| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: Fix error path in PTP IRQ setup
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via
set_capacity_and_notify() without checking if it is NULL.
ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only
assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs
(ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE
handler performs no state validation, a user can trigger a NULL pointer
dereference by sending UPDATE_SIZE to a device that has been added but
not yet started, or one that has been stopped.
Fix this by checking ub->ub_disk under ub->mutex before dereferencing
it, and returning -ENODEV if the disk is not available. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
Call rcu_read_lock() before exiting the loop in
try_release_subpage_extent_buffer() because there is a rcu_read_unlock()
call past the loop.
This has been detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis: Fix NULL pointer dereference in adis_init
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Shuffle the tx ring before enabling tx
Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.
According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.
In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:
- Packets already queued in the tx ring are silently lost,
leading to memory leaks since the associated skbs cannot be released.
- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
are reset to '0'.
- The transmission may become stuck on a packet that has already been sent
out, with its 'TX_USED' bit set, but has not yet been processed. However,
due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
`macb_tx_poll()` incorrectly assumes there are no packets to handle
because `queue->tx_head == queue->tx_tail`. This issue is only resolved
when a new packet is placed at this position. This is the root cause of
the prolonged recovery time observed for the NFS root filesystem.
To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm |
| In the Linux kernel, the following vulnerability has been resolved:
net: ncsi: fix skb leak in error paths
Early return paths in NCSI RX and AEN handlers fail to release
the received skb, resulting in a memory leak.
Specifically, ncsi_aen_handler() returns on invalid AEN packets
without consuming the skb. Similarly, ncsi_rcv_rsp() exits early
when failing to resolve the NCSI device, response handler, or
request, leaving the skb unfreed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on probe failures.
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free by using call_rcu() for oplock_info
ksmbd currently frees oplock_info immediately using kfree(), even
though it is accessed under RCU read-side critical sections in places
like opinfo_get() and proc_show_files().
Since there is no RCU grace period delay between nullifying the pointer
and freeing the memory, a reader can still access oplock_info
structure after it has been freed. This can leads to a use-after-free
especially in opinfo_get() where atomic_inc_not_zero() is called on
already freed memory.
Fix this by switching to deferred freeing using call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix PM runtime usage count underflow
Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in
the remove path to properly pair with pm_runtime_use_autosuspend() from
probe. This allows pm_runtime_disable() to handle reference count cleanup
correctly regardless of current suspend state.
The driver calls pm_runtime_put_sync() unconditionally in remove, but the
device may already be suspended due to autosuspend configured in probe.
When autosuspend has already suspended the device, the usage count is 0,
and pm_runtime_put_sync() decrements it to -1.
This causes the following warning on module unload:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
...
vdec 30210000.video-codec: Runtime PM usage count underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Don't log keys in SMB3 signing and encryption key generation
When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and
generate_smb3encryptionkey() log the session, signing, encryption, and
decryption key bytes. Remove the logs to avoid exposing credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Workaround SQM/PSE stalls by disabling sticky
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rga: Fix possible ERR_PTR dereference in rga_buf_init()
rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is
unsupported or invalid. rga_buf_init() does not check the return value
and unconditionally dereferences the pointer when accessing f->size.
Add proper ERR_PTR checking and return the error to prevent
dereferencing an invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove()
In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it
may be NULL:
if (!jdi)
mipi_dsi_detach(dsi);
However, when jdi is NULL, the function does not return and continues by
calling jdi_panel_disable():
err = jdi_panel_disable(&jdi->base);
Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can
lead to a NULL-pointer dereference:
struct jdi_panel *jdi = to_panel_jdi(panel);
backlight_disable(jdi->backlight);
To prevent such a potential NULL-pointer dereference, return early from
jdi_panel_dsi_remove() when jdi is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Set DMA segment size to avoid debug warnings
When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the
kernel occasionally reports a segment size mismatch. This is because
'max_seg_size' is not set. The kernel defaults to 64K. setting
'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()'
from complaining about the over-mapping of the V3D segment length.
DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device
claims to support [len=8290304] [max=65536]
WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388
CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1
Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_dma_map_sg+0x330/0x388
lr : debug_dma_map_sg+0x330/0x388
sp : ffff8000829a3ac0
x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000
x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000
x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002
x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff
x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573
x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000
x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c
x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001
x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280
Call trace:
debug_dma_map_sg+0x330/0x388
__dma_map_sg_attrs+0xc0/0x278
dma_map_sgtable+0x30/0x58
drm_gem_shmem_get_pages_sgt+0xb4/0x140
v3d_bo_create_finish+0x28/0x130 [v3d]
v3d_create_bo_ioctl+0x54/0x180 [v3d]
drm_ioctl_kernel+0xc8/0x140
drm_ioctl+0x2d4/0x4d8 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on file creation due to name hash collision
If we attempt to create several files with names that result in the same
hash, we have to pack them in same dir item and that has a limit inherent
to the leaf size. However if we reach that limit, we trigger a transaction
abort and turns the filesystem into RO mode. This allows for a malicious
user to disrupt a system, without the need to have administration
privileges/capabilities.
Reproducer:
$ cat exploit-hash-collisions.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster and require fewer file
# names that result in hash collision.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# List of names that result in the same crc32c hash for btrfs.
declare -a names=(
'foobar'
'%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC'
'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z'
'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4'
'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:'
'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO'
'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us'
'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY'
'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO'
'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU'
'Ono7avN5GjC:_6dBJ_'
'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am'
'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k'
'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2'
'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd'
'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm'
'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ'
'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky'
'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS'
'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz'
'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu'
'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN'
'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4='
'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn'
'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C'
'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW'
'8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc'
'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC
---truncated--- |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.843 and Application prior to 20.0.1923 (macOS/Linux client deployments) contain an arbitrary file write vulnerability via the response file handling. When tasks produce output the service writes response data into files under /opt/PrinterInstallerClient/tmp/responses/ reusing the requested filename. The service follows symbolic links in the responses directory and writes as the service user (typically root), allowing a local, unprivileged user to cause the service to overwrite or create arbitrary files on the filesystem as root. This can be used to modify configuration files, replace or inject binaries or drivers, and otherwise achieve local privilege escalation and full system compromise. This vulnerability has been identified by the vendor as: V-2023-019 — Arbitrary File Write as Root. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Return queued buffers on start_streaming() failure
Return buffers if streaming fails to start due to uvc_pm_get() error.
This bug may be responsible for a warning I got running
while :; do yavta -c3 /dev/video0; done
on an xHCI controller which failed under this workload.
I had no luck reproducing this warning again to confirm.
xhci_hcd 0000:09:00.0: HC died; cleaning up
usb 13-2: USB disconnect, device number 2
WARNING: CPU: 2 PID: 29386 at drivers/media/common/videobuf2/videobuf2-core.c:1803 vb2_start_streaming+0xac/0x120 |
| In the Linux kernel, the following vulnerability has been resolved:
net: nfc: nci: Fix parameter validation for packet data
Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct). |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer. |
