| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
If there's a persistent error in the hypervisor, the SCSI warning for
failed I/O can flood the kernel log and max out CPU utilization,
preventing troubleshooting from the VM side. Ratelimit the warning so
it doesn't DoS the VM. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
This patch addresses a null-ptr-deref in qt2_process_read_urb() due to
an incorrect bounds check in the following:
if (newport > serial->num_ports) {
dev_err(&port->dev,
"%s - port change to invalid port: %i\n",
__func__, newport);
break;
}
The condition doesn't account for the valid range of the serial->port
buffer, which is from 0 to serial->num_ports - 1. When newport is equal
to serial->num_ports, the assignment of "port" in the
following code is out-of-bounds and NULL:
serial_priv->current_port = newport;
port = serial->port[serial_priv->current_port];
The fix checks if newport is greater than or equal to serial->num_ports
indicating it is out-of-bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Assign job pointer to NULL before signaling the fence
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), we introduced a change to assign the job pointer
to NULL after completing a job, indicating job completion.
However, this approach created a race condition between the DRM
scheduler workqueue and the IRQ execution thread. As soon as the fence is
signaled in the IRQ execution thread, a new job starts to be executed.
This results in a race condition where the IRQ execution thread sets the
job pointer to NULL simultaneously as the `run_job()` function assigns
a new job to the pointer.
This race condition can lead to a NULL pointer dereference if the IRQ
execution thread sets the job pointer to NULL after `run_job()` assigns
it to the new job. When the new job completes and the GPU emits an
interrupt, `v3d_irq()` is triggered, potentially causing a crash.
[ 466.310099] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0
[ 466.318928] Mem abort info:
[ 466.321723] ESR = 0x0000000096000005
[ 466.325479] EC = 0x25: DABT (current EL), IL = 32 bits
[ 466.330807] SET = 0, FnV = 0
[ 466.333864] EA = 0, S1PTW = 0
[ 466.337010] FSC = 0x05: level 1 translation fault
[ 466.341900] Data abort info:
[ 466.344783] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 466.350285] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 466.355350] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 466.360677] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000089772000
[ 466.367140] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 466.375875] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 466.382163] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash algif_skcipher af_alg bnep binfmt_misc vc4 snd_soc_hdmi_codec drm_display_helper cec brcmfmac_wcc spidev rpivid_hevc(C) drm_client_lib brcmfmac hci_uart drm_dma_helper pisp_be btbcm brcmutil snd_soc_core aes_ce_blk v4l2_mem2mem bluetooth aes_ce_cipher snd_compress videobuf2_dma_contig ghash_ce cfg80211 gf128mul snd_pcm_dmaengine videobuf2_memops ecdh_generic sha2_ce ecc videobuf2_v4l2 snd_pcm v3d sha256_arm64 rfkill videodev snd_timer sha1_ce libaes gpu_sched snd videobuf2_common sha1_generic drm_shmem_helper mc rp1_pio drm_kms_helper raspberrypi_hwmon spi_bcm2835 gpio_keys i2c_brcmstb rp1 raspberrypi_gpiomem rp1_mailbox rp1_adc nvmem_rmem uio_pdrv_genirq uio i2c_dev drm ledtrig_pattern drm_panel_orientation_quirks backlight fuse dm_mod ip_tables x_tables ipv6
[ 466.458429] CPU: 0 UID: 1000 PID: 2008 Comm: chromium Tainted: G C 6.13.0-v8+ #18
[ 466.467336] Tainted: [C]=CRAP
[ 466.470306] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 466.476157] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 466.483143] pc : v3d_irq+0x118/0x2e0 [v3d]
[ 466.487258] lr : __handle_irq_event_percpu+0x60/0x228
[ 466.492327] sp : ffffffc080003ea0
[ 466.495646] x29: ffffffc080003ea0 x28: ffffff80c0c94200 x27: 0000000000000000
[ 466.502807] x26: ffffffd08dd81d7b x25: ffffff80c0c94200 x24: ffffff8003bdc200
[ 466.509969] x23: 0000000000000001 x22: 00000000000000a7 x21: 0000000000000000
[ 466.517130] x20: ffffff8041bb0000 x19: 0000000000000001 x18: 0000000000000000
[ 466.524291] x17: ffffffafadfb0000 x16: ffffffc080000000 x15: 0000000000000000
[ 466.531452] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 466.538613] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffd08c527eb0
[ 466.545777] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 466.552941] x5 : ffffffd08c4100d0 x4 : ffffffafadfb0000 x3 : ffffffc080003f70
[ 466.560102] x2 : ffffffc0829e8058 x1 : 0000000000000001 x0 : 0000000000000000
[ 466.567263] Call trace:
[ 466.569711] v3d_irq+0x118/0x2e0 [v3d] (P)
[ 466.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: fix serdev race
The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open()
before setting the client ops via serdev_device_set_client_ops(). This
ordering can trigger a NULL pointer dereference in the serdev controller's
receive_buf handler, as it assumes serdev->ops is valid when
SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384ec1
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
devm_serdev_device_open().
