffff : memory2
38000000-3fffffff : memory3
[kwilczynski: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
net: ravb: Fix missing rtnl lock in suspend/resume path
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to ravb_open, ravb_close and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Without this fix, the following warning is triggered:
[ 39.032969] =============================
[ 39.032983] WARNING: suspicious RCU usage
[ 39.033019] -----------------------------
[ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious
rcu_dereference_protected() usage!
...
[ 39.033597] stack backtrace:
[ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted
6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7
[ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on
r9a08g045s33 (DT)
[ 39.033628] Call trace:
[ 39.033633] show_stack+0x14/0x1c (C)
[ 39.033652] dump_stack_lvl+0xb4/0xc4
[ 39.033664] dump_stack+0x14/0x1c
[ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c
[ 39.033682] phy_detach+0x160/0x190
[ 39.033694] phy_disconnect+0x40/0x54
[ 39.033703] ravb_close+0x6c/0x1cc
[ 39.033714] ravb_suspend+0x48/0x120
[ 39.033721] dpm_run_callback+0x4c/0x14c
[ 39.033731] device_suspend+0x11c/0x4dc
[ 39.033740] dpm_suspend+0xdc/0x214
[ 39.033748] dpm_suspend_start+0x48/0x60
[ 39.033758] suspend_devices_and_enter+0x124/0x574
[ 39.033769] pm_suspend+0x1ac/0x274
[ 39.033778] state_store+0x88/0x124
[ 39.033788] kobj_attr_store+0x14/0x24
[ 39.033798] sysfs_kf_write+0x48/0x6c
[ 39.033808] kernfs_fop_write_iter+0x118/0x1a8
[ 39.033817] vfs_write+0x27c/0x378
[ 39.033825] ksys_write+0x64/0xf4
[ 39.033833] __arm64_sys_write+0x18/0x20
[ 39.033841] invoke_syscall+0x44/0x104
[ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4
[ 39.033862] do_el0_svc+0x18/0x20
[ 39.033870] el0_svc+0x3c/0xf0
[ 39.033880] el0t_64_sync_handler+0xc0/0xc4
[ 39.033888] el0t_64_sync+0x154/0x158
[ 39.041274] ravb 11c30000.ethernet eth0: Link is Down |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: clear acl_access/acl_default after releasing them
If getting acl_default fails, acl_access and acl_default will be released
simultaneously. However, acl_access will still retain a pointer pointing
to the released posix_acl, which will trigger a WARNING in
nfs3svc_release_getacl like this:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 26 PID: 3199 at lib/refcount.c:28
refcount_warn_saturate+0xb5/0x170
Modules linked in:
CPU: 26 UID: 0 PID: 3199 Comm: nfsd Not tainted
6.12.0-rc6-00079-g04ae226af01f-dirty #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb5/0x170
Code: cc cc 0f b6 1d b3 20 a5 03 80 fb 01 0f 87 65 48 d8 00 83 e3 01 75
e4 48 c7 c7 c0 3b 9b 85 c6 05 97 20 a5 03 01 e8 fb 3e 30 ff <0f> 0b eb
cd 0f b6 1d 8a3
RSP: 0018:ffffc90008637cd8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83904fde
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88871ed36380
RBP: ffff888158beeb40 R08: 0000000000000001 R09: fffff520010c6f56
R10: ffffc90008637ab7 R11: 0000000000000001 R12: 0000000000000001
R13: ffff888140e77400 R14: ffff888140e77408 R15: ffffffff858b42c0
FS: 0000000000000000(0000) GS:ffff88871ed00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562384d32158 CR3: 000000055cc6a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0xb5/0x170
? __warn+0xa5/0x140
? refcount_warn_saturate+0xb5/0x170
? report_bug+0x1b1/0x1e0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x17/0x40
? asm_exc_invalid_op+0x1a/0x20
? tick_nohz_tick_stopped+0x1e/0x40
? refcount_warn_saturate+0xb5/0x170
? refcount_warn_saturate+0xb5/0x170
nfs3svc_release_getacl+0xc9/0xe0
svc_process_common+0x5db/0xb60
? __pfx_svc_process_common+0x10/0x10
? __rcu_read_unlock+0x69/0xa0
? __pfx_nfsd_dispatch+0x10/0x10
? svc_xprt_received+0xa1/0x120
? xdr_init_decode+0x11d/0x190
svc_process+0x2a7/0x330
svc_handle_xprt+0x69d/0x940
svc_recv+0x180/0x2d0
nfsd+0x168/0x200
? __pfx_nfsd+0x10/0x10
kthread+0x1a2/0x1e0
? kthread+0xf4/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
Clear acl_access/acl_default after posix_acl_release is called to prevent
UAF from being triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix hang in nfsd4_shutdown_callback
If nfs4_client is in courtesy state then there is no point to send
the callback. This causes nfsd4_shutdown_callback to hang since
cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP
notifies NFSD that the connection was dropped.
This patch modifies nfsd4_run_cb_work to skip the RPC call if
nfs4_client is in courtesy state. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Modules linked in:
CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4156 [inline]
netdev_put include/linux/netdevice.h:4173 [inline]
netdev_put include/linux/netdevice.h:4169 [inline]
ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069
__sock_release+0xb0/0x270 net/socket.c:640
sock_close+0x1c/0x30 net/socket.c:1408
...
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
Commit 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit
system") would cause an undefined shift and an out-of-bounds read.
Commit 8bd795fedb84 ("arm64: csum: Fix OoB access in IP checksum code
for negative lengths") fixes the same issue on ARM64. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not allow mmap() of persistent ring buffer
When trying to mmap a trace instance buffer that is attached to
reserve_mem, it would crash:
BUG: unable to handle page fault for address: ffffe97bd00025c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 2862f3067 P4D 2862f3067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI
CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:validate_page_before_insert+0x5/0xb0
Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89
RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246
RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29
RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08
RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000
R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000
FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x1f
? __die+0x2e/0x40
? page_fault_oops+0x157/0x2b0
? search_module_extables+0x53/0x80
? validate_page_before_insert+0x5/0xb0
? kernelmode_fixup_or_oops.isra.0+0x5f/0x70
? __bad_area_nosemaphore+0x16e/0x1b0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x77/0x90
? exc_page_fault+0x22b/0x230
? asm_exc_page_fault+0x2b/0x30
? validate_page_before_insert+0x5/0xb0
? vm_insert_pages+0x151/0x400
__rb_map_vma+0x21f/0x3f0
ring_buffer_map+0x21b/0x2f0
tracing_buffers_mmap+0x70/0xd0
__mmap_region+0x6f0/0xbd0
mmap_region+0x7f/0x130
do_mmap+0x475/0x610
vm_mmap_pgoff+0xf2/0x1d0
ksys_mmap_pgoff+0x166/0x200
__x64_sys_mmap+0x37/0x50
x64_sys_call+0x1670/0x1d70
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reason was that the code that maps the ring buffer pages to user space
has:
page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]);
And uses that in:
vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: use RCU protection in __ip_rt_update_pmtu()
__ip_rt_update_pmtu() must use RCU protection to make
sure the net structure it reads does not disappear. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: use RCU protection in ip6_default_advmss()
ip6_default_advmss() needs rcu protection to make
sure the net structure it reads does not disappear. |
| In the Linux kernel, the following vulnerability has been resolved:
arp: use RCU protection in arp_xmit()
arp_xmit() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF. |
