| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM). |
| A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device.
This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. |
| Mobile Security Framework (MobSF) is an automated, all-in-one mobile application (Android/iOS/Windows) pen-testing, malware analysis and security assessment framework. According to Apple's documentation for bundle ID's, it must contain only alphanumeric characters (A–Z, a–z, and 0–9), hyphens (-), and periods (.). However, an attacker can manually modify this value in the `Info.plist` file and add special characters to the `<key>CFBundleIdentifier</key>` value. When the application parses the wrong characters in the bundle ID, it encounters an error. As a result, it will not display content and will throw a 500 error instead. The only way to make the pages work again is to manually remove the malicious application from the system. This issue has been addressed in version 4.3.1 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to versions 1.13.5 and 1.14.0, it may happen that policy rules using namespace selector(s) in their match statements are mistakenly not applied during admission review request processing due to a missing error propagation in function `GetNamespaceSelectorsFromNamespaceLister` in `pkg/utils/engine/labels.go`. As a consequence, security-critical mutations and validations are bypassed, potentially allowing attackers with K8s API access to perform malicious operations. This issue has been patched in versions 1.13.5 and 1.14.0. |
| An Improper Validation of Specified Type of Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS allows an attacker to cause an RPD memory leak leading to a Denial of Service (DoS). This memory leak only occurs when the attacker's packets are destined to any configured IPv6 address on the device. This issue affects: Juniper Networks Junos OS 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2; 22.1 versions prior to 22.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1. |
| eLabFTW is an electronic lab notebook manager for research teams. Prior to version 4.3.0, a vulnerability allows an authenticated user with an administrator role in a team to assign itself system administrator privileges within the application, or create a new system administrator account. The issue has been corrected in eLabFTW version 4.3.0. In the context of eLabFTW, an administrator is a user account with certain privileges to manage users and content in their assigned team/teams. A system administrator account can manage all accounts, teams and edit system-wide settings within the application. The impact is not deemed as high, as it requires the attacker to have access to an administrator account. Regular user accounts cannot exploit this to gain admin rights. A workaround for one if the issues is removing the ability of administrators to create accounts. |
| phpCAS is an authentication library that allows PHP applications to easily authenticate users via a Central Authentication Service (CAS) server. The phpCAS library uses HTTP headers to determine the service URL used to validate tickets. This allows an attacker to control the host header and use a valid ticket granted for any authorized service in the same SSO realm (CAS server) to authenticate to the service protected by phpCAS. Depending on the settings of the CAS server service registry in worst case this may be any other service URL (if the allowed URLs are configured to "^(https)://.*") or may be strictly limited to known and authorized services in the same SSO federation if proper URL service validation is applied. This vulnerability may allow an attacker to gain access to a victim's account on a vulnerable CASified service without victim's knowledge, when the victim visits attacker's website while being logged in to the same CAS server. phpCAS 1.6.0 is a major version upgrade that starts enforcing service URL discovery validation, because there is unfortunately no 100% safe default config to use in PHP. Starting this version, it is required to pass in an additional service base URL argument when constructing the client class. For more information, please refer to the upgrading doc. This vulnerability only impacts the CAS client that the phpCAS library protects against. The problematic service URL discovery behavior in phpCAS < 1.6.0 will only be disabled, and thus you are not impacted from it, if the phpCAS configuration has the following setup: 1. `phpCAS::setUrl()` is called (a reminder that you have to pass in the full URL of the current page, rather than your service base URL), and 2. `phpCAS::setCallbackURL()` is called, only when the proxy mode is enabled. 3. If your PHP's HTTP header input `X-Forwarded-Host`, `X-Forwarded-Server`, `Host`, `X-Forwarded-Proto`, `X-Forwarded-Protocol` is sanitized before reaching PHP (by a reverse proxy, for example), you will not be impacted by this vulnerability either. If your CAS server service registry is configured to only allow known and trusted service URLs the severity of the vulnerability is reduced substantially in its severity since an attacker must be in control of another authorized service. Otherwise, you should upgrade the library to get the safe service discovery behavior. |
| A vulnerability has been identified in SICAM PAS/PQS (All versions < V7.0), SICAM PAS/PQS (All versions >= 7.0 < V8.06). Affected software does not properly validate the input for a certain parameter in the s7ontcp.dll. This could allow an unauthenticated remote attacker to send messages and create a denial of service condition as the application crashes. At the time of assigning the CVE, the affected firmware version of the component has already been superseded by succeeding mainline versions. |
| Affected devices don't process correctly certain special crafted packets sent to port 102/tcp, which could allow an attacker to cause a denial of service in the device. |
| Credentials Disclosure vulnerabilities allow access to on board project back-up bundles.
