| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak
btrfs_ioctl_space_info() has a TOCTOU race between two passes over the
block group RAID type lists. The first pass counts entries to determine
the allocation size, then the second pass fills the buffer. The
groups_sem rwlock is released between passes, allowing concurrent block
group removal to reduce the entry count.
When the second pass fills fewer entries than the first pass counted,
copy_to_user() copies the full alloc_size bytes including trailing
uninitialized kmalloc bytes to userspace.
Fix by copying only total_spaces entries (the actually-filled count from
the second pass) instead of alloc_size bytes, and switch to kzalloc so
any future copy size mismatch cannot leak heap data. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely". |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger
Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll(). |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and
readl(crtc_reg) will access with random address, because the "device" is
from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong
when my platform inserts a discrete GPU:
lspci -tv
-[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller
...
+-06.0 Loongson Technology LLC LG100 GPU
+-06.2 Loongson Technology LLC Device 7a37
...
Add a default switch case to fix the panic as below:
Kernel ade access[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4
pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0
a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002
a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001
t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000
t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0
t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8
s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000
s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000
ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210
ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1)
BADV: 7fffffffffffff00
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007
0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff
900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08
0000000000000000 0000000000000000 0000000000000006 90000001002fb778
90000001000530b8 90000000027af000 0000000000000000 9000000100054000
9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001
90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000
0000000000000006 90000000027af000 0000000000000030 90000000027af000
900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560
7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030
...
Call Trace:
[<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210
[<9000000000eebc08>] pci_fixup_device+0x108/0x280
[<9000000000ebb70c>] pci_setup_device+0x24c/0x690
[<9000000000ebc560>] pci_scan_single_device+0xe0/0x140
[<9000000000ebc684>] pci_scan_slot+0xc4/0x280
[<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0
[<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420
[<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440
[<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0
[<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<9000000000f5211c>] acpi_bus_scan+0x6c/0x280
[<900000000189c028>] acpi_scan_init+0x194/0x310
[<900000000189bc6c>] acpi_init+0xcc/0x140
[<9000000000220cdc>] do_one_initcall+0x4c/0x310
[<90000000018618fc>] kernel_init_freeable+0x258/0x2d4
[<900000000184326c>] kernel_init+0x28/0x13c
[<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix out-of-bounds read in smb2_compound_op()
If a server sends a truncated response but a large OutputBufferLength, and
terminates the EA list early, check_wsl_eas() returns success without
validating that the entire OutputBufferLength fits within iov_len.
Then smb2_compound_op() does:
memcpy(idata->wsl.eas, data[0], size[0]);
Where size[0] is OutputBufferLength. If iov_len is smaller than size[0],
memcpy can read beyond the end of the rsp_iov allocation and leak adjacent
kernel heap memory. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring
scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs.
If the loaded scheduler is disabled and freed (via RCU work) and another is
enabled between the naked load and the rwsem acquire, the reader sees
scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one
- UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...).
scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write
(scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section
correlates @sch with the enabled snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
8021q: delete cleared egress QoS mappings
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop stray 'static' from fast-RX rx_result
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix false positive on permission events
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: control built-in cs manually
The coreQSPI IP supports only a single chip select, which is
automagically operated by the hardware - set low when the transmit
buffer first gets written to and set high when the number of bytes
written to the TOTALBYTES field of the FRAMES register have been sent on
the bus. Additional devices must use GPIOs for their chip selects.
It was reported to me that if there are two devices attached to this
QSPI controller that the in-built chip select is set low while linux
tries to access the device attached to the GPIO.
This went undetected as the boards that connected multiple devices to
the SPI controller all exclusively used GPIOs for chip selects, not
relying on the built-in chip select at all. It turns out that this was
because the built-in chip select, when controlled automagically, is set
low when active and high when inactive, thereby ruling out its use for
active-high devices or devices that need to transmit with the chip
select disabled.
Modify the driver so that it controls chip select directly, retaining
the behaviour for mem_ops of setting the chip select active for the
entire duration of the transfer in the exec_op callback. For regular
transfers, implement the set_cs callback for the core to use.
As part of this, the existing setup callback, mchp_coreqspi_setup_op(),
is removed. Modifying the CLKIDLE field is not safe to do during
operation when there are multiple devices, so this code is removed
entirely. Setting the MASTER and ENABLE fields is something that can be
done once at probe, it doesn't need to be re-run for each device.
Instead the new setup callback sets the built-in chip select to its
inactive state for active-low devices, as the reset value of the chip
select in software controlled mode is low. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Validate rx_hash_key_len
Sashiko points out that rx_hash_key_len comes from a uAPI structure and is
blindly passed to memcpy, allowing the userspace to trash kernel
memory. Bounds check it so the memcpy cannot overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opens
As prepare can be called mulitple times, this can result in multiple
graph opens for playback path.
This will result in a memory leaks, fix this by adding a check before
opening. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix VF illegal register access
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/xive: fix kmemleak caused by incorrect chip_data lookup
The kmemleak reports the following memory leak:
Unreferenced object 0xc0000002a7fbc640 (size 64):
comm "kworker/8:1", pid 540, jiffies 4294937872
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 09 04 00 04 00 00 ................
00 00 a7 81 00 00 0a c0 00 00 08 04 00 04 00 00 ................
backtrace (crc 177d48f6):
__kmalloc_cache_noprof+0x520/0x730
xive_irq_alloc_data.constprop.0+0x40/0xe0
xive_irq_domain_alloc+0xd0/0x1b0
irq_domain_alloc_irqs_parent+0x44/0x6c
pseries_irq_domain_alloc+0x1cc/0x354
irq_domain_alloc_irqs_parent+0x44/0x6c
msi_domain_alloc+0xb0/0x220
irq_domain_alloc_irqs_locked+0x138/0x4d0
__irq_domain_alloc_irqs+0x8c/0xfc
__msi_domain_alloc_irqs+0x214/0x4d8
msi_domain_alloc_irqs_all_locked+0x70/0xf8
pci_msi_setup_msi_irqs+0x60/0x78
__pci_enable_msix_range+0x54c/0x98c
pci_alloc_irq_vectors_affinity+0x16c/0x1d4
nvme_pci_enable+0xac/0x9c0 [nvme]
nvme_probe+0x340/0x764 [nvme]
This occurs when allocating MSI-X vectors for an NVMe device. During
allocation the XIVE code creates a struct xive_irq_data and stores it
in irq_data->chip_data.
When the MSI-X irqdomain is later freed, xive_irq_free_data() is
responsible for retrieving this structure and freeing it. However,
after commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child
interrupt controller drivers"), xive_irq_free_data() retrieves the
chip_data using irq_get_chip_data(), which looks up the data through
the child domain.
This is incorrect because the XIVE-specific irq data is associated with
the XIVE (parent) domain. As a result the lookup fails and the allocated
struct xive_irq_data is never freed, leading to the kmemleak report
shown above.
Fix this by retrieving the irq_data from the correct domain using
irq_domain_get_irq_data() and then accessing the chip_data via
irq_data_get_irq_chip_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them. |
