| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix race condition in AF_XDP generic RX path
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: free routing table on probe failure
If complete = true in dsa_tree_setup(), it means that we are the last
switch of the tree which is successfully probing, and we should be
setting up all switches from our probe path.
After "complete" becomes true, dsa_tree_setup_cpu_ports() or any
subsequent function may fail. If that happens, the entire tree setup is
in limbo: the first N-1 switches have successfully finished probing
(doing nothing but having allocated persistent memory in the tree's
dst->ports, and maybe dst->rtable), and switch N failed to probe, ending
the tree setup process before anything is tangible from the user's PoV.
If switch N fails to probe, its memory (ports) will be freed and removed
from dst->ports. However, the dst->rtable elements pointing to its ports,
as created by dsa_link_touch(), will remain there, and will lead to
use-after-free if dereferenced.
If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely
possible because that is where ds->ops->setup() is, we get a kasan
report like this:
==================================================================
BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568
Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42
Call trace:
__asan_report_load8_noabort+0x20/0x30
mv88e6xxx_setup_upstream_port+0x240/0x568
mv88e6xxx_setup+0xebc/0x1eb0
dsa_register_switch+0x1af4/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Allocated by task 42:
__kasan_kmalloc+0x84/0xa0
__kmalloc_cache_noprof+0x298/0x490
dsa_switch_touch_ports+0x174/0x3d8
dsa_register_switch+0x800/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Freed by task 42:
__kasan_slab_free+0x48/0x68
kfree+0x138/0x418
dsa_register_switch+0x2694/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
The simplest way to fix the bug is to delete the routing table in its
entirety. dsa_tree_setup_routing_table() has no problem in regenerating
it even if we deleted links between ports other than those of switch N,
because dsa_link_touch() first checks whether the port pair already
exists in dst->rtable, allocating if not.
The deletion of the routing table in its entirety already exists in
dsa_tree_teardown(), so refactor that into a function that can also be
called from the tree setup error path.
In my analysis of the commit to blame, it is the one which added
dsa_link elements to dst->rtable. Prior to that, each switch had its own
ds->rtable which is freed when the switch fails to probe. But the tree
is potentially persistent memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Fix accessing freed irq affinity_hint
In stmmac_request_irq_multi_msi(), a pointer to the stack variable
cpu_mask is passed to irq_set_affinity_hint(). This value is stored in
irq_desc->affinity_hint, but once stmmac_request_irq_multi_msi()
returns, the pointer becomes dangling.
The affinity_hint is exposed via procfs with S_IRUGO permissions,
allowing any unprivileged process to read it. Accessing this stale
pointer can lead to:
- a kernel oops or panic if the referenced memory has been released and
unmapped, or
- leakage of kernel data into userspace if the memory is re-used for
other purposes.
All platforms that use stmmac with PCI MSI (Intel, Loongson, etc) are
affected. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't ignore the return code of svc_proc_register()
Currently, nfsd_proc_stat_init() ignores the return value of
svc_proc_register(). If the procfile creation fails, then the kernel
will WARN when it tries to remove the entry later.
Fix nfsd_proc_stat_init() to return the same type of pointer as
svc_proc_register(), and fix up nfsd_net_init() to check that and fail
the nfsd_net construction if it occurs.