Affected products:
ABB ASPECT - Enterprise v3.08.02;
NEXUS Series v3.08.02;
MATRIX Series v3.08.02 |
| Insufficient validation of untrusted input in Extensions in Google Chrome prior to 135.0.7049.52 allowed a remote attacker to perform privilege escalation via a crafted HTML page. (Chromium security severity: Medium) |
| A security issue was discovered in Kubelet that allows pods to bypass the seccomp profile enforcement. Pods that use localhost type for seccomp profile but specify an empty profile field, are affected by this issue. In this scenario, this vulnerability allows the pod to run in unconfined (seccomp disabled) mode. This bug affects Kubelet. |
| An Improper Validation of Specified Type of Input vulnerability in Routing Protocol Daemon (RPD) of Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause Denial of Service (DoS).
If a BGP update is received over an established BGP session which contains a tunnel encapsulation attribute with a specifically malformed TLV, rpd will crash and restart.
This issue affects:
Junos OS:
* all versions before 21.2R3-S7,
* from 21.3 before 21.3R3-S5,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3-S5,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3-S2,
* from 22.4 before 22.4R3,
* from 23.2 before 23.2R1-S2, 23.2R2.
Junos OS Evolved:
* all versions before 21.2R3-S7-EVO,
* from 21.3-EVO before 21.3R3-S5-EVO,
* from 21.4-EVO before 21.4R3-S5-EVO,
* from 22.2-EVO before 22.2R3-S3-EVO,
* from 22.3-EVO before 22.3R3-S2-EVO,
* from 22.4-EVO before 22.4R3-EVO,
* from 23.2-EVO before 23.2R1-S2-EVO, 23.2R2-EVO.
This is a related but separate issue than the one described in JSA75739 |
| Improper Input Validation vulnerability in PHOENIX CONTACT FL/TC MGUARD Family in multiple versions may allow UDP packets to bypass the filter rules and access the solely connected device behind the MGUARD which can be used for flooding attacks. |
| A URL parameter during login flow was vulnerable to injection. An attacker could insert a malicious domain in this parameter, which would redirect the user after auth and send the authorization token to the redirected domain. |
| Data Validation / Data Sanitization vulnerabilities in Linux allows unvalidated and unsanitized data to be injected in an Aspect device.
Affected products:
ABB ASPECT - Enterprise v3.08.02;
NEXUS Series v3.08.02;
MATRIX Series v3.08.02 |
| Default Credentail vulnerabilities in ASPECT on Linux allows access to the product using publicly available default credentials.
Affected products:
ABB ASPECT - Enterprise v3.07.02;
NEXUS Series v3.07.02;
MATRIX Series v3.07.02 |
| Unauthorized file access in WEB Server in ABB ASPECT - Enterprise v3.08.01; NEXUS Series
v3.08.01
; MATRIX Series
v3.08.01 allows Attacker to execute arbitrary code remotely |
| Insufficient data validation in Extensions in Google Chrome prior to 120.0.6099.62 allowed a remote attacker to perform privilege escalation via a crafted Chrome Extension. (Chromium security severity: Low) |
| Improper validation of specified type of input for some Intel(R) PROSet/Wireless and Intel(R) Killer(TM) Wi-Fi software before version 22.240 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
