| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: increase max link count and fix link->enc NULL pointer access
[why]
1.) dc->links[MAX_LINKS] array size smaller than actual requested.
max_connector + max_dpia + 4 virtual = 14.
increase from 12 to 14.
2.) hw_init() access null LINK_ENC for dpia non display_endpoint.
(cherry picked from commit d7f5a61e1b04ed87b008c8d327649d184dc5bb45) |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: validate record offset in hfsplus_bmap_alloc
hfsplus_bmap_alloc can trigger a crash if a
record offset or length is larger than node_size
[ 15.264282] BUG: KASAN: slab-out-of-bounds in hfsplus_bmap_alloc+0x887/0x8b0
[ 15.265192] Read of size 8 at addr ffff8881085ca188 by task test/183
[ 15.265949]
[ 15.266163] CPU: 0 UID: 0 PID: 183 Comm: test Not tainted 6.17.0-rc2-gc17b750b3ad9 #14 PREEMPT(voluntary)
[ 15.266165] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 15.266167] Call Trace:
[ 15.266168] <TASK>
[ 15.266169] dump_stack_lvl+0x53/0x70
[ 15.266173] print_report+0xd0/0x660
[ 15.266181] kasan_report+0xce/0x100
[ 15.266185] hfsplus_bmap_alloc+0x887/0x8b0
[ 15.266208] hfs_btree_inc_height.isra.0+0xd5/0x7c0
[ 15.266217] hfsplus_brec_insert+0x870/0xb00
[ 15.266222] __hfsplus_ext_write_extent+0x428/0x570
[ 15.266225] __hfsplus_ext_cache_extent+0x5e/0x910
[ 15.266227] hfsplus_ext_read_extent+0x1b2/0x200
[ 15.266233] hfsplus_file_extend+0x5a7/0x1000
[ 15.266237] hfsplus_get_block+0x12b/0x8c0
[ 15.266238] __block_write_begin_int+0x36b/0x12c0
[ 15.266251] block_write_begin+0x77/0x110
[ 15.266252] cont_write_begin+0x428/0x720
[ 15.266259] hfsplus_write_begin+0x51/0x100
[ 15.266262] cont_write_begin+0x272/0x720
[ 15.266270] hfsplus_write_begin+0x51/0x100
[ 15.266274] generic_perform_write+0x321/0x750
[ 15.266285] generic_file_write_iter+0xc3/0x310
[ 15.266289] __kernel_write_iter+0x2fd/0x800
[ 15.266296] dump_user_range+0x2ea/0x910
[ 15.266301] elf_core_dump+0x2a94/0x2ed0
[ 15.266320] vfs_coredump+0x1d85/0x45e0
[ 15.266349] get_signal+0x12e3/0x1990
[ 15.266357] arch_do_signal_or_restart+0x89/0x580
[ 15.266362] irqentry_exit_to_user_mode+0xab/0x110
[ 15.266364] asm_exc_page_fault+0x26/0x30
[ 15.266366] RIP: 0033:0x41bd35
[ 15.266367] Code: bc d1 f3 0f 7f 27 f3 0f 7f 6f 10 f3 0f 7f 77 20 f3 0f 7f 7f 30 49 83 c0 0f 49 29 d0 48 8d 7c 17 31 e9 9f 0b 00 00 66 0f ef c0 <f3> 0f 6f 0e f3 0f 6f 56 10 66 0f 74 c1 66 0f d7 d0 49 83 f8f
[ 15.266369] RSP: 002b:00007ffc9e62d078 EFLAGS: 00010283
[ 15.266371] RAX: 00007ffc9e62d100 RBX: 0000000000000000 RCX: 0000000000000000
[ 15.266372] RDX: 00000000000000e0 RSI: 0000000000000000 RDI: 00007ffc9e62d100
[ 15.266373] RBP: 0000400000000040 R08: 00000000000000e0 R09: 0000000000000000
[ 15.266374] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 15.266375] R13: 0000000000000000 R14: 0000000000000000 R15: 0000400000000000
[ 15.266376] </TASK>
When calling hfsplus_bmap_alloc to allocate a free node, this function
first retrieves the bitmap from header node and map node using node->page
together with the offset and length from hfs_brec_lenoff
```
len = hfs_brec_lenoff(node, 2, &off16);
off = off16;
off += node->page_offset;
pagep = node->page + (off >> PAGE_SHIFT);
data = kmap_local_page(*pagep);
```
However, if the retrieved offset or length is invalid(i.e. exceeds
node_size), the code may end up accessing pages outside the allocated
range for this node.
This patch adds proper validation of both offset and length before use,
preventing out-of-bounds page access. Move is_bnode_offset_valid and
check_and_correct_requested_length to hfsplus_fs.h, as they may be
required by other functions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix the deadlock of enetc_mdio_lock
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio
stream while period-elapsed work services its IRQs. As the former
frees the DAI's private context, these two operations shall be
synchronized to avoid slab-use-after-free or worse errors. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: avoid scheduling association deletion twice
When forcefully shutting down a port via the configfs interface,
nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and
then nvmet_disable_port(). Both functions will eventually schedule all
remaining associations for deletion.
The current implementation checks whether an association is about to be
removed, but only after the work item has already been scheduled. As a
result, it is possible for the first scheduled work item to free all
resources, and then for the same work item to be scheduled again for
deletion.
