| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Cisco Catalyst SD-WAN Manager could allow an authenticated, local attacker with low privileges to gain root privileges on the underlying operating system.
This vulnerability is due to an insufficient user authentication mechanism in the REST API. An attacker could exploit this vulnerability by sending a request to the REST API of the affected system. A successful exploit could allow the attacker to gain root privileges on the underlying operating system. |
| A vulnerability has been found in fosrl Pangolin up to 1.15.4-s.3. This affects the function verifyRoleAccess/verifyApiKeyRoleAccess of the component Role Handler. The manipulation leads to improper access controls. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. Upgrading to version 1.15.4-s.4 mitigates this issue. The identifier of the patch is 5e37c4e85fae68e756be5019a28ca903b161fdd5. Upgrading the affected component is advised. |
| Improper Resource Shutdown or Release vulnerability in KrakenD, SLU KrakenD-CE (CircuitBreaker modules), KrakenD, SLU KrakenD-EE (CircuitBreaker modules). This issue affects KrakenD-CE: before 2.13.1; KrakenD-EE: before 2.12.5. |
| A security vulnerability has been detected in Chia Blockchain 2.1.0. This issue affects the function _authenticate of the file rpc_server_base.py of the component RPC Credential Handler. The manipulation leads to improper authentication. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security". |
| Zed, a code editor, has an extension installer allows tar/gzip downloads. Prior to version 0.224.4, the tar extractor (`async_tar::Archive::unpack`) creates symlinks from the archive without validation, and the path guard (`writeable_path_from_extension`) only performs lexical prefix checks without resolving symlinks. An attacker can ship a tar that first creates a symlink inside the extension workdir pointing outside (e.g., `escape -> /`), then writes files through the symlink, causing writes to arbitrary host paths. This escapes the extension sandbox and enables code execution. Version 0.224.4 patches the issue. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the restoreConfig function in vikunja/pkg/modules/dump/restore.go of the go-vikunja/vikunja repository fails to sanitize file paths within the provided ZIP archive. A maliciously crafted ZIP can bypass the intended extraction directory to overwrite arbitrary files on the host system. Additionally, we’ve discovered that a malformed archive triggers a runtime panic, crashing the process immediately after the database has been wiped permanently. The application trusts the metadata in the ZIP archive. It uses the Name attribute of the zip.File struct directly in os.OpenFile calls without validation, allowing files to be written outside the intended directory. The restoration logic assumes a specific directory structure within the ZIP. When provided with a "minimalist" malicious ZIP, the application fails to validate the length of slices derived from the archive contents. Specifically, at line 154, the code attempts to access an index of len(ms)-2 on an insufficiently populated slice, triggering a panic. Version 2.0.0 fixes the issue. |
| Zed, a code editor, has a Zip Slip (Path Traversal) vulnerability exists in its extension archive extraction functionality prior to version 0.224.4. The `extract_zip()` function in `crates/util/src/archive.rs` fails to validate ZIP entry filenames for path traversal sequences (e.g., `../`). This allows a malicious extension to write files outside its designated sandbox directory by downloading and extracting a crafted ZIP archive. Version 0.224.4 fixes the issue. |
| LangChain is a framework for building LLM-powered applications. Prior to version 1.1.8, a redirect-based Server-Side Request Forgery (SSRF) bypass exists in `RecursiveUrlLoader` in `@langchain/community`. The loader validates the initial URL but allows the underlying fetch to follow redirects automatically, which permits a transition from a safe public URL to an internal or metadata endpoint without revalidation. This is a bypass of the SSRF protections introduced in 1.1.14 (CVE-2026-26019). Users should upgrade to `@langchain/community` 1.1.18, which validates every redirect hop by disabling automatic redirects and re-validating `Location` targets before following them. In this version, automatic redirects are disabled (`redirect: "manual"`), each 3xx `Location` is resolved and validated with `validateSafeUrl()` before the next request, and a maximum redirect limit prevents infinite loops. |
| LangGraph Checkpoint defines the base interface for LangGraph checkpointers. Prior to version 4.0.0, a Remote Code Execution vulnerability exists in LangGraph's caching layer when applications enable cache backends that inherit from `BaseCache` and opt nodes into caching via `CachePolicy`. Prior to `langgraph-checkpoint` 4.0.0, `BaseCache` defaults to `JsonPlusSerializer(pickle_fallback=True)`. When msgpack serialization fails, cached values can be deserialized via `pickle.loads(...)`. Caching is not enabled by default. Applications are affected only when the application explicitly enables a cache backend (for example by passing `cache=...` to `StateGraph.compile(...)` or otherwise configuring a `BaseCache` implementation), one or more nodes opt into caching via `CachePolicy`, and the attacker can write to the cache backend (for example a network-accessible Redis instance with weak/no auth, shared cache infrastructure reachable by other tenants/services, or a writable SQLite cache file). An attacker must be able to write attacker-controlled bytes into the cache backend such that the LangGraph process later reads and deserializes them. This typically requires write access to a networked cache (for example a network-accessible Redis instance with weak/no auth or shared cache infrastructure reachable by other tenants/services) or write access to local cache storage (for example a writable SQLite cache file via permissive file permissions or a shared writable volume). Because exploitation requires write access to the cache storage layer, this is a post-compromise / post-access escalation vector. LangGraph Checkpoint 4.0.0 patches the issue. |
| BigBlueButton is an open-source virtual classroom. In versions on the 3.x branch prior to 3.0.20, the string received with errorRedirectUrl lacks validation, using it directly in the respondWithRedirect function leads to an Open Redirect vulnerability. BigBlueButton 3.0.20 patches the issue. No known workarounds are available. |
