| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: make ebt_snat ARP rewrite writable
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc5882a.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix global performance monitor reference counting
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait()
dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first()
which does cursor->chain = dma_fence_get(head), taking an extra
reference. On normal loop completion, dma_fence_unwrap_next()
releases this via dma_fence_chain_walk() -> dma_fence_put().
When virtio_gpu_do_fence_wait() fails and the function returns early
from inside the loop, the cursor->chain reference is never released.
This is the only caller in the entire kernel that does an early return
inside dma_fence_unwrap_for_each.
Add dma_fence_put(itr.chain) before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix use-after-free on sbi->sync_decompress
z_erofs_decompress_kickoff() can race with filesystem unmount, causing
a use-after-free on sbi->sync_decompress.
When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff()
to queue z_erofs_decompressqueue_work() asynchronously. Then, after all
folios are unlocked, unmount workflow can proceed and sbi will be freed
before accessing to sbi->sync_decompress.
Thread (unmount) I/O completion kworker
queue_work
z_erofs_decompressqueue_work
(all folios are unlocked)
cleanup_mnt
..
erofs_kill_sb
erofs_sb_free
kfree(sbi)
access sbi->sync_decompress // UAF!! |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds check for firmware runtime memory
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix a potential NPD in cleanup_prefix_route()
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430df ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix buffer over-read in rtw_update_protection
rtw_update_protection() is called with a pointer offset into the
ies buffer but the full ie_length is passed, causing a potential
buffer over-read. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: use correct flags for device private PMD entry
Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") updated set_pmd_migration_entry() to use
pmdp_huge_get_and_clear() in the softleaf case, but made no further
adjustments to the function itself.
Therefore this function continues to incorrectly use pmd_write(),
pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed
migration entry should be marked writable, softdirty or uffd-wp
respectively.
Whilst all are incorrect, the most problematic of these is pmd_write(), as
this can lead to corrupted rmap state.
On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling
pmd_write() on a softleaf will return the softdirty state encoded in the
entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled.
This was observed when running the hmm.hmm_device_private.anon_write_child
selftest:
1. The test faults in a range then migrates it such that a device-private
THP range is established.
2. The parent then migrates it to a device-private writable PMD entry whose
folio is entirely AnonExclusive with entire_mapcount=1, softdirty set
(accidentally correct write state).
3. The parent forks and the PMD entries are set to device-private read only
entries, entire_mapcount=2, softdirty still set.
4. [BUG] The child writes to the range then migrates to RAM - intending to
install non-writable migration entries - but replacing parent and child
PMD mappings with WRITABLE entries due to misinterpreting the softdirty
bit.
5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we
set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for
both parent and child, which are therefore AnonExclusive.
6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets
entire_mapcount=2 and we end up with an AnonExclusive folio with
entire_mapcount=2! Assert fires in __folio_add_anon_rmap():
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
folio_entire_mapcount(folio) > 1 &&
PageAnonExclusive(cur_page), folio)
This patch fixes the issue by correctly referencing the softleaf entry
fields for writable, softdirty and uffd-wp in set_pmd_migration_entry().
It also only updates A/D flags if the entry is present as these are
otherwise not meaningful for a softleaf entry.
This patch also flips the if (!present) { ... } else { ... } logic in
set_pmd_migration_entry() so it is easier to understand, and adds some
comments to make things clearer.
I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone
device private THP test infrastructure") which first exposes this bug as
it was the commit that permitted test_hmm to generate the test.
However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") is the commit that actually enabled this
behaviour. |
| The Dokan Pro plugin for WordPress is vulnerable to time-based SQL Injection via the via 'latitude' and 'longitude' parameters in all versions up to, and including, 5.0.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Limit XDomain response copy to actual frame size
tb_xdomain_copy() copies req->response_size bytes from the received
packet buffer regardless of the actual frame size. When a short
response arrives, this reads past the valid frame data in the DMA
pool buffer into stale contents from previous transactions.
Use the minimum of frame size and expected response size for the
copy length. |
| glib-networking's OpenSSL backend fails to properly check the return value of memory allocation routines. An out of memory condition could potentially result in writing to an invalid memory location. |
| Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to 8.5.1, 8.4.4, 8.3.6, 8.2.6, 8.1.6, 8.0.7, and 7.10.13, in apps/meteor/app/apple/server/loginHandler.ts, handleIdentityToken parses a JWT issued by Apple during the OAuth flow. The try block checks for an email parameter. If the JWT does not contain an email address, the application falls back to accepting an arbitrary email value supplied directly in the request. Attackers are able to forge Apple JWTs that do not contain an email address and leverage this vulnerability to carry out account takeover attacks. This vulnerability is fixed in 8.5.1, 8.4.4, 8.3.6, 8.2.6, 8.1.6, 8.0.7, and 7.10.13. |
