| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler
The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in
bnxt_async_event_process() uses a firmware-supplied 'type' field
directly as an index into bp->bs_trace[] without bounds validation.
The 'type' field is a 16-bit value extracted from DMA-mapped completion
ring memory that the NIC writes directly to host RAM. A malicious or
compromised NIC can supply any value from 0 to 65535, causing an
out-of-bounds access into kernel heap memory.
The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte
and writes to bs_trace->last_offset and bs_trace->wrapped, leading to
kernel memory corruption or a crash.
Fix by adding a bounds check and defining BNXT_TRACE_MAX as
DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently
defined firmware trace types (0x0 through 0xc). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix krb5 mount with username option
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
``` |
| FastMCP is the standard framework for building MCP applications. Prior to version 3.2.0, while testing the GitHubProvider OAuth integration, which allows authentication to a FastMCP MCP server via a FastMCP OAuthProxy using GitHub OAuth, it was discovered that the FastMCP OAuthProxy does not properly validate the user's consent upon receiving the authorization code from GitHub. In combination with GitHub’s behavior of skipping the consent page for previously authorized clients, this introduces a Confused Deputy vulnerability. This issue has been patched in version 3.2.0. |
| Cloudreve is a self-hosted file management and sharing system. Prior to version 4.13.0, the application uses the weak pseudo-random number generator math/rand seeded with time.Now().UnixNano() to generate critical security secrets, including the secret_key, and hash_id_salt. These secrets are generated upon first startup and persisted in the database. An attacker can exploit this by obtaining the administrator's account creation time (via public API endpoints) to narrow the search window for the PRNG seed, and use known hashid to validate the seed. By brute-forcing the seed (demonstrated to take <3 hours on general consumer PC), an attacker can predict the secret_key. This allows them to forge valid JSON Web Tokens (JWTs) for any user, including administrators, leading to full account takeover and privilege escalation. This issue has been patched in version 4.13.0. |
| immich is a high performance self-hosted photo and video management solution. Prior to version 2.6.0, the Immich application is vulnerable to credential disclosure when a user authenticates to a shared album. During the authentication process, the application transmits the album password within the URL query parameters in a GET request to /api/shared-links/me. This exposes the password in browser history, proxy and server logs, and referrer headers, allowing unintended disclosure of authentication credentials. The impact of this vulnerability is the potential compromise of shared album access and unauthorized exposure of sensitive user data. This issue has been patched in version 2.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: Avoid boot crash in RedBoot partition table parser
Given CONFIG_FORTIFY_SOURCE=y and a recent compiler,
commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when
available") produces the warning below and an oops.
Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000
------------[ cut here ]------------
WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1
memcmp: detected buffer overflow: 15 byte read of buffer size 14
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE
As Kees said, "'names' is pointing to the final 'namelen' many bytes
of the allocation ... 'namelen' could be basically any length at all.
This fortify warning looks legit to me -- this code used to be reading
beyond the end of the allocation."
Since the size of the dynamic allocation is calculated with strlen()
we can use strcmp() instead of memcmp() and remain within bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: fix multishot recv missing EOF on wakeup race
When a socket send and shutdown() happen back-to-back, both fire
wake-ups before the receiver's task_work has a chance to run. The first
wake gets poll ownership (poll_refs=1), and the second bumps it to 2.
When io_poll_check_events() runs, it calls io_poll_issue() which does a
recv that reads the data and returns IOU_RETRY. The loop then drains all
accumulated refs (atomic_sub_return(2) -> 0) and exits, even though only
the first event was consumed. Since the shutdown is a persistent state
change, no further wakeups will happen, and the multishot recv can hang
forever.
Check specifically for HUP in the poll loop, and ensure that another
loop is done to check for status if more than a single poll activation
is pending. This ensures we don't lose the shutdown event. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: log new dentries when logging parent dir of a conflicting inode
If we log the parent directory of a conflicting inode, we are not logging
the new dentries of the directory, so when we finish we have the parent
directory's inode marked as logged but we did not log its new dentries.
As a consequence if the parent directory is explicitly fsynced later and
it does not have any new changes since we logged it, the fsync is a no-op
and after a power failure the new dentries are missing.
Example scenario:
$ mkdir foo
$ sync
$rmdir foo
$ mkdir dir1
$ mkdir dir2
# A file with the same name and parent as the directory we just deleted
# and was persisted in a past transaction. So the deleted directory's
# inode is a conflicting inode of this new file's inode.
$ touch foo
$ ln foo dir2/link
# The fsync on dir2 will log the parent directory (".") because the
# conflicting inode (deleted directory) does not exists anymore, but it
# it does not log its new dentries (dir1).
$ xfs_io -c "fsync" dir2
# This fsync on the parent directory is no-op, since the previous fsync
# logged it (but without logging its new dentries).
$ xfs_io -c "fsync" .
<power failure>
# After log replay dir1 is missing.
Fix this by ensuring we log new dir dentries whenever we log the parent
directory of a no longer existing conflicting inode.