Note, serdev_device_set_baudrate() and serdev_device_set_flow_control()
calls should be after the devm_serdev_device_open() call. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_sk_select_reuseport() memory leak
As pointed out in the original comment, lookup in sockmap can return a TCP
ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF
set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb
does not imply a non-refcounted socket.
Drop sk's reference in both error paths.
unreferenced object 0xffff888101911800 (size 2048):
comm "test_progs", pid 44109, jiffies 4297131437
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 9336483b):
__kmalloc_noprof+0x3bf/0x560
__reuseport_alloc+0x1d/0x40
reuseport_alloc+0xca/0x150
reuseport_attach_prog+0x87/0x140
sk_reuseport_attach_bpf+0xc8/0x100
sk_setsockopt+0x1181/0x1990
do_sock_setsockopt+0x12b/0x160
__sys_setsockopt+0x7b/0xc0
__x64_sys_setsockopt+0x1b/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: always recalculate features after XDP clearing, fix null-deref
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues. |
| In the Linux kernel, the following vulnerability has been resolved:
pktgen: Avoid out-of-bounds access in get_imix_entries
Passing a sufficient amount of imix entries leads to invalid access to the
pkt_dev->imix_entries array because of the incorrect boundary check.
UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24
index 20 is out of range for type 'imix_pkt [20]'
CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl lib/dump_stack.c:117
__ubsan_handle_out_of_bounds lib/ubsan.c:429
get_imix_entries net/core/pktgen.c:874
pktgen_if_write net/core/pktgen.c:1063
pde_write fs/proc/inode.c:334
proc_reg_write fs/proc/inode.c:346
vfs_write fs/read_write.c:593
ksys_write fs/read_write.c:644
do_syscall_64 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[ fp: allow to fill the array completely; minor changelog cleanup ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: handle page_pool_dev_alloc_pages error
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Clear port select structure when fail to create
Clear the port select structure on error so no stale values left after
definers are destroyed. That's because the mlx5_lag_destroy_definers()
always try to destroy all lag definers in the tt_map, so in the flow
below lag definers get double-destroyed and cause kernel crash:
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 1
mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 0
mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00
[0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)]
CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
sp : ffff800085fafb00
x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000
x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000
x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000
x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350
x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0
x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c
x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190
x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000
Call trace:
mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core]
mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core]
mlx5_activate_lag+0x60c/0x6f8 [mlx5_core]
mlx5_do_bond_work+0x284/0x5c8 [mlx5_core]
process_one_work+0x170/0x3e0
worker_thread+0x2d8/0x3e0
kthread+0x11c/0x128
ret_from_fork+0x10/0x20
Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400)
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding:
ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xa->xa_lock#24);
local_irq_disable();
lock(&x->lock);
lock(&xa->xa_lock#24);
<Interrupt>
lock(&x->lock);
*** DEADLOCK ***
2 locks held by charon/1337:
#0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90
#1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&x->lock){+.-.}-{3:3} ops: 29 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
IN-SOFTIRQ-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double free of TCP_Server_Info::hostname
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
RIP: 0010:__slab_free+0x223/0x3c0
Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89
1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f>
0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80
RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246
RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068
RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400
RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000
R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500
R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068
FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000)
000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4:
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __reconnect_target_unlocked+0x3e/0x160 [cifs]
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0xce/0x120
? __slab_free+0x223/0x3c0
? do_error_trap+0x65/0x80
? __slab_free+0x223/0x3c0
? exc_invalid_op+0x4e/0x70
? __slab_free+0x223/0x3c0
? asm_exc_invalid_op+0x16/0x20
? __slab_free+0x223/0x3c0
? extract_hostname+0x5c/0xa0 [cifs]
? extract_hostname+0x5c/0xa0 [cifs]
? __kmalloc+0x4b/0x140
__reconnect_target_unlocked+0x3e/0x160 [cifs]
reconnect_dfs_server+0x145/0x430 [cifs]
cifs_handle_standard+0x1ad/0x1d0 [cifs]
cifs_demultiplex_thread+0x592/0x730 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0xdd/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix merge preference rule failure condition
syzbot reported a lock held when returning to userspace[1]. This is
because if argc is less than 0 and the function returns directly, the held
inode lock is not released.
