Export limit exceeded: 391636 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (391636 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90713 | 1 Vllm-project | 1 Vllm | 2026-09-14 | 3.3 Low |
| A security flaw has been discovered in vllm-project vLLM up to 0.29.0. The affected element is the function TiktokenTokenizer::new of the file rust/src/text/src/backend/hf/mod.rs of the component tiktoken vocab File Handler. The manipulation results in denial of service. The attack is only possible with local access. The exploit has been released to the public and may be used for attacks. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-89474 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: drain usb_work before freeing the charger The USB-PHY notifier queues usb_work, whose handler calls power_supply_changed(bq->charger). The reset devm action only unregisters the notifier and was registered before the power supplies, so devm frees bq->charger on unwind before the action runs; a usb_work still queued can then dereference it. Register the reset action after the power supplies, so it unregisters the notifiers and drains usb_work before the supplies are released. Initialize usb_work and obtain the PHY references before registering the notifiers, so the worker cannot run before the supplies exist. Found by static analysis. | ||||
| CVE-2026-89473 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix power_supply reference leak bq25890_fw_probe() acquires a reference to a secondary charger using power_supply_get_by_name(), but the reference is not released on later probe failures or on driver detach. In particular, failures after bq25890_fw_probe() returns successfully, such as a failure in bq25890_hw_init(), also leak the reference. Register a device-managed cleanup action immediately after acquiring the secondary charger. This releases the reference on all subsequent probe failures and on driver detach. Found by code review. | ||||
| CVE-2026-89471 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cros_usbpd-charger: bound the EC-reported port count cros_usbpd_charger_probe() reads two port counts from the EC and uses one of them, num_charger_ports, as the loop bound when populating a fixed-size array: struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */ ... for (i = 0; i < charger->num_charger_ports; i++) charger->ports[charger->num_registered_psy++] = port; Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports (from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The only validation is a sanity check that compares the two EC-reported values against each other: if (num_charger_ports < num_usbpd_ports || num_charger_ports > num_usbpd_ports + 1) return -EPROTO; It never checks either count against EC_USB_PD_MAX_PORTS, the size of the ports[] array. A malfunctioning, malicious or compromised EC that reports num_usbpd_ports == num_charger_ports == N for any N > 8 (for example both 255) passes this check, and the loop then writes N pointers into the 8-entry ports[] array embedded in the devm_kzalloc()'d charger_data, overflowing it by up to 255 - 8 = 247 entries (~1976 bytes): a slab out-of-bounds write. Reject a port count larger than the ports[] array can hold. | ||||
| CVE-2026-89470 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS Currently the cros_usbpd-charger driver probe iterates based on raw charger port count returned by the embedded controller. The only check is against the number of USB PD ports which the embedded controller also defines. A malicious embedded controller could return an inaccurate port count (up to 255) resulting in an out of bounds write and subsequent memory corruption. Update helper functions in cros_usbpd-charger to limit port counts to EC_USB_PD_MAX_PORTS. | ||||
| CVE-2026-89469 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: lp8727: fix use-after-free in lp8727_release_irq() lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms pchg->work via schedule_delayed_work(). lp8727_release_irq() currently cancels the work before freeing the IRQ, so an IRQ delivered in between can re-arm the work through the threaded handler. After .remove returns the devm layer frees pchg while lp8727_delayed_func() may still run and dereference it. Free the IRQ first so the threaded handler is quiesced and can no longer queue work, then cancel the delayed work to drain the final generation. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89466 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: terminate the strings from firmware The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and leaves the destination without a terminator. Those destinations are model_number, serial_number and oem_info, each BATTMGR_STRING_LEN and declared next to each other. They go out to user space as val->strval, which power_supply_format_property() prints with "%s", so a firmware string that fills the whole field makes that read run into the following members. Use strscpy() so the copy always terminates, the way the SM8350 path already does for the same field. | ||||
