| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix ovl adaptor platform device leak
mtk_drm_probe() creates an OVL adaptor platform device with
platform_device_register_data() when the display pipeline requires the
OVL adaptor.
If a later initialization step fails, the probe error path releases
the DRM resources without unregistering the already registered OVL
adaptor device. The normal remove path likewise leaves the device
registered after the DRM driver is unbound.
Keep track of whether the OVL adaptor was successfully registered and
unregister it on probe failure. Also recover the platform device from
the stored DDP component device and unregister it during normal
removal.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix tree connection leak in smb2_tree_connect()
See the procedure below:
smb2_tree_connect
ksmbd_tree_conn_connect
xa_store(&sess->tree_conns, tree_conn->id, tree_conn)
ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS)
ksmbd_share_tree_conn_inc(sc)
ksmbd_iov_pin_rsp // fail
status.ret = KSMBD_TREE_CONN_STATUS_NOMEM
// do not disconnect tree_conn
Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Do not reallocate GA log buffers on resume
Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC
(AVIC) Enablement") moved the GA log allocation from iommu_init_pci()
to enable_iommus_vapic(), which is called on every resume.
iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail
unconditionally. Each resume therefore replaces the boot-time pointers
and leaks both old allocations. The function also uses GFP_KERNEL from a
syscore resume callback, where interrupts are disabled and the non-boot
CPUs are offline.
Return early if both buffers are already allocated. Clear the pointers
in free_ga_log() so a partial allocation failure cannot leave ga_log
dangling. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: drain continuation descs after overflow in xsk_build_skb()
Fix generic xmit path multi-buffer logic when packets are either too big
(count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is
included in fragmented packet. Introduce xdp_sock::drain_cont and act
upon this flag - when it is set, keep on consuming descriptors from
AF_XDP Tx ring and put them directly onto Cq. Previously these
descriptors were silently lost and could never be reached again. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: reclaim invalid Tx descriptors in ZC batch path
The zero-copy Tx batch parser stops when it encounters an invalid
descriptor. If this happens after one or more continuation descriptors,
the Tx consumer can be advanced past fragments that are neither submitted
to the driver nor returned to userspace through the completion ring.
A similar problem occurs when a packet exceeds xdp_zc_max_segs. The
descriptors consumed up to the limit are released without completion, and
the remaining continuation descriptors can subsequently be interpreted
as the beginning of another packet.
Parse Tx batches in packet units and distinguish descriptors belonging to
complete valid packets from descriptors consumed while draining an
invalid or oversized packet. Return the former to the driver and append
the latter to the CQ address area so userspace can reclaim their UMEM
frames.
Treat a standalone invalid descriptor as a one-descriptor reclaim-only
packet. Advancing the Tx-ring consumer releases the ring slot, but does
not by itself return ownership of the referenced UMEM frame to userspace.
Once draining starts, continue until the packet's end-of-packet
descriptor is consumed. Preserve the drain state on the socket when EOP
has not yet been supplied, so draining can continue during a later call.
Leave incomplete but otherwise valid packets on the Tx ring.
Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing.
Walk their Tx sockets one packet at a time, preserving the existing
per-socket fairness scheme, instead of using the legacy one-descriptor
fallback. Keep that fallback for shared pools that do not use
multi-buffer Tx. Since the drain state is maintained per socket and both
the singular and shared paths can resume an interrupted drain, changing
the socket list from singular to shared requires no special bind-time
transition.
CQ entries are positional, and drivers may complete only part of the Tx
work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only
entries cannot be published immediately when earlier driver-visible
descriptors are still outstanding.
Track the number of driver-visible CQ entries preceding the reclaim
entries. Let xsk_tx_completed() publish partial hardware Tx completions,
and publish the reclaim entries only after every earlier Tx descriptor
has completed. Complete a reclaim-only batch immediately when there is no
driver-visible work in front of it, and prevent another Tx batch from
being appended while reclaim entries remain pending.
Also cap batch processing by the size of the pool's temporary descriptor
array, as Tx rings belonging to sockets sharing a UMEM may have different
sizes.
This ensures that every invalid Tx descriptor consumed by the ZC batch
path is either submitted to the driver as part of a valid packet or
returned to userspace without violating CQ completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
net: serialize netif_running() check in enqueue_to_backlog()
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mvebu: free generic chips on unbind
irq_alloc_domain_generic_chips() allocates generic chip data that must
be freed via irq_domain_remove_generic_chips(). The devres action
mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which
only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set.
Call irq_domain_remove_generic_chips() explicitly before
irq_domain_remove() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan()
If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks.
Use the existing error handling path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32-dcmipp: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: teardown bugs and resource leaks
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
[Bartosz: don't emit an error message on devres allocation failure] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix leak of request in netfs_write_begin() error handling
Fix netfs_write_begin() to not leak our ref on the request in the event
that we get an error from netfs_wait_for_read(). |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak destroying device
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released
on driver unbind.
Note that this also makes sure that the SPI controller is placed
correctly under the USB interface in the device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kvm: fix vector context allocation leak
When the second kzalloc (host_context.vector.datap) fails in
kvm_riscv_vcpu_alloc_vector_context, the first allocation
(guest_context.vector.datap) is leaked. Free it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running. |
