| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix deadlock with check operation and nowait requests
When an array check is running it will raise the barrier at which point
normal requests will become blocked and increment the nr_pending value to
signal there is work pending inside of wait_barrier(). NOWAIT requests
do not block and so will return immediately with an error, and additionally
do not increment nr_pending in wait_barrier(). Upstream change commit
43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a
call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit
this condition. raid_end_bio_io() eventually calls allow_barrier() and
it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even
though the corresponding increment on nr_pending didn't happen in the
NOWAIT case.
This can be easily seen by starting a check operation while an application
is doing nowait IO on the same array. This results in a deadlocked state
due to nr_pending value underflowing and so the md resync thread gets stuck
waiting for nr_pending to == 0.
Output of r10conf state of the array when we hit this condition:
crash> struct r10conf
barrier = 1,
nr_pending = {
counter = -41
},
nr_waiting = 15,
nr_queued = 0,
Example of md_sync thread stuck waiting on raise_barrier() and other
requests stuck in wait_barrier():
md1_resync
[<0>] raise_barrier+0xce/0x1c0
[<0>] raid10_sync_request+0x1ca/0x1ed0
[<0>] md_do_sync+0x779/0x1110
[<0>] md_thread+0x90/0x160
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
kworker/u1040:2+flush-253:4
[<0>] wait_barrier+0x1de/0x220
[<0>] regular_request_wait+0x30/0x180
[<0>] raid10_make_request+0x261/0x1000
[<0>] md_handle_request+0x13b/0x230
[<0>] __submit_bio+0x107/0x1f0
[<0>] submit_bio_noacct_nocheck+0x16f/0x390
[<0>] ext4_io_submit+0x24/0x40
[<0>] ext4_do_writepages+0x254/0xc80
[<0>] ext4_writepages+0x84/0x120
[<0>] do_writepages+0x7a/0x260
[<0>] __writeback_single_inode+0x3d/0x300
[<0>] writeback_sb_inodes+0x1dd/0x470
[<0>] __writeback_inodes_wb+0x4c/0xe0
[<0>] wb_writeback+0x18b/0x2d0
[<0>] wb_workfn+0x2a1/0x400
[<0>] process_one_work+0x149/0x330
[<0>] worker_thread+0x2d2/0x410
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix MR cleanup on copy error
__rds_rdma_map() hands sg/pages ownership to the transport after
get_mr() succeeds. If copying the generated cookie back to user space
fails after that point, the error path must not free those resources
again before dropping the MR reference.
Remove the duplicate unpin/free from the put_user() failure branch so
that MR teardown is handled only through the existing final cleanup
path. |
| When processing a request with a URL path starting with /status or /sysinfo, WOSHttpStatusModule.dll is to be loaded to handle such URL patterns. The WOSBin_LoadHttpModule function in the dll would be called to set up a "module" object for that module. However, WOSHttpStatusModule.dll is not present in the installation. As a result, a function pointer to WOSBin_LoadHttpModule (which would have been in the export table in WOSHttpStatusModule.dll) is set to NULL, resulting in calling a function at address 0. |
| Function calls to WOSCommonUtil.dll!WOSSysInfoGetDeviceInterface() in various DLLs (i.e., WOSProfileMgrModule.dll, WOSWebDavModule.dll) can return a NULL pointer (i.e., when no user is logged into the Triofox Server Agent Management Console). The returned NULL pointer is not checked before being dereferenced. |
| Gladinet Triofox Cloud Server Agent Access Service (GladServerAgentService.exe) listens on TCP port 7878 and processes remote HTTP messages with URL paths starting with /resources, /status, /sysinfo, /woshome, /Settings, /schedule, or /DavCache. |
| A stack-based buffer overflow condition exists in WOSDeviceDropFolder.dll when processing a long URL path starting with /resources: |
| A path traversal vulnerability exists in WOSDefaultHttpModule.dll when processing a URL path starting with /woshome |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, a crafted UUID such as $(id>/tmp/rce) in the config causes root RCE when pamusb-conf --reset-pads is run. A USB device with a crafted filesystem UUID (some controllers allow this) can inject the payload at --add-device time. Also, userName from the XML config is passed to os.system() in pamusb-agent, which invokes a shell. This vulnerability is fixed in 0.8.7. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, pamusb-pinentry reads the PINENTRY_FALLBACK_APP environment variable and executes it directly without any validation. Any process that can set environment variables before pamusb-pinentry is invoked can point PINENTRY_FALLBACK_APP at an arbitrary binary or script and have it executed with the privileges of the pam_usb tool chain. This vulnerability is fixed in 0.8.7. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, src/device.c passed the return values of udisks_drive_get_serial(), udisks_drive_get_vendor(), and udisks_drive_get_model() directly to strcmp() without NULL checks. The GIO/UDisks API documentation states these accessors can return NULL for devices that do not expose the corresponding field. Passing NULL to strcmp() is undefined behaviour (typically a SIGSEGV). This vulnerability is fixed in 0.8.7. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, symlink attacks on pad directory and pad files enable authentication bypass and root file corruption. This vulnerability is fixed in 0.8.7. |