| CVE-2026-89465 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: quiesce delayed work before teardown The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself. rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled: rt9455_remove() workqueue cancel pwr_rdy_work cancel max_charging_time_work batt_presence_work queues max_charging_time_work cancel batt_presence_work return devres frees rt9455_info max_charging_time_work dereferences rt9455_info The IRQ also remains registered until devres cleanup and can queue more work after any of the cancellation calls. If rt9455_hw_init() fails after the IRQ has been requested, probe returns without cancelling work that may already have been queued. A pending callback can then access rt9455_info after it has been freed. Register rt9455_cancel_all_delayed_works() through devm_add_action_or_reset() right after devm_power_supply_register(). devres invokes the action in reverse registration order, after the managed IRQ has been freed and before rt9455_info is released, so the delayed works are drained in both rt9455_remove() and the probe error path. Cancel pwr_rdy_work and batt_presence_work before max_charging_time_work because both can queue the latter. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89464 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: twl4030_charger: cancel workers via devm bci is devm-allocated. Two workers (bci->work and bci->current_worker) dereference it. twl4030_bci_remove() disables charging and masks interrupts. It cancels neither worker. A worker pending at remove() can run after devm frees bci. The USB transceiver comes from devm_usb_get_phy_by_node(). devm unregisters its notifier only after remove() returns. A cancel_work_sync() in remove() can then race a notifier reschedule. devm_work_autocancel() and devm_delayed_work_autocancel() avoid that. They cancel the workers during devm release, before bci is freed. The current_worker is registered first, since devm will cancel in reverse order and bci->work can reschedule current_worker. [Move comment about order into the commit message] | ||||
| CVE-2026-89463 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: ucs1002: fix use-after-free on remove ucs1002 has no remove callback, so unbind runs entirely through devm. The alert IRQ handler queues the health_poll delayed work, and the work reschedules itself while the chip reports a bad-health condition. devm frees the alert IRQ, which only synchronizes the handler; it does not cancel the delayed work, which can then run after devm frees the driver data and dereference it. Register health_poll with devm_delayed_work_autocancel() before the alert IRQ is requested. devm then frees the IRQ before cancelling the work, so the handler can no longer queue it and the work is cancelled before the driver data is freed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89461 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: synchronize work cancellation on suspend max17040_work() requeues itself after every poll. cancel_delayed_work() only cancels a pending instance and does not wait for a callback that is already running. If system suspend races with the polling callback, the callback can continue accessing the fuel gauge and requeue itself after the suspend callback returns. Use cancel_delayed_work_sync() to ensure polling is quiesced before suspend completes. | ||||
| CVE-2026-89460 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks The command 'perf stat -e cycles -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the allocation of struct cpu_cf_events at first event initialization. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online create an event for CPUs 0,2-X. Since the events are created with task-context, the scheduler will eventually schedule the program on CPU1. This CPU has not created and initialized any per CPU event infrastructure as that CPU was not online at the time of the perf invocation. Thus when the scheduler runs stress-ng on CPU1, the function cpumf_pmu_add() refers to a NULL pointer: struct cpu_cf_events *cpuhw = this_cpu_cfhw(); This function call is invoked after the task stress-ng has been made runnable on CPU1. And this_cpu_cfhw() returns NULL. The result is a panic: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 .... Krnl PSW : 0404d00180000000 000003ef8291fd0c (cpumf_pmu_add+0x3c/0x80) .... Call Trace: [<000003ef8291fd0c>] cpumf_pmu_add+0x3c/0x80 [<000003ef82bb5e3e>] event_sched_in+0xae/0x190 [<000003ef82bb60d6>] merge_sched_in+0x1b6/0x390 [<000003ef82bb65b8>] visit_groups_merge.constprop.0.isra.0+0x308/0x5b0 [<000003ef82bb689a>] pmu_groups_sched_in+0x3a/0x50 [<000003ef82bb6a30>] ctx_sched_in+0x180/0x260 [<000003ef82bb780c>] perf_event_context_sched_in+0x11c/0x2d0 [<000003ef82bb79ee>] __perf_event_task_sched_in+0x2e/0xc0 [<000003ef82994834>] finish_task_switch.isra.0+0x1a4/0x250 .... Last Breaking-Event-Address: [<000003ef8291f1d8>] this_cpu_cfhw+0x38/0x40 The issue arises only in per-task context when the CPUMF facility is used and the scheduler picks a random CPU for such a process to run on. The scheduler enables the CPUMF infrastructure via PMU callback functions pmu::add() and pmu::del(). Introduce a CPU hotplug prepare/dead callback pair which creates and removes the per CPU counter data while the CPU is offline. Count the users which track every CPU (cpu == -1), that is perf_event_open() events with task context and /dev/hwctr device sessions, in the new counter cpu_cf_root::tskcnt, protected by pmc_reserve_mutex. This ensures the infrastructure is available when new CPU is selected to run the per-task context process. In cpum_cf_free_root() and cpum_cf_free_cpu() ensure the reference pointer to data structures is set to NULL before the data is freed to prevent interrupt handlers to access stale data. [gor@linux.ibm.com: change commit message] | ||||