svc_proc_register() can fail if the dentry can't be allocated, or if an
identical dentry already exists. The second case is pretty unlikely in
the nfsd_net construction codepath, so if this happens, return -ENOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: set ATTR_CTIME flags when setting mtime
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] <TASK>
[ 113.235393] ? __warn+0x73/0xd0
[ 113.235802] ? setattr_copy+0x1ee/0x200
[ 113.236299] ? report_bug+0xf3/0x1e0
[ 113.236757] ? handle_bug+0x4d/0x90
[ 113.237202] ? exc_invalid_op+0x13/0x60
[ 113.237689] ? asm_exc_invalid_op+0x16/0x20
[ 113.238185] ? setattr_copy+0x1ee/0x200
[ 113.238692] btrfs_setattr+0x80/0x820 [btrfs]
[ 113.239285] ? get_stack_info_noinstr+0x12/0xf0
[ 113.239857] ? __module_address+0x22/0xa0
[ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd]
[ 113.240993] ? __module_text_address+0x9/0x50
[ 113.241545] ? __module_address+0x22/0xa0
[ 113.242033] ? unwind_next_frame+0x10e/0x920
[ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 113.243268] notify_change+0x2c2/0x4e0
[ 113.243746] ? stack_depot_save_flags+0x27/0x730
[ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.245613] ? process_scheduled_works+0xbe/0x310
[ 113.246181] ? worker_thread+0x100/0x240
[ 113.246696] ? kthread+0xc8/0x100
[ 113.247126] ? ret_from_fork+0x2b/0x40
[ 113.247606] ? ret_from_fork_asm+0x1a/0x30
[ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd]
ksmbd is trying to set the atime and mtime via notify_change without also
setting the ctime. so This patch add ATTR_CTIME flags when setting mtime
to avoid a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: set correct id, uid and cruid for multiuser automounts
When uid, gid and cruid are not specified, we need to dynamically
set them into the filesystem context used for automounting otherwise
they'll end up reusing the values from the parent mount. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: fix of_iomap memory leak
Smatch reports:
drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn:
'base' from of_iomap() not released on lines: 496.
This problem was also found in linux-next. In mtk_clk_simple_probe(),
base is not released when handling errors
if clk_data is not existed, which may cause a leak.
So free_base should be added here to release base. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: dlm: fix invalid derefence of sb_lvbptr
I experience issues when putting a lkbsb on the stack and have sb_lvbptr
field to a dangled pointer while not using DLM_LKF_VALBLK. It will crash
with the following kernel message, the dangled pointer is here
0xdeadbeef as example:
[ 102.749317] BUG: unable to handle page fault for address: 00000000deadbeef
[ 102.749320] #PF: supervisor read access in kernel mode
[ 102.749323] #PF: error_code(0x0000) - not-present page
[ 102.749325] PGD 0 P4D 0
[ 102.749332] Oops: 0000 [#1] PREEMPT SMP PTI
[ 102.749336] CPU: 0 PID: 1567 Comm: lock_torture_wr Tainted: G W 5.19.0-rc3+ #1565
[ 102.749343] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[ 102.749344] RIP: 0010:memcpy_erms+0x6/0x10
[ 102.749353] Code: cc cc cc cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe
[ 102.749355] RSP: 0018:ffff97a58145fd08 EFLAGS: 00010202
[ 102.749358] RAX: ffff901778b77070 RBX: 0000000000000000 RCX: 0000000000000040
[ 102.749360] RDX: 0000000000000040 RSI: 00000000deadbeef RDI: ffff901778b77070
[ 102.749362] RBP: ffff97a58145fd10 R08: ffff901760b67a70 R09: 0000000000000001
[ 102.749364] R10: ffff9017008e2cb8 R11: 0000000000000001 R12: ffff901760b67a70
[ 102.749366] R13: ffff901760b78f00 R14: 0000000000000003 R15: 0000000000000001
[ 102.749368] FS: 0000000000000000(0000) GS:ffff901876e00000(0000) knlGS:0000000000000000
[ 102.749372] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.749374] CR2: 00000000deadbeef CR3: 000000017c49a004 CR4: 0000000000770ef0
[ 102.749376] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 102.749378] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 102.749379] PKRU: 55555554
[ 102.749381] Call Trace:
[ 102.749382] <TASK>
[ 102.749383] ? send_args+0xb2/0xd0
[ 102.749389] send_common+0xb7/0xd0
[ 102.749395] _unlock_lock+0x2c/0x90
[ 102.749400] unlock_lock.isra.56+0x62/0xa0
[ 102.749405] dlm_unlock+0x21e/0x330
[ 102.749411] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 102.749416] torture_unlock+0x5a/0x90 [dlm_locktorture]
[ 102.749419] ? preempt_count_sub+0xba/0x100
[ 102.749427] lock_torture_writer+0xbd/0x150 [dlm_locktorture]
[ 102.786186] kthread+0x10a/0x130
[ 102.786581] ? kthread_complete_and_exit+0x20/0x20
[ 102.787156] ret_from_fork+0x22/0x30
[ 102.787588] </TASK>
[ 102.787855] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common kvm_intel iTCO_wdt iTCO_vendor_support kvm vmw_vsock_virtio_transport qxl irqbypass vmw_vsock_virtio_transport_common drm_ttm_helper crc32_pclmul joydev crc32c_intel ttm vsock virtio_scsi virtio_balloon snd_pcm drm_kms_helper virtio_console snd_timer snd drm soundcore syscopyarea i2c_i801 sysfillrect sysimgblt i2c_smbus pcspkr fb_sys_fops lpc_ich serio_raw
[ 102.792536] CR2: 00000000deadbeef
[ 102.792930] ---[ end trace 0000000000000000 ]---
This patch fixes the issue by checking also on DLM_LKF_VALBLK on exflags
is set when copying the lvbptr array instead of if it's just null which
fixes for me the issue.
