| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid credentials for a user account with the role of Administrator or AAA Administrator. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper processing when parsing SNMP requests. An attacker could exploit this vulnerability by continuously sending SNMP queries to a specific MIB of an affected device. A successful exploit could allow the attacker to cause a kernel panic on the device, resulting in a reload and a DoS condition.
Note: This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv1 or SNMPv2c, the attacker must have a valid read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A weakness has been identified in feiyuchuixue sz-boot-parent up to 1.3.2-beta. This vulnerability affects unknown code of the file /api/admin/common/files/download. Executing a manipulation of the argument url can lead to server-side request forgery. The attack can be executed remotely. Attacks of this nature are highly complex. It is stated that the exploitability is difficult. Upgrading to version 1.3.3-beta is able to resolve this issue. This patch is called aefaabfd7527188bfba3c8c9eee17c316d094802. Upgrading the affected component is advised. The project was informed beforehand and acted very professional: "We have added a URL protocol whitelist validation to the file download interface, allowing only http and https protocols." |
| The Dart and Flutter SDKs provide software development kits for the Dart programming language. In versions of the Dart SDK prior to 3.11.0 and the Flutter SDK prior to version 3.41.0, when the pub client (`dart pub` and `flutter pub`) extracts a package in the pub cache, a malicious package archive can have files extracted outside the destination directory in the `PUB_CACHE`. A fix has been landed in commit 26c6985c742593d081f8b58450f463a584a4203a. By normalizing the file path before writing file, the attacker can no longer traverse up via a symlink. This patch is released in Dart 3.11.0 and Flutter 3.41.0.vAll packages on pub.dev have been vetted for this vulnerability. New packages are no longer allowed to contain symlinks. The pub client itself doesn't upload symlinks, but duplicates the linked entry, and has been doing this for years. Those whose dependencies are all from pub.dev, third-party repositories trusted to not contain malicious code, or git dependencies are not affected by this vulnerability. |
| ZITADEL is an open source identity management platform. Zitadel Action V2 (introduced as early preview in 2.59.0, beta in 3.0.0 and GA in 4.0.0) is a webhook based approach to allow developers act on API request to Zitadel and customize flows such the issue of a token. Zitadel's Action target URLs can point to local hosts, potentially allowing adversaries to gather internal network information and connect to internal services. When the URL points to a local host / IP address, an adversary might gather information about the internal network structure, the services exposed on internal hosts etc. This is sometimes called a Server-Side Request Forgery (SSRF). Zitadel Actions expect responses according to specific schemas, which reduces the threat vector. The patch in version 4.11.1 resolves the issue by checking the target URL against a denylist. By default localhost, resp. loopback IPs are denied. Note that this fix was only released on v4.x. Due to the stage (preview / beta) in which the functionality was in v2.x and v3.x, the changes that have been applied to it since then and the severity, respectively the actual thread vector, a backport to the corresponding versions was not feasible. Please check the workaround section for alternative solutions if an upgrade to v4.x is not possible. If an upgrade is not possible, prevent actions from using unintended endpoints by setting network policies or firewall rules in one's own infrastructure. Note that this is outside of the functionality provided by Zitadel. |
| mchange-commons-java, a library that provides Java utilities, includes code that mirrors early implementations of JNDI functionality, including support for remote `factoryClassLocation` values, by which code can be downloaded and invoked within a running application. If an attacker can provoke an application to read a maliciously crafted `jaxax.naming.Reference` or serialized object, they can provoke the download and execution of malicious code. Implementations of this functionality within the JDK were disabled by default behind a System property that defaults to `false`, `com.sun.jndi.ldap.object.trustURLCodebase`. However, since mchange-commons-java includes an independent implementation of JNDI derefencing, libraries (such as c3p0) that resolve references via that implementation could be provoked to download and execute malicious code even after the JDK was hardened. Mirroring the JDK patch, mchange-commons-java's JNDI functionality is gated by configuration parameters that default to restrictive values starting in version 0.4.0. No known workarounds are available. Versions prior to 0.4.0 should be avoided on application CLASSPATHs. |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| A vulnerability in Cisco Catalyst SD-WAN Manager could allow an authenticated, local attacker with low privileges to gain root privileges on the underlying operating system.