| CVE-2026-89458 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Do not complete a failed ESE read as successful dasd_int_handler() completes an NRF read of an unallocated ESE track by calling ese_read() and unconditionally marking the request DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has zeroed the destination buffer: a failed sense-data parse or a current track outside the requested range both return early, leaving the destination pages untouched. The request is still completed successfully, so the block layer is handed stale / uninitialized memory instead of zeros. Check the ese_read() return value and fail the request through the normal error path instead of forcing DASD_CQR_SUCCESS. | ||||
| CVE-2026-89457 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Guard sysfs discipline callbacks against unallocated private data Several sysfs show/store handlers call a discipline callback that dereferences device->private, either directly or through the DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline is assigned before check_device() allocates device->private, so an unprivileged read of one of these world-readable attributes in that window dereferences a NULL pointer and panics. Guard the dereference inside each callback that actually touches device->private. | ||||
| CVE-2026-89456 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Propagate partial completion length across ERP recovery dasd_default_erp_postaction() copies the timing and device state from the finished ERP request back to the original request but drops proc_bytes. A request that was partially completed, an ESE read of a not-yet-allocated track returns fewer bytes than requested, and then recovered through the ERP chain loses its partial-completion length. __dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole request instead of requeueing the remainder, silently returning zeroed data for the part that was never read. Carry proc_bytes over to the original request like the other per-request state. | ||||
| CVE-2026-89444 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer set_attribute() populates the security area of the BIOS attribute request buffer with the current admin password via populate_security_buffer(), then dumps the whole request buffer with print_hex_dump_bytes(). This can expose the plaintext admin password in the kernel log. The same issue was fixed for the password attribute path by commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data"). Remove the remaining dump from the BIOS attribute path. | ||||
| CVE-2026-89443 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate level in perf mask ioctls isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the user-provided level as an index into perf_levels[] via _read_pp_level_info() and _read_bf_level_info(), but neither helper validates it first. The adjacent level-info helpers reject levels above max_level before reading the same per-level register block. Add the same bounds checks to the mask helpers, and reject disabled SST-PP levels in isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info(). This prevents out-of-bounds reads from the per-level offset table on invalid ioctl input. | ||||
| CVE-2026-89442 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate socket ID in clos_assoc ioctl isst_if_clos_assoc() validates the user-supplied socket_id with 'socket_id > topology_max_packages()', but isst_common.sst_inst[] is allocated with topology_max_packages() entries, so the valid index range is [0, topology_max_packages()). The '>' comparison lets socket_id == topology_max_packages() pass and index one entry past the array. In addition, isst_common.sst_inst[socket_id] is NULL for an in-range package that has no bound TPMI SST instance, and the pointer is used without a NULL check. Both the out-of-bounds entry and the NULL pointer are then dereferenced by map_partition_power_domain_id() and the following power_domain_info access. Reject socket_id >= topology_max_packages() and a NULL sst_inst, matching the checks already performed by get_instance(). | ||||
| CVE-2026-89440 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: stop card-detect handling on probe failure request_irq() registers the SD card-detect interrupt and the probe enables it before mmc_add_host() runs. If mmc_add_host() fails, the error path only unmaps the registers and returns: the interrupt stays registered, so the handler keeps running against the host once it is freed. via_sdc_isr() dereferences sdhost and its MMIO base and schedules carddet_work, which via_sdc_card_detect() also runs against freed memory through its container_of() dereference. Add a probe-error path that disables and frees the interrupt and cancels carddet_work before unmapping. carddet_work can re-enable the device interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it again after cancelling the work. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-89438 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate logical CPU id and clos id Validate max CLOS ID and logical CPU ID for core power feature. Reject any clos level or logical CPU number greater than the supported maximum. These are used to calculate MMIO offset. | ||||