| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mtk-pmic-keys - fix possible null pointer dereference
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo
Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case
pattern_len is equal to zero and the device FIFO is not empty. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_tagged_fifo
Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in
case pattern_len is equal to zero and the device FIFO is not empty. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: opt3001: fix deadlock due to concurrent flag access
The threaded IRQ function in this driver is reading the flag twice: once to
lock a mutex and once to unlock it. Even though the code setting the flag
is designed to prevent it, there are subtle cases where the flag could be
true at the mutex_lock stage and false at the mutex_unlock stage. This
results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the
flag into a variable and using the variable value at both stages. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: displayport: Fix deadlock
This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock
functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector
mutex is only locked if a connection is established and the partner pointer
is valid. This resolves a deadlock scenario where
ucsi_displayport_remove_partner holds con->mutex waiting for
dp_altmode_work to complete while dp_altmode_work attempts to acquire it. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Eliminate window where TLB flushes may be inadvertently skipped
tl;dr: There is a window in the mm switching code where the new CR3 is
set and the CPU should be getting TLB flushes for the new mm. But
should_flush_tlb() has a bug and suppresses the flush. Fix it by
widening the window where should_flush_tlb() sends an IPI.
Long Version:
=== History ===
There were a few things leading up to this.
First, updating mm_cpumask() was observed to be too expensive, so it was
made lazier. But being lazy caused too many unnecessary IPIs to CPUs
due to the now-lazy mm_cpumask(). So code was added to cull
mm_cpumask() periodically[2]. But that culling was a bit too aggressive
and skipped sending TLB flushes to CPUs that need them. So here we are
again.
=== Problem ===
The too-aggressive code in should_flush_tlb() strikes in this window:
// Turn on IPIs for this CPU/mm combination, but only
// if should_flush_tlb() agrees:
cpumask_set_cpu(cpu, mm_cpumask(next));
next_tlb_gen = atomic64_read(&next->context.tlb_gen);
choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
load_new_mm_cr3(need_flush);
// ^ After 'need_flush' is set to false, IPIs *MUST*
// be sent to this CPU and not be ignored.
this_cpu_write(cpu_tlbstate.loaded_mm, next);
// ^ Not until this point does should_flush_tlb()
// become true!
should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3()
and writing to 'loaded_mm', which is a window where they should not be
suppressed. Whoops.
=== Solution ===
Thankfully, the fuzzy "just about to write CR3" window is already marked
with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in
should_flush_tlb() is sufficient to ensure that the CPU is targeted with
an IPI.
This will cause more TLB flush IPIs. But the window is relatively small
and I do not expect this to cause any kind of measurable performance
impact.
Update the comment where LOADED_MM_SWITCHING is written since it grew
yet another user.
Peter Z also raised a concern that should_flush_tlb() might not observe
'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off()
writes them. Add a barrier to ensure that they are observed in the
order they are written. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users
Support for eBPF programs loaded by unprivileged users is typically
disabled. This means only cBPF programs need to be mitigated for BHB.
In addition, only mitigate cBPF programs that were loaded by an
unprivileged user. Privileged users can also load the same program
via eBPF, making the mitigation pointless. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix memory leak in parse_lease_state()
The previous patch that added bounds check for create lease context
introduced a memory leak. When the bounds check fails, the function
returns NULL without freeing the previously allocated lease_ctx_info
structure.
This patch fixes the issue by adding kfree(lreq) before returning NULL
in both boundary check cases. |
| In the Linux kernel, the following vulnerability has been resolved:
sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()
When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the
child qdisc's peek() operation before incrementing sch->q.qlen and
sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may
trigger an immediate dequeue and potential packet drop. In such cases,
qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog
have not yet been updated, leading to inconsistent queue accounting. This
can leave an empty HFSC class in the active list, causing further
consequences like use-after-free.
This patch fixes the bug by moving the increment of sch->q.qlen and
sch->qstats.backlog before the call to the child qdisc's peek() operation.
This ensures that queue length and backlog are always accurate when packet
drops or dequeues are triggered during the peek. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix unsafe attribute parsing in output_userspace()
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix region locking in hash types
Region locking introduced in v5.6-rc4 contained three macros to handle
the region locks: ahash_bucket_start(), ahash_bucket_end() which gave
back the start and end hash bucket values belonging to a given region
lock and ahash_region() which should give back the region lock belonging
to a given hash bucket. The latter was incorrect which can lead to a
race condition between the garbage collector and adding new elements
when a hash type of set is defined with timeouts. |
| In the Linux kernel, the following vulnerability has been resolved:
module: ensure that kobject_put() is safe for module type kobjects
In 'lookup_or_create_module_kobject()', an internal kobject is created
using 'module_ktype'. So call to 'kobject_put()' on error handling
path causes an attempt to use an uninitialized completion pointer in
'module_kobject_release()'. In this scenario, we just want to release
kobject without an extra synchronization required for a regular module
unloading process, so adding an extra check whether 'complete()' is
actually required makes 'kobject_put()' safe. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: displayport: Fix NULL pointer access
This patch ensures that the UCSI driver waits for all pending tasks in the
ucsi_displayport_work workqueue to finish executing before proceeding with
the partner removal. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: Flush gso_skb list too during ->change()
Previously, when reducing a qdisc's limit via the ->change() operation, only
the main skb queue was trimmed, potentially leaving packets in the gso_skb
list. This could result in NULL pointer dereference when we only check
sch->limit against sch->q.qlen.