This vulnerability is due to an insufficient user authentication mechanism in the REST API. An attacker could exploit this vulnerability by sending a request to the REST API of the affected system. A successful exploit could allow the attacker to gain root privileges on the underlying operating system. |
| A vulnerability has been found in fosrl Pangolin up to 1.15.4-s.3. This affects the function verifyRoleAccess/verifyApiKeyRoleAccess of the component Role Handler. The manipulation leads to improper access controls. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. Upgrading to version 1.15.4-s.4 mitigates this issue. The identifier of the patch is 5e37c4e85fae68e756be5019a28ca903b161fdd5. Upgrading the affected component is advised. |
| Improper Resource Shutdown or Release vulnerability in KrakenD, SLU KrakenD-CE (CircuitBreaker modules), KrakenD, SLU KrakenD-EE (CircuitBreaker modules). This issue affects KrakenD-CE: before 2.13.1; KrakenD-EE: before 2.12.5. |
| A security vulnerability has been detected in Chia Blockchain 2.1.0. This issue affects the function _authenticate of the file rpc_server_base.py of the component RPC Credential Handler. The manipulation leads to improper authentication. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security". |
| Zed, a code editor, has an extension installer allows tar/gzip downloads. Prior to version 0.224.4, the tar extractor (`async_tar::Archive::unpack`) creates symlinks from the archive without validation, and the path guard (`writeable_path_from_extension`) only performs lexical prefix checks without resolving symlinks. An attacker can ship a tar that first creates a symlink inside the extension workdir pointing outside (e.g., `escape -> /`), then writes files through the symlink, causing writes to arbitrary host paths. This escapes the extension sandbox and enables code execution. Version 0.224.4 patches the issue. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the restoreConfig function in vikunja/pkg/modules/dump/restore.go of the go-vikunja/vikunja repository fails to sanitize file paths within the provided ZIP archive. A maliciously crafted ZIP can bypass the intended extraction directory to overwrite arbitrary files on the host system. Additionally, we’ve discovered that a malformed archive triggers a runtime panic, crashing the process immediately after the database has been wiped permanently. The application trusts the metadata in the ZIP archive. It uses the Name attribute of the zip.File struct directly in os.OpenFile calls without validation, allowing files to be written outside the intended directory. The restoration logic assumes a specific directory structure within the ZIP. When provided with a "minimalist" malicious ZIP, the application fails to validate the length of slices derived from the archive contents. Specifically, at line 154, the code attempts to access an index of len(ms)-2 on an insufficiently populated slice, triggering a panic. Version 2.0.0 fixes the issue. |
| Zed, a code editor, has a Zip Slip (Path Traversal) vulnerability exists in its extension archive extraction functionality prior to version 0.224.4. The `extract_zip()` function in `crates/util/src/archive.rs` fails to validate ZIP entry filenames for path traversal sequences (e.g., `../`). This allows a malicious extension to write files outside its designated sandbox directory by downloading and extracting a crafted ZIP archive. Version 0.224.4 fixes the issue. |
| LangChain is a framework for building LLM-powered applications. Prior to version 1.1.8, a redirect-based Server-Side Request Forgery (SSRF) bypass exists in `RecursiveUrlLoader` in `@langchain/community`. The loader validates the initial URL but allows the underlying fetch to follow redirects automatically, which permits a transition from a safe public URL to an internal or metadata endpoint without revalidation. This is a bypass of the SSRF protections introduced in 1.1.14 (CVE-2026-26019). Users should upgrade to `@langchain/community` 1.1.18, which validates every redirect hop by disabling automatic redirects and re-validating `Location` targets before following them. In this version, automatic redirects are disabled (`redirect: "manual"`), each 3xx `Location` is resolved and validated with `validateSafeUrl()` before the next request, and a maximum redirect limit prevents infinite loops. |
| LangGraph Checkpoint defines the base interface for LangGraph checkpointers. Prior to version 4.0.0, a Remote Code Execution vulnerability exists in LangGraph's caching layer when applications enable cache backends that inherit from `BaseCache` and opt nodes into caching via `CachePolicy`. Prior to `langgraph-checkpoint` 4.0.0, `BaseCache` defaults to `JsonPlusSerializer(pickle_fallback=True)`. When msgpack serialization fails, cached values can be deserialized via `pickle.loads(...)`. Caching is not enabled by default. Applications are affected only when the application explicitly enables a cache backend (for example by passing `cache=...` to `StateGraph.compile(...)` or otherwise configuring a `BaseCache` implementation), one or more nodes opt into caching via `CachePolicy`, and the attacker can write to the cache backend (for example a network-accessible Redis instance with weak/no auth, shared cache infrastructure reachable by other tenants/services, or a writable SQLite cache file). An attacker must be able to write attacker-controlled bytes into the cache backend such that the LangGraph process later reads and deserializes them. This typically requires write access to a networked cache (for example a network-accessible Redis instance with weak/no auth or shared cache infrastructure reachable by other tenants/services) or write access to local cache storage (for example a writable SQLite cache file via permissive file permissions or a shared writable volume). Because exploitation requires write access to the cache storage layer, this is a post-compromise / post-access escalation vector. LangGraph Checkpoint 4.0.0 patches the issue. |
| BigBlueButton is an open-source virtual classroom. In versions on the 3.x branch prior to 3.0.20, the string received with errorRedirectUrl lacks validation, using it directly in the respondWithRedirect function leads to an Open Redirect vulnerability. BigBlueButton 3.0.20 patches the issue. No known workarounds are available. |
| Model Context Protocol Servers is a collection of reference implementations for the model context protocol (MCP). In mcp-server-git versions prior to 2026.1.14, the git_add tool did not validate that file paths provided in the files argument were within the repository boundaries. Because the tool used GitPython's repo.index.add() rather than the Git CLI, relative paths containing `../` sequences that resolve outside the repository were accepted and staged into the Git index. Users are advised to upgrade to 2026.1.14 or newer to remediate this issue. |
| TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. A vulnerability in versions prior to 2.01 allows unauthenticated remote attackers to bypass the web server's CGI parameter security controls. Depending on the server configuration and the specific CGI executable in use, the impact is either source code disclosure or remote code execution (RCE). Anyone hosting CGI scripts (particularly interpreted languages like PHP) using vulnerable versions of TinyWeb is impacted. The problem has been patched in version 2.01. If upgrading is not immediately possible, ensure `STRICT_CGI_PARAMS` is enabled (it is defined by default in `define.inc`) and/or do not use CGI executables that natively accept dangerous command-line flags (such as `php-cgi.exe`). If hosting PHP, consider placing the server behind a Web Application Firewall (WAF) that explicitly blocks URL query string parameters that begin with a hyphen (`-`) or contain encoded double quotes (`%22`). |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could inject arbitrary scripts into pages rendered by the n8n application using different techniques on various nodes (Form Trigger node, Chat Trigger node, Send & Wait node, Webhook Node, and Chat Node). Scripts injected by a malicious workflow execute in the browser of any user who visits the affected page, enabling session hijacking and account takeover. The issues have been fixed in n8n versions 2.10.1 and 1.123.21. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Webhook node by adding `n8n-nodes-base.webhook` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
