| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In NLnet Labs Unbound 1.6.2 up to and including 1.25.1, when Unbound is configured with the 'respip' module in front of the validator together with a 'response-ip' redirect rule or an RPZ file with an RPZ-IP trigger, the rewriting handler does not check the security status of the upstream answer and can instead rewrite a BOGUS A/AAAA answer to point to an operator's configured IP. If the validator finds an expired or otherwise invalid RRSIG on an answer whose A record falls within a 'response-ip'/RPZ configuration, the answer is still rewritten and given a hard coded security level of INSECURE. This results in the client receiving an INSECURE NOERROR reply rewritten by the operator's configured IP. A malicious actor can exploit the possible poisonous effect by spoofing a BOGUS A/AAAA answer that falls inside the operator's configured subnet rewrites. Such DNSSEC protected answers are then insecurely redirected to the operator's configured target. |
| In NLnet Labs Unbound 1.15.0 up to and including 1.25.1, the TLS server name used for DNS-over-TLS (DoT) forwarded queries is tied to a struct's ('serviced_query') lifetime but also referenced by another struct ('waiting_tcp'). When the owning struct is jostled out of the mesh while the DoT TCP stream is still handshaking it frees the storage behind the referenced string and if the TLS stream then errors out, it dereferences the freed pointer. The dereference is read-only and the practical impact is a daemon crash resulting in denial of service. A malicious actor that knows a DoT forwarding/stub Unbound's configuration could exploit the vulnerability by quering records in the appropriate zone while keeping Unbound uder pressure so that the jostle logic kicks in. If answers for the vulnerable zone are slow, the likelihood of jostling such queries is higher, although the timing of the jostle needs to be precise. Requirements for a vulnerable Unbound is the existence of a stub/forward zone configured for DoT together with a configured '#authname' suffix on the server identification. The connectivity to the server needs to exhibit a transient failure at the correct time in order to kick off the vulnerable error path. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, a single client query for a deeply nested name under a DNSSEC-signed parent can cause Unbound to send more upstream packets per client query than the configured 'max-global-quota'. This effectively bypasses a security configuration that limits upstream amplification traffic. |
| Vulnerability in the Oracle HRMS (Norway) product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle HRMS (Norway). While the vulnerability is in Oracle HRMS (Norway), attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle HRMS (Norway) accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| In NLnet Labs Unbound 1.6.0 up to and including 1.25.1, a replay of a wildcard rrset as another piece of data, could be briefly considered DNSSEC secure based only on the RRSIG validation and stored into cache, before later validation treats it as bogus based on NSEC validation. When the resolving thread puts secure on the rrset, and another thread that is on the serve expired path then picks up the updated rrset contents with the secure status for a reply, it can be used to change a specific record, next to a wildcard that could be covered by the wildcard, into the wildcard. A malicious actor can exploit the possible poisonous effect by having any DNSSEC-singed domain (irrelevant to the victim domain) and a CNAME wrapper record that points to a record next to a wildcard (that could be covered by the wildcard). Then quering Unbound for the wildcard sibling record would seed the secure message. A later (after expiry) query for the CNAME wrapper would need to resolve the target sibling record. If the wildcard replay is injected into the response, the wildcard rrset will update the expired sibling record with a secure status before completing proper wildcard validation with NSEC records and eventually treating the CNAME wrapper answer as bogus. The updated poisoned rrset is now secure and points to the wildcard. This vulnerability is explicit for the serve expired path and needs injection of the signed wildcard rrset without the NSEC accompanying rrset. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead to denial of service via Exponential Data Expansion (CAPEC-197). An authenticated user may submit a specially crafted query to the ES|QL engine that causes exponential CPU consumption during query evaluation. Because the resource exhaustion persists beyond query completion, repeated requests can fully exhaust the available query worker resources, rendering ES|QL queries unavailable until the node is restarted. |
| In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, insufficient validation of the RRSIG.Labels field combined with premature cache writes during RFC 8198 aggressive NSEC processing leads to cache poisoning that permits a malicious actor controlling a single delegated zone to poison arbitrary sibling zones under NSEC-signed parent domains. A malicious actor with one registered domain under an NSEC-signed TLD can serve malicious insecure DNS responses for unrelated sibling domains (sharing the same parent zone). Arbitrary delegations that do not exist under the parent domain and are covered by the parent's NSEC chain can be brought into insecure existence by fraudulent wildcard DS records (less labels than expected, unknown algorithm) from the malicious sibling domain. This allows the malicious actor to inject insecure wildcard records for those delegations. |
| In NLnet Labs Unbound 1.13.2 up to and including 1.25.1, stub or forward zones where the name is below an intermediate labed below a DNSSEC signed zone could be shadowed by the intermediate label's secure NXDOMAIN answer from the parent. This is caused by an off-by-one error in 'harden-below-nxdomain' logic; enabled by default. It effectively bypasses the configuration and the configured stub/forward zone is never contacted. 'harden-below-nxdomain' does an upward DNS cache walk together with a delegation point guard that does not allow NXDOMAIN synthesis above stub/forward zones. The guard tests the domain name but before stripping a label. This results in an iteration where the domain name equals the configured stub/forward zone apex that passes the guard, strips one more label, and probes the cache at the apex's immediate public parent. If that parent has a cached DNSSEC-secure NXDOMAIN, which it will for any private namespace nested two or more labels under a signed public name, the walk returns it and the configured stub/forward upstream is never contacted. This can only be triggered by the query for the intermediate label (between the stub/forward apex and the DNSSEC parent zone). |