This patch introduces a new helper, qdisc_dequeue_internal(), which ensures
both the gso_skb list and the main queue are properly flushed when trimming
excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie)
are updated to use this helper in their ->change() routines. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix double SIGFPE crash
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: leds: fix memory leak
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: wdm: close race between wdm_open and wdm_wwan_port_stop
Clearing WDM_WWAN_IN_USE must be the last action or
we can open a chardev whose URBs are still poisoned |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Fix timeline left held on VMA alloc error
The following error has been reported sporadically by CI when a test
unbinds the i915 driver on a ring submission platform:
<4> [239.330153] ------------[ cut here ]------------
<4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count)
<4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330942] Call Trace:
<4> [239.330944] <TASK>
<4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915]
<4> [239.331202] i915_driver_release+0x86/0xa0 [i915]
<4> [239.331482] devm_drm_dev_init_release+0x61/0x90
<4> [239.331494] devm_action_release+0x15/0x30
<4> [239.331504] release_nodes+0x3d/0x120
<4> [239.331517] devres_release_all+0x96/0xd0
<4> [239.331533] device_unbind_cleanup+0x12/0x80
<4> [239.331543] device_release_driver_internal+0x23a/0x280
<4> [239.331550] ? bus_find_device+0xa5/0xe0
<4> [239.331563] device_driver_detach+0x14/0x20
...
<4> [357.719679] ---[ end trace 0000000000000000 ]---
If the test also unloads the i915 module then that's followed with:
<3> [357.787478] =============================================================================
<3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown()
<3> [357.788031] -----------------------------------------------------------------------------
<3> [357.788204] Object 0xffff888109e7f480 @offset=29824
<3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244
<4> [357.788994] i915_vma_instance+0xee/0xc10 [i915]
<4> [357.789290] init_status_page+0x7b/0x420 [i915]
<4> [357.789532] intel_engines_init+0x1d8/0x980 [i915]
<4> [357.789772] intel_gt_init+0x175/0x450 [i915]
<4> [357.790014] i915_gem_init+0x113/0x340 [i915]
<4> [357.790281] i915_driver_probe+0x847/0xed0 [i915]
<4> [357.790504] i915_pci_probe+0xe6/0x220 [i915]
...
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
(cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
The obj_event may be loaded immediately after inserted, then if the
list_head is not initialized then we may get a poisonous pointer. This
fixes the crash below:
mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced)
mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056
mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0
mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps
IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000
[0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E)
[last unloaded: mst_pci]
CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1
Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023
pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--)
pc : dispatch_event_fd+0x68/0x300 [mlx5_ib]
lr : devx_event_notifier+0xcc/0x228 [mlx5_ib]
sp : ffff80001005bcf0
x29: ffff80001005bcf0 x28: 0000000000000001
x27: ffff244e0740a1d8 x26: ffff244e0740a1d0
x25: ffffda56beff5ae0 x24: ffffda56bf911618
x23: ffff244e0596a480 x22: ffff244e0596a480
x21: ffff244d8312ad90 x20: ffff244e0596a480
x19: fffffffffffffff0 x18: 0000000000000000
x17: 0000000000000000 x16: ffffda56be66d620
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000040 x10: ffffda56bfcafb50
x9 : ffffda5655c25f2c x8 : 0000000000000010
x7 : 0000000000000000 x6 : ffff24545a2e24b8
x5 : 0000000000000003 x4 : ffff80001005bd28
x3 : 0000000000000000 x2 : 0000000000000000
x1 : ffff244e0596a480 x0 : ffff244d8312ad90
Call trace:
dispatch_event_fd+0x68/0x300 [mlx5_ib]
devx_event_notifier+0xcc/0x228 [mlx5_ib]
atomic_notifier_call_chain+0x58/0x80
mlx5_eq_async_int+0x148/0x2b0 [mlx5_core]
atomic_notifier_call_chain+0x58/0x80
irq_int_handler+0x20/0x30 [mlx5_core]
__handle_irq_event_percpu+0x60/0x220
handle_irq_event_percpu+0x3c/0x90
handle_irq_event+0x58/0x158
handle_fasteoi_irq+0xfc/0x188
generic_handle_irq+0x34/0x48
... |