| Model Context Protocol Servers is a collection of reference implementations for the model context protocol (MCP). In mcp-server-git versions prior to 2026.1.14, the git_add tool did not validate that file paths provided in the files argument were within the repository boundaries. Because the tool used GitPython's repo.index.add() rather than the Git CLI, relative paths containing `../` sequences that resolve outside the repository were accepted and staged into the Git index. Users are advised to upgrade to 2026.1.14 or newer to remediate this issue. |
| TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. A vulnerability in versions prior to 2.01 allows unauthenticated remote attackers to bypass the web server's CGI parameter security controls. Depending on the server configuration and the specific CGI executable in use, the impact is either source code disclosure or remote code execution (RCE). Anyone hosting CGI scripts (particularly interpreted languages like PHP) using vulnerable versions of TinyWeb is impacted. The problem has been patched in version 2.01. If upgrading is not immediately possible, ensure `STRICT_CGI_PARAMS` is enabled (it is defined by default in `define.inc`) and/or do not use CGI executables that natively accept dangerous command-line flags (such as `php-cgi.exe`). If hosting PHP, consider placing the server behind a Web Application Firewall (WAF) that explicitly blocks URL query string parameters that begin with a hyphen (`-`) or contain encoded double quotes (`%22`). |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could inject arbitrary scripts into pages rendered by the n8n application using different techniques on various nodes (Form Trigger node, Chat Trigger node, Send & Wait node, Webhook Node, and Chat Node). Scripts injected by a malicious workflow execute in the browser of any user who visits the affected page, enabling session hijacking and account takeover. The issues have been fixed in n8n versions 2.10.1 and 1.123.21. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Webhook node by adding `n8n-nodes-base.webhook` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, additional exploits in the expression evaluation of n8n have been identified and patched following CVE-2025-68613. An authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could leverage the Merge node's SQL query mode to execute arbitrary code and write arbitrary files on the n8n server. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Merge node by adding `n8n-nodes-base.merge` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could exploit a vulnerability in the JavaScript Task Runner sandbox to execute arbitrary code outside the sandbox boundary. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to limit the blast radius. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could use the Python Code node to escape the sandbox. The sandbox did not sufficiently restrict access to certain built-in Python objects, allowing an attacker to exfiltrate file contents or achieve RCE. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only., and/or disable the Code node by adding `n8n-nodes-base.code` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, a second-order expression injection vulnerability existed in n8n's Form nodes that could allow an unauthenticated attacker to inject and evaluate arbitrary n8n expressions by submitting crafted form data. When chained with an expression sandbox escape, this could escalate to remote code execution on the n8n host. The vulnerability requires a specific workflow configuration to be exploitable. First, a form node with a field interpolating a value provided by an unauthenticated user, e.g. a form submitted value. Second, the field value must begin with an `=` character, which caused n8n to treat it as an expression and triggered a double-evaluation of the field content. There is no practical reason for a workflow designer to prefix a field with `=` intentionally — the character is not rendered in the output, so the result would not match the designer's expectations. If added accidentally, it would be noticeable and very unlikely to persist. An unauthenticated attacker would need to either know about this specific circumstance on a target instance or discover a matching form by chance. Even when the preconditions are met, the expression injection alone is limited to data accessible within the n8n expression context. Escalation to remote code execution requires chaining with a separate sandbox escape vulnerability. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Review usage of form nodes manually for above mentioned preconditions, disable the Form node by adding `n8n-nodes-base.form` to the `NODES_EXCLUDE` environment variable, and/or disable the Form Trigger node by adding `n8n-nodes-base.formTrigger` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. Prior to versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10, the WebSocket functionality in Storybook's dev server, used to create and update stories, is vulnerable to WebSocket hijacking. This vulnerability only affects the Storybook dev server; production builds are not impacted. Exploitation requires a developer to visit a malicious website while their local Storybook dev server is running. Because the WebSocket connection does not validate the origin of incoming connections, a malicious site can silently send WebSocket messages to the local instance without any further user interaction. If the Storybook dev server is intentionally exposed publicly (e.g. for design reviews or stakeholder demos) the risk is higher, as no malicious site visit is required. Any unauthenticated attacker can send WebSocket messages to it directly. The vulnerability affects the WebSocket message handlers for creating and saving stories. Both are vulnerable to injection via unsanitized input in the componentFilePath field, which can be exploited to achieve persistent XSS or Remote Code Execution (RCE). Versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10 contain a fix for the issue. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, a reflected HTML injection vulnerability exists in the Projects module where the `filter` URL parameter is rendered into the DOM without output encoding when the user clicks "Filter." While `<script>` and `<iframe>` are blocked, `<svg>`, `<a>`, and formatting tags (`<h1>`, `<b>`, `<u>`) render without restriction — enabling SVG-based phishing buttons, external redirect links, and content spoofing within the trusted application origin. Version 2.0.0 fixes this issue. |