Fix this by store the error in ret and jump to done to clean up instead of
returning directly.
[dh: Modified Lizhi Xu's original patch to make it honour the error code
from afs_split_string()]
[1]
WARNING: lock held when returning to user space!
6.13.0-rc3-syzkaller-00209-g499551201b5f #0 Not tainted
------------------------------------------------
syz-executor133/5823 is leaving the kernel with locks still held!
1 lock held by syz-executor133/5823:
#0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: inode_lock include/linux/fs.h:818 [inline]
#0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: afs_proc_addr_prefs_write+0x2bb/0x14e0 fs/afs/addr_prefs.c:388 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/bpf: return early if transport is not assigned
Some of the core functions can only be called if the transport
has been assigned.
As Michal reported, a socket might have the transport at NULL,
for example after a failed connect(), causing the following trace:
BUG: kernel NULL pointer dereference, address: 00000000000000a0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+
RIP: 0010:vsock_connectible_has_data+0x1f/0x40
Call Trace:
vsock_bpf_recvmsg+0xca/0x5e0
sock_recvmsg+0xb9/0xc0
__sys_recvfrom+0xb3/0x130
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
So we need to check the `vsk->transport` in vsock_bpf_recvmsg(),
especially for connected sockets (stream/seqpacket) as we already
do in __vsock_connectible_recvmsg(). |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: discard packets if the transport changes
If the socket has been de-assigned or assigned to another transport,
we must discard any packets received because they are not expected
and would cause issues when we access vsk->transport.
A possible scenario is described by Hyunwoo Kim in the attached link,
where after a first connect() interrupted by a signal, and a second
connect() failed, we can find `vsk->transport` at NULL, leading to a
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: avoid avoid truncating 64-bit offset to 32 bits
on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a
32-bit position due to folio_next_index() returning an unsigned long.
This could lead to an infinite loop when writing to an xfs filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: prevent null-ptr-deref in vsock_*[has_data|has_space]
Recent reports have shown how we sometimes call vsock_*_has_data()
when a vsock socket has been de-assigned from a transport (see attached
links), but we shouldn't.
Previous commits should have solved the real problems, but we may have
more in the future, so to avoid null-ptr-deref, we can return 0
(no space, no data available) but with a warning.
This way the code should continue to run in a nearly consistent state
and have a warning that allows us to debug future problems. |
| In the Linux kernel, the following vulnerability has been resolved:
filemap: avoid truncating 64-bit offset to 32 bits
On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a
64-bit value to 32 bits, leading to a possible infinite loop when writing
to an xfs filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: virtuser: fix missing lookup table cleanups
When a virtuser device is created via configfs and the probe fails due
to an incorrect lookup table, the table is not removed. This prevents
subsequent probe attempts from succeeding, even if the issue is
corrected, unless the device is released. Additionally, cleanup is also
needed in the less likely case of platform_device_register_full()
failure.
Besides, a consistent memory leak in lookup_table->dev_id was spotted
using kmemleak by toggling the live state between 0 and 1 with a correct
lookup table.
Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the
existing gpio_virtuser_make_lookup_table() and call it from all
necessary points to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid NULL pointer dereference if no valid extent tree
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs]
scrub_simple_mirror+0x175/0x260 [btrfs]
scrub_stripe+0x5d4/0x6c0 [btrfs]
scrub_chunk+0xbb/0x170 [btrfs]
scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs]
btrfs_scrub_dev+0x240/0x600 [btrfs]
btrfs_ioctl+0x1dc8/0x2fa0 [btrfs]
? do_sys_openat2+0xa5/0xf0
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[CAUSE]
The reproducer is using a corrupted image where extent tree root is
corrupted, thus forcing to use "rescue=all,ro" mount option to mount the
image.
Then it triggered a scrub, but since scrub relies on extent tree to find
where the data/metadata extents are, scrub_find_fill_first_stripe()
relies on an non-empty extent root.
But unfortunately scrub_find_fill_first_stripe() doesn't really expect
an NULL pointer for extent root, it use extent_root to grab fs_info and
triggered a NULL pointer dereference.
[FIX]
Add an extra check for a valid extent root at the beginning of
scrub_find_fill_first_stripe().
The new error path is introduced by 42437a6386ff ("btrfs: introduce
mount option rescue=ignorebadroots"), but that's pretty old, and later
commit b979547513ff ("btrfs: scrub: introduce helper to find and fill
sector info for a scrub_stripe") changed how we do scrub.
So for kernels older than 6.6, the fix will need manual backport. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180 |