| With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush. |
| In NLnet Labs Unbound 1.16.2 up to and including 1.25.1, a similar vulnerability as with CVE-2026-40622 in the 'ghost domain names' family of attacks was found in Unbound that could extend the ghost domain window by up to one cached TTL configured value for A/AAAA glue records. Similar to other 'ghost domain names' attacks, an adversary needs to control a (ghost) zone and be able to query a vulnerable Unbound. A single client A/AAAA query can cause Unbound to overwrite the cached expired parent-side glue rrset and essentially extend the ghost domain window by up to one cached TTL configured value ('cache-max-ttl'). In configurations where 'harden-referral-path: yes' is used (non-default configuration), no client query is required since Unbound implicitly performs that query. This is a variant of CVE-2026-40622 which only addressed the NS query. |
| A flaw was found in the Ansible Lightspeed Model Context Protocol (MCP) server. This vulnerability, known as path traversal, allows an attacker to manipulate an AI agent through indirect prompt injection. By doing so, the attacker can cause the server to write files to unauthorized locations on the user's system. This can result in the exposure of sensitive host information and enable the attacker to execute malicious commands, potentially leading to a full system compromise. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option. |
| Traefik 3.6.0 through 3.6.22 and 3.7.0 through 3.7.6 fail to enforce the crossProviderNamespaces allowlist for IngressRouteTCP service serversTransport references (the allowlist was only enforced for HTTP serversTransport references). A low-privileged Kubernetes user in a namespace not listed in crossProviderNamespaces can set serversTransport: foo@file on an IngressRouteTCP service, causing Traefik to accept the forbidden cross-provider reference and use a file-provider TCPServersTransport — including privileged backend mTLS client certificates, SPIFFE identity, or PROXY-protocol settings. This is fixed in 3.6.23 and 3.7.7. |
| In Unbound 1.9.0 up to and including 1.25.1, when a DNSCrypt query is received over TCP, the routine that encrypts the reply in place fails to bound the reply length against the destination buffer size. The size clamp that protects the UDP path is not applied on the TCP path, so a reply larger than 65504 bytes is shifted forward by 48 bytes inside a buffer of capacity equal to 'msg-buffer-size', writing past the end of the heap allocation. A single malicious encrypted query crashes the resolver and lead to denial of service. This vulnerability needs Unbound to be compiled with DNSCrypt support ('--enable-dnscrypt') and the 'dnscrypt:' clause to be configured and enabled for the listening interfaces. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, when downstream DNS-over-QUIC (DoQ) is enabled, the first two bidirectional streams on a new QUIC connection (stream_id 0 and 4) bypass the per-stream 'quic-size' gate entirely, and large input buffers are allocated later, after only the 2-byte length prefix has been received from the initial streams. As a result, a remote client can make Unbound exceed the configured 'quic-size' limit with low-cost input. Using only one connection and two streams, each sending a declared 65535-byte length prefix and then holding the streams open, a client can already trivially make Unbound roughly allocate double that amount. This is a remote availability issue / memory-accounting bypass in the downstream DoQ implementation that leads to denial of service for new DoQ clients. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. |
| n8n before 1.123.64, 2.29.8, and 2.30.1 fails to enforce the "Allowed HTTP Request Domains" restriction on HTTP-based credentials (Header Auth, Basic Auth, Query Auth, OAuth) in the GraphQL node, unlike the HTTP Request node. An authenticated user able to create or edit workflows can point the node's endpoint at a server they control and exfiltrate restricted credentials. Only instances where a credential has "Allowed HTTP Request Domains" configured and is usable by non-owner users are affected. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, in DNS-over-QUIC environments, with high concurrency and under pressure, an assertion in libngtcp2 about monotonic timestamps could trigger and result in server termination and thus denial of service. When interfacing with libngtcp2, for DNS-over-QUIC support in Unbound, it is expected to use monotonic time. Unbound was using realtime instead, and in DoQ environments with high concurrency and under pressure, an assert in libngtcp2 for the quic timestamp would trigger and terminate the server.This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. |
| n8n before 2.29.8 and 2.30.x before 2.30.1 does not enforce shell sandbox restrictions on Linux and Windows in the @n8n/computer-use package (sandboxing was applied only on macOS). Shell commands executed by the tool run without any filesystem or network restrictions, allowing unrestricted access to the host filesystem and network from within the computer-use agent process. This issue only affects deployments where the @n8n/computer-use package is explicitly installed and running; standard n8n installations are not affected. |
| The WP Foodbakery plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'delete_locations_backup_file_callback' function in all versions up to, and including, 4.9. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| A vulnerability in the Veeam Updater component of the Veeam Software Appliance that could allow a local user to elevate their privileges and gain root-level access to the underlying operating system. |