| ROHC protocol dissector crash in Wireshark 4.6.0 to 4.6.5 and 4.4.0 to 4.4.15 allows denial of service |
| In OpenStack Swift before 2.36.2 and 2.37.2, s3api middleware enters an infinite loop when processing a truncated aws-chunked PUT request body. The StreamingInput class repeatedly appends an empty buffer and re-reads, causing the proxy-server worker handling the request to become permanently unresponsive with increasing CPU and memory consumption. An authenticated attacker can systematically exhaust all proxy-server workers, resulting in denial of service. The defect was introduced in Swift 2.36.0. |
| Budibase is an open-source low-code platform. Prior to 3.39.0, the single-datasource GET and PUT routes are guarded by generic TABLE READ, not by Builder/Admin permission or datasource-specific ownership/resource checks. The built-in Basic app user role maps to the WRITE permission set, which includes table read/write and query write. A Basic user can therefore read an existing REST datasource, receive redacted authConfigs values, submit an update that changes only config.url while keeping the redacted placeholders, and trigger an existing saved relative-path REST query. During update, mergeConfigs() restores the old stored secret when it sees the redaction placeholder. During query execution, Budibase prefixes the attacker-controlled datasource config.url to the relative query path and applies the resolved stored auth headers. The result is server-side disclosure of the builder-configured REST Authorization secret to an attacker-controlled listener. This vulnerability is fixed in 3.39.0. |
| Budibase is an open-source low-code platform. Prior to 3.34.8, the processUrlFile function in packages/server/src/automations/steps/ai/extract.ts uses fetch(fileUrl) directly without the IP blacklist validation that is consistently applied to all other automation steps. This allows an authenticated user to trigger server-side requests to internal network addresses. This vulnerability is fixed in 3.34.8. |
| A misconfigured Content Security Policy (CSP) in HCL BigFix Remote Control Server WebUI (versions 10.1.0.0442 and earlier) fails to define directives without fallbacks, allowing attackers to bypass intended security restrictions and load unauthorized resources. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: Fix race between m2m job_abort and device_run
Fix kernel panic caused by race condition where v4l2_m2m_ctx_release()
frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run
with the same context.
Race sequence:
v4l2_m2m_try_run(): v4l2_m2m_ctx_release():
lock/unlock v4l2_m2m_cancel_job()
job_abort()
v4l2_m2m_job_finish()
kfree(m2m_ctx) <- frees ctx
device_run() <- use-after-free crash at 0x538
Crash trace:
Unable to handle kernel read from unreadable memory at virtual address
0000000000000538
v4l2_m2m_try_run+0x78/0x138
v4l2_m2m_device_run_work+0x14/0x20
The amphion vpu driver does not rely on the m2m framework's device_run
callback to perform encode/decode operations.
Fix the race by preventing m2m framework job scheduling entirely:
- Add job_ready callback returning 0 (no jobs ready for m2m framework)
- Remove job_abort callback to avoid the race condition |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix IRQ cleanup on 6xxx probe failure
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
Commit f76d4c28a46a ("fs/jbd2: use sleeping version of
__find_get_block()") changed jbd2_journal_cancel_revoke() to use
__find_get_block_nonatomic() which holds the folio lock instead of
i_private_lock. This breaks the lock ordering (folio -> buffer) and
causes an ABBA deadlock when the filesystem blocksize < pagesize:
T1 T2
ext4_mkdir()
ext4_init_new_dir()
ext4_append()
ext4_getblk()
lock_buffer() <- A
sync_blockdev()
blkdev_writepages()
writeback_iter()
writeback_get_folio()
folio_lock() <- B
ext4_journal_get_create_access()
jbd2_journal_cancel_revoke()
__find_get_block_nonatomic()
folio_lock() <- B
block_write_full_folio()
lock_buffer() <- A
This can occasionally cause generic/013 to hang.
Fix by only calling __find_get_block_nonatomic() when the passed
buffer_head doesn't belong to the bdev, which is the only case that we
need to look up its bdev alias. Otherwise, the lookup is redundant since
the found buffer_head is equal to the one we passed in. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix integer overflow in run_unpack() volume boundary check
The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw
addition which can wrap around for large lcn and len values, bypassing
the validation. Use check_add_overflow() as is already done for the
adjacent prev_lcn + dlcn and vcn64 + len checks added by commit
3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()").
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