Because the association list is an RCU list, it is not possible to take
a lock and remove the list entry directly, so it cannot be looked up
again. Instead, a flag (terminating) must be used to determine whether
the association is already in the process of being deleted. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: use lock accessing port_state and rport state
nvme_fc_unregister_remote removes the remote port on a lport object at
any point in time when there is no active association. This races with
with the reconnect logic, because nvme_fc_create_association is not
taking a lock to check the port_state and atomically increase the
active count on the rport. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Correctly handle Rx checksum offload errors
The stmmac_rx function would previously set skb->ip_summed to
CHECKSUM_UNNECESSARY if hardware checksum offload (CoE) was enabled
and the packet was of a known IP ethertype.
However, this logic failed to check if the hardware had actually
reported a checksum error. The hardware status, indicating a header or
payload checksum failure, was being ignored at this stage. This could
cause corrupt packets to be passed up the network stack as valid.
This patch corrects the logic by checking the `csum_none` status flag,
which is set when the hardware reports a checksum error. If this flag
is set, skb->ip_summed is now correctly set to CHECKSUM_NONE,
ensuring the kernel's network stack will perform its own validation and
properly handle the corrupt packet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: fix hmm_pfn_to_map_order() usage
Handle the case where the hmm range partially covers a huge page (like
2M), otherwise we can potentially end up doing something nasty like
mapping memory which is outside the range, and maybe not even mapped by
the mm. Fix is based on the xe userptr code, which in a future patch
will directly use gpusvm, so needs alignment here.
v2:
- Add kernel-doc (Matt B)
- s/fls/ilog2/ (Thomas) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate userq buffer virtual address and size
It needs to validate the userq object virtual address to
determine whether it is residented in a valid vm mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: Prevent TOCTOU out-of-bounds write
For the following path not holding the sock lock,
sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump()
make sure not to exceed bounds in case the address list has grown
between buffer allocation (time-of-check) and write (time-of-use). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in smb2_close_cached_fid()
find_or_create_cached_dir() could grab a new reference after kref_put()
had seen the refcount drop to zero but before cfid_list_lock is acquired
in smb2_close_cached_fid(), leading to use-after-free.
Switch to kref_put_lock() so cfid_release() is called with
cfid_list_lock held, closing that gap. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Define actions for the new time_deleg FATTR4 attributes
NFSv4 clients won't send legitimate GETATTR requests for these new
attributes because they are intended to be used only with CB_GETATTR
and SETATTR. But NFSD has to do something besides crashing if it
ever sees a GETATTR request that queries these attributes.
RFC 8881 Section 18.7.3 states:
> The server MUST return a value for each attribute that the client
> requests if the attribute is supported by the server for the
> target file system. If the server does not support a particular
> attribute on the target file system, then it MUST NOT return the
> attribute value and MUST NOT set the attribute bit in the result
> bitmap. The server MUST return an error if it supports an
> attribute on the target but cannot obtain its value. In that case,
> no attribute values will be returned.
Further, RFC 9754 Section 5 states:
> These new attributes are invalid to be used with GETATTR, VERIFY,
> and NVERIFY, and they can only be used with CB_GETATTR and SETATTR
> by a client holding an appropriate delegation.
Thus there does not appear to be a specific server response mandated
by specification. Taking the guidance that querying these attributes
via GETATTR is "invalid", NFSD will return nfserr_inval, failing the
request entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix crash in nfsd4_read_release()
When tracing is enabled, the trace_nfsd_read_done trace point
crashes during the pynfs read.testNoFh test. |
| A malicious actor in Wi-Fi range of the affected product could leverage a vulnerability in the airMAX Wireless Protocol to achieve a remote code execution (RCE) within the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Set fb_display[i]->mode to NULL when the mode is released
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bitblit: bound-check glyph index in bit_putcs*
bit_putcs_aligned()/unaligned() derived the glyph pointer from the
character value masked by 0xff/0x1ff, which may exceed the actual font's
glyph count and read past the end of the built-in font array.
Clamp the index to the actual glyph count before computing the address.
This fixes a global out-of-bounds read reported by syzbot. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential cfid UAF in smb2_query_info_compound
When smb2_query_info_compound() retries, a previously allocated cfid may
have been freed in the first attempt.
Because cfid wasn't reset on replay, later cleanup could act on a stale
pointer, leading to a potential use-after-free.
Reinitialize cfid to NULL under the replay label.
Example trace (trimmed):
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110
[...]
RIP: 0010:refcount_warn_saturate+0x9c/0x110
[...]
Call Trace:
<TASK>
smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? step_into+0x10d/0x690
? __legitimize_path+0x28/0x60
smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? kmem_cache_alloc+0x18a/0x340
? getname_flags+0x46/0x1e0
cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
statfs_by_dentry+0x67/0x90
vfs_statfs+0x16/0xd0
user_statfs+0x54/0xa0
__do_sys_statfs+0x20/0x50
do_syscall_64+0x58/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Sync pending IRQ work before freeing ring buffer
Fix a race where irq_work can be queued in bpf_ringbuf_commit()
but the ring buffer is freed before the work executes.
In the syzbot reproducer, a BPF program attached to sched_switch
triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer
is freed before this work executes, the irq_work thread may accesses
freed memory.
Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work
complete before freeing the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix race in hci_cmd_sync_dequeue_once
hci_cmd_sync_dequeue_once() does lookup and then cancel
the entry under two separate lock sections. Meanwhile,
hci_cmd_sync_work() can also delete the same entry,
leading to double list_del() and "UAF".
Fix this by holding cmd_sync_work_lock across both
lookup and cancel, so that the entry cannot be removed
concurrently. |