A test case for fstests will follow soon. |
| The Ultimate Member – User Profile, Registration, Login, Member Directory, Content Restriction & Membership Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the user description field in all versions up to, and including, 2.11.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability is only exploitable when "HTML support for user description" is enabled in Ultimate Member settings. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Defer sub-object cleanup in export put callbacks
svc_export_put() calls path_put() and auth_domain_put() immediately
when the last reference drops, before the RCU grace period. RCU
readers in e_show() and c_show() access both ex_path (via
seq_path/d_path) and ex_client->name (via seq_escape) without
holding a reference. If cache_clean removes the entry and drops the
last reference concurrently, the sub-objects are freed while still
in use, producing a NULL pointer dereference in d_path.
Commit 2530766492ec ("nfsd: fix UAF when access ex_uuid or
ex_stats") moved kfree of ex_uuid and ex_stats into the
call_rcu callback, but left path_put() and auth_domain_put() running
before the grace period because both may sleep and call_rcu
callbacks execute in softirq context.
Replace call_rcu/kfree_rcu with queue_rcu_work(), which defers the
callback until after the RCU grace period and executes it in process
context where sleeping is permitted. This allows path_put() and
auth_domain_put() to be moved into the deferred callback alongside
the other resource releases. Apply the same fix to expkey_put(),
which has the identical pattern with ek_path and ek_client.
A dedicated workqueue scopes the shutdown drain to only NFSD
export release work items; flushing the shared
system_unbound_wq would stall on unrelated work from other
subsystems. nfsd_export_shutdown() uses rcu_barrier() followed
by flush_workqueue() to ensure all deferred release callbacks
complete before the export caches are destroyed.
Reviwed-by: Jeff Layton <jlayton@kernel.org> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Fix an unlikely NULL pointer deference at probe
intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
initialized, and dmc is thus NULL.
That would be the case when the call path is
intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
intel_power_domains_init_hw() is called *before* intel_dmc_init().
However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
conditionally, depending on the current and target DC states. At probe,
the target is disabled, but if DC6 is enabled, the function is called,
and an oops follows. Apparently it's quite unlikely that DC6 is enabled
at probe, as we haven't seen this failure mode before.
It is also strange to have DC6 enabled at boot, since that would require
the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and
the driver stopping / reprogramming the firmware is a poorly specified
sequence and as such unlikely an intentional BIOS behaviour. It's more
likely that BIOS is leaving an unintentionally enabled DC6 HW state
behind (without actually loading the required DMC firmware for this).
The tracking of the DC6 allowed counter only works if starting /
stopping the counter depends on the _SW_ DC6 state vs. the current _HW_
DC6 state (since stopping the counter requires the DC5 counter captured
when the counter was started). Thus, using the HW DC6 state is incorrect
and it also leads to the above oops. Fix both issues by using the SW DC6
state for the tracking.
This is v2 of the fix originally sent by Jani, updated based on the
first Link: discussion below.
(cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) |
| A weakness has been identified in FedML-AI FedML up to 0.8.9. Affected is the function sendMessage of the file grpc_server.py of the component gRPC server. Executing a manipulation can lead to deserialization. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Tenda 4G03 Pro up to 1.0/1.1/04.03.01.53/192.168.0.1. Affected by this vulnerability is an unknown functionality of the file /bin/httpd. The manipulation results in improper access controls. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. |
| OS command injection in the browser-based authentication component in Amazon Athena ODBC driver before 2.0.5.1 on Linux might allow a threat actor to execute arbitrary code by using specially crafted connection parameters that are loaded by the driver during a local user-initiated connection.
To remediate this issue, users should upgrade to version 2.0.5.1 or later. |
| A flaw has been found in Ollama up to 18.1. This issue affects some unknown processing of the file server/download.go of the component Model Pull API. Executing a manipulation can lead to server-side request forgery. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in NASA cFS up to 7.0.0 on 32-bit. Affected is the function CFE_TBL_ValidateCodecLoadSize of the file cfe/modules/tbl/fsw/src/cfe_tbl_passthru_codec.c. The manipulation leads to integer overflow. The complexity of an attack is rather high. The exploitability is told to be difficult. A fix is planned for the upcoming version milestone of the project. |
| Piwigo is an open source photo gallery application for the web. Prior to version 16.3.0, a SQL Injection vulnerability exists in the pwg.users.getList Web Service API method. The filter parameter is directly concatenated into a SQL query without proper sanitization, allowing authenticated administrators to execute arbitrary SQL commands. This issue has been patched in version 16.3.0. |
| util-linux is a random collection of Linux utilities. Prior to version 2.41.4, a TOCTOU (Time-of-Check-Time-of-Use) vulnerability has been identified in the SUID binary /usr/bin/mount from util-linux. The mount binary, when setting up loop devices, validates the source file path with user privileges via fork() + setuid() + realpath(), but subsequently re-canonicalizes and opens it with root privileges (euid=0) without verifying that the path has not been replaced between both operations. Neither O_NOFOLLOW, nor inode comparison, nor post-open fstat() are employed. This allows a local unprivileged user to replace the source file with a symlink pointing to any root-owned file or device during the race window, causing the SUID binary to open and mount it as root. Exploitation requires an /etc/fstab entry with user,loop options whose path points to a directory where the attacker has write permission, and that /usr/bin/mount has the SUID bit set (the default configuration on virtually all Linux distributions). The impact is unauthorized read access to root-protected files and block devices, including backup images, disk volumes, and any file containing a valid filesystem. This issue has been patched in version 2.41.4. |
