| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Netty is a network application framework for development of protocol servers and clients. NoQuicTokenHandler is the tokenHandler used when the application does not set one. Prior to version 4.2.15.Final, its writeToken() returns false (server will not send Retry — acceptable), but validateToken() unconditionally `return 0`. In QuicheQuicServerCodec.handlePacket(), a non-negative return from validateToken() is interpreted as 'token is valid, ODCID starts at offset 0', causing the server to call quiche_accept as if the client's address had been validated by a Retry round-trip. Per RFC 9000 §8.1, a validated address lifts the 3× anti-amplification send limit. Thus any attacker who includes ANY non-empty token bytes in an Initial packet — with a spoofed victim source IP — causes the Netty server to treat the victim as validated and reflect full-size handshake flights (certificates, etc.) toward it without the 3× cap. The correct 'no token handler' semantics would be to return -1 (invalid) so the normal un-validated path and amplification limit apply. Version 4.2.15.Final patches the issue. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, by combining Buffer.call.call({}.__lookupGetter__, Buffer, "__proto__"), Buffer.call.call({}.__lookupSetter__, Buffer, "__proto__"), and Node.js's ERR_INVALID_ARG_TYPE Error, the host's TypeError constructor can be obtained, which allows the escape from the sandbox. This allows attackers to run arbitrary code. This issue has been patched in version 3.11.4. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, Symbol.for override in setup-sandbox.js only intercepts 2 of 9 dangerous Node.js cross-realm symbols. Combined with the bridge's set/defineProperty/deleteProperty traps having no isDangerousCrossRealmSymbol key check, sandbox code can obtain real cross-realm symbols, write them to host objects, and control host-side behavior — verified with a full util.promisify hijack chain. This issue has been patched in version 3.11.4. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, VM2 suffers from a sandbox breakout vulnerability. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This issue has been patched in version 3.11.4. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, NodeVM exposes some process-wide observability builtins when they are allowed through require.builtin. The diagnostics_channel, async_hooks, and perf_hooks builtins are not blocked by the dangerous builtin denylist. These modules are process-wide, not sandbox-local. Sandboxed code can use them to observe host application data across the vm2 boundary. This issue has been patched in version 3.11.4. |
| Frappe is a full-stack web application framework. Prior to versions 15.106.0 and 16.16.0, there is a possible SQL Injection via get_blog_list. This issue has been patched in versions 15.106.0 and 16.16.0. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, DefaultHttp2Connection.DefaultEndpoint initialises maxActiveStreams/maxStreams to Integer.MAX_VALUE, and Http2Settings never inserts SETTINGS_MAX_CONCURRENT_STREAMS by default (Http2Settings.java:305-307 only clamps a user-supplied value). Unless the application explicitly calls initialSettings().maxConcurrentStreams(n), a Netty HTTP/2 server advertises no limit and enforces none locally. Each open stream allocates a DefaultStream object, PropertyMap slots, flow-controller state and IntObjectHashMap entry; with ~2^30 permissible odd stream IDs a single TCP connection can create hundreds of thousands of long-lived stream objects. This is also the precondition for CVE-2023-44487-style Rapid-Reset amplification, where the absence of a low concurrent cap multiplies backend work. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Nuxt is an open-source web development framework for Vue.js. In Nuxt versions 3.11.0 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6 and @nuxt/nitro-server versions 3.20.0 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6, when experimental.componentIslands is enabled (default in Nuxt 4), any .server.vue file under pages/ is automatically registered as a server island under the key page_<routeName> and exposed via the /__nuxt_island/:name endpoint. Until this fix, requests through that endpoint rendered the page component directly via the SSR renderer without instantiating Vue Router, which meant route middleware declared on the page (including definePageMeta({ middleware })) did not run. This issue has been patched in versions 3.21.6 and 4.4.6. |
| Nuxt is an open-source web development framework for Vue.js. From versions 3.11.0 to before 3.21.7 and 4.0.0 to before 4.4.7, there is a route-rule middleware bypass via case-sensitivity mismatch between vue-router and the routeRules matcher. This issue has been patched in versions 3.21.7 and 4.4.7. |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.4, the BaseHandler.set trap in bridge.js (line 1231) ignores the receiver parameter and unconditionally writes to the host target object. Per the Proxy set trap specification, when receiver !== proxy (e.g., when a child object inherits from the proxy via Object.create), the property assignment should create an own property on the receiver, not on the proxy target. The current implementation always calls otherReflectSet(object, key, value) against the host target, causing all inherited property writes to leak through to the host object. This bug provides an alternative attack vector for writing dangerous cross-realm Symbol keys (e.g., nodejs.util.promisify.custom) to host objects, bypassing any future per-trap isDangerousCrossRealmSymbol guard on the direct set path. This issue has been patched in version 3.11.4. |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 6). The affected application does not properly sanitize path input in the `GET /api/sftp/uploadFiles` endpoint used for directory listing. This allows path traversal through crafted input, enabling access to unintended file system locations. |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 6). The affected system includes a binary that is configured with the cap_dac_override capability. This capability allows the process to bypass file system permission checks, resulting in unrestricted file system access. This could allow a local attacker to escalate privileges leading to arbitrary file modification and gaining root privileges on the system. |
| Format Plugins versions 1.1.2 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| jmespath.php allows users to use JMESPath, software for declaratively specifying how to extract elements from a JSON document, in PHP applications with PHP data structures. Versions prior to 2.9.1 can generate and execute attacker-controlled PHP code when `JmesPath\CompilerRuntime` is used with an attacker-controlled JMESPath expression. The compiler emits parsed JMESPath function names into generated PHP source without sufficient escaping. A crafted expression can cause the generated cache file to contain executable attacker-controlled PHP, which is then loaded by the compiler runtime. The issue is patched in `2.9.1` and later. As a workaround, disable `JP_PHP_COMPILE` and do not use `JmesPath\CompilerRuntime` with attacker-controlled expressions. Use the default `AstRuntime` for untrusted expressions. Applications that must continue accepting untrusted JMESPath expressions before upgrading should ensure those expressions are never evaluated by the compiler runtime. |
| A JNDI Injection vulnerability has been discovered in Apache CXF's JCA integration module, which can allow for code execution, if an attacker is able to manipulate the JCA deployment descriptor (ra.xml) or runtime activation parameters. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue. |
| A further incomplete fix for a previous advisory CVE-2026-44417 (Untrusted JMS configuration can lead to RCE) for Apache CXF has been identified, which can allow code execution capabilities, if untrusted users are allowed to configure JMS for Apache CXF. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue. |
| The 'clientId' parameter from incoming HTTP requests is directly concatenated into OAuth2 server log warning messages without sanitizing control characters. This allows an attacker to inject arbitrary content, including fake log entries, into the server's log files. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue. |
| ClipBucket v5 is an open source video sharing platform. Prior to version 5.5.3 - #141, ClipBucket v5 contains an improper neutralization of SQL wildcard characters in the subtitle editing endpoint. An authenticated user can send a % character as the number parameter to overwrite all subtitle titles of any video they own in a single HTTP request. This issue has been patched in version 5.5.3 - #141. |
| Quest Bot is an opensource modern Discord Bot built for moderation, utilities and support. Prior to version 1.0.3, a normal user can create a ticket with a reason containing @everyone, @here, user mentions, or role mentions. When the ticket is created, the bot posts the attacker-controlled reason into the new ticket channel without suppressing mentions. If the bot has permission to use those mentions, the attacker can make the bot ping staff or everyone with access to the ticket channel. This issue has been patched in version 1.0.3. |