I think this patch can fix other dlm users as well, depending how they
handle the init, freeing memory handling of sb_lvbptr and don't set
DLM_LKF_VALBLK for some dlm_lock() calls. It might a there could be a
hidden issue all the time. However with checking on DLM_LKF_VALBLK the
user always need to provide a sb_lvbptr non-null value. There might be
more intelligent handling between per ls lvblen, DLM_LKF_VALBLK and
non-null to report the user the way how DLM API is used is wrong but can
be added for later, this will only fix the current behaviour. |
| systeminformation is a System and OS information library for node.js. In versions prior to 5.27.14, the `fsSize()` function in systeminformation is vulnerable to OS command injection on Windows systems. The optional `drive` parameter is directly concatenated into a PowerShell command without sanitization, allowing arbitrary command execution when user-controlled input reaches this function. The actual exploitability depends on how applications use this function. If an application does not pass user-controlled input to `fsSize()`, it is not vulnerable. Version 5.27.14 contains a patch. |
| GLPI is a free asset and IT management software package. Starting in version 9.1.0 and prior to version 10.0.21, an unauthorized user with an API access can read all knowledge base entries. Users should upgrade to 10.0.21 to receive a patch. |
| A vulnerability has been found in Tsinghua Unigroup Electronic Archives System up to 3.2.210802(62532). Impacted is an unknown function of the file /mine/PublicReport/prinReport.html?token=java. Such manipulation of the argument comid leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Neutralization of Special Elements used in an SQL Command
('SQL Injection') in Delinea Inc. Cloud Suite and Privileged Access Service.
Remediation: This issue is fixed in Cloud Suite: 25.1 |
| net-snmp is a SNMP application library, tools and daemon. Prior to versions 5.9.5 and 5.10.pre2, a specially crafted packet to an net-snmp snmptrapd daemon can cause a buffer overflow and the daemon to crash. This issue has been patched in versions 5.9.5 and 5.10.pre2. |
| Improper Inconsistent Interpretation of
HTTP Requests ('HTTP Request Smuggling') in Delinea Inc. Cloud Suite and
Privileged Access Service.
If you're not using the latest Server Suite agents, this fix requires that you upgrade to Server Suite 2023.1 (agent 6.0.1) or later. * If you cannot upgrade to Release 2023.1 (agent version 6.0.1) or later, you can choose one of the following versions:
* Server Suite release 2023.0.5 (agent version 6.0.0-158)
* Server Suite release 2022.1.10 (agent version 5.9.1-337) |
| A weakness has been identified in GoogTech sms-ssm up to e8534c766fd13f5f94c01dab475d75f286918a8d. Affected by this issue is the function preHandle of the file LoginInterceptor.java of the component API Interface. Executing a manipulation can lead to improper authorization. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. |
| Crystal Live HTTP Server 6.01 contains a directory traversal vulnerability that allows remote attackers to access system files by manipulating URL path segments. Attackers can use multiple '../' sequences to navigate outside the web root and retrieve sensitive configuration files like Windows system files. |
| In Infoblox NIOS through 9.0.7, a High-Privileged User Can Trigger an Arbitrary File Write via the Account Creation Mechanism. |
| In Infoblox NIOS through 9.0.7, insecure deserialization can result in remote code execution. |
| Foscam Video Management System 1.1.4.9 contains a denial of service vulnerability in the username input field that allows attackers to crash the application. Attackers can overwrite the username with a 520-byte buffer of repeated 'A' characters to trigger an application crash during device login. |
| ZoneMinder v1.36.34 is vulnerable to Command Injection in web/views/image.php. The application passes unsanitized user input directly to the exec() function. |
