| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent robust futex exit race some more
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm()
If cxacru_cm() encounters an error while submitting or waiting for snd_urb,
it aborts and returns the error without killing the already submitted
rcv_urb. This leaves the rcv_urb active.
When this happens during initialization (e.g., in cxacru_atm_start()), the
driver may ignore the error and proceed to call cxacru_poll_status(), which
invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb
triggers a warning in usb_submit_urb():
cxacru 1-1:1.0: send of cm 0x84 failed (-104)
ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104
------------[ cut here ]------------
URB ffff88812658d200 submitted while active
WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0
drivers/usb/core/urb.c:379
...
Call Trace:
<TASK>
cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631
cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline]
cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828
cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814
usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927
usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178
cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370
...
To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts
early. We can safely call usb_kill_urb() on rcv_urb in the error path, as
it is safe to call even if the URB is not active (e.g., if it failed to
submit in the first place, or if it already completed). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix locally exploitable BUG_ON in amdxdna_insert_pages()
In amdxdna_insert_pages(), vm_flags_mod() sets VM_MIXEDMAP and clears
VM_PFNMAP. If an unprivileged userspace process mmaps a non-imported GEM
object and then calls madvise(MADV_DONTNEED), the PTEs will be
successfully cleared because VM_MIXEDMAP allows this (unlike VM_PFNMAP).
When userspace subsequently accesses the memory, drm_gem_shmem_fault()
handles the page fault and attempts to map the backing shmem page via
vmf_insert_pfn() which calls vmf_insert_pfn_prot(). Because the backing
shmem page is normal system memory (pfn_valid(pfn) is true) and the VMA
now has VM_MIXEDMAP set, won't this predictably trigger the explicit
assertion BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn))
Fix by removing the vm_flags_mod() call and replacing the vm_insert_pages()
pre-population with the handle_mm_fault() loop that was already used for
the import (dma-buf) path. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix net namespace reference leak in reload
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Clamp negative current limits
When a negative value is passed to ltc4282_write_curr(), the signed long
val is cast directly to u64:
drivers/hwmon/ltc4282.c:ltc4282_write_curr() {
/* need to pass it in millivolt */
u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO);
...
}
This cast converts negative inputs into large positive values. The
subsequent division result overflows the u32 in variable, truncating
to a pseudo-random positive value. When this is passed to
ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead
of zero.
Clamp val to 0 and to the maximum supported upper limit before the cast
and assign the result to a 64-bit temporary variable before the division
to avoid the underflow and an also possible overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net: prestera: validate firmware header length
prestera_fw_hdr_parse() reads the firmware header before checking
that the firmware image contains that header.
Reject images shorter than struct prestera_fw_header before decoding the
magic and version fields. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length
ncsi_send_cmd_nl() takes the number of bytes to copy from the
attacker-controlled ncsi_pkt_hdr.length field of the in-band packet
header, while the source buffer is the NCSI_ATTR_DATA netlink
attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr).
The two length sources are never cross-checked: only
nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced.
With hdr->length set larger than the attribute payload (up to 65535
against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies
past the end of the netlink attribute buffer with unsafe_memcpy(),
leaking up to ~64KB of kernel heap memory into the transmitted NCSI
command packet. The destination skb is sized by the declared payload,
so the write side does not overflow - this is a pure OOB read /
information leak, reachable with CAP_NET_ADMIN on systems with a
registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where
NET_NCSI=y is standard).
Reject commands whose declared payload extends past the end of the
data attribute.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix memory leak in exec_queue_set_hang_replay_state()
The q->replay_state is blindly overwritten, which can potentially leak
memory that was previously allocated by vmemdup_user().
Return an error if q->replay_state is not empty.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
(cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e) |
| In the Linux kernel, the following vulnerability has been resolved:
bnge: Fix NULL pointer dereference in aux device release
If allocation of auxr_dev fails during auxiliary device setup, the error
path calls auxiliary_device_uninit(), which eventually invokes
bnge_aux_dev_release().
The release callback unconditionally dereferences aux_priv->auxr_dev->pdev
to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated
on this failure path, the dereference results in a NULL pointer exception
Retrieve the parent bnge_dev from the auxiliary device's parent instead of
auxr_dev, and free auxr_dev only when it was successfully allocated. This
allows the release callback to correctly clean up partially initialized
auxiliary devices. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: Fix UAF at delayed release of MIDI2 EPs
The recent fix for UAF in ump_to_endpoint() caused another UAF because
it tries to dereference the UMP endpoint object, but this might be
executed at a delayed context where the endpoint has been already
released.
Add private_free to clear the associated data for avoiding the further
dereference for delayed releases. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leak in btrfs_do_encoded_write()
Local fuzzing of 6.12.94 has found the following memory leak:
Unreferenced object 0xffff888018050a80 (size 64):
comm "syz.0.17", pid 10297, jiffies 4294953601
hex dump (first 32 bytes):
00 10 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
10 0a 05 18 80 88 ff ff 10 0a 05 18 80 88 ff ff ................
backtrace (crc a8a6fc29):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
extent_changeset_alloc fs/btrfs/extent_io.h:207 [inline]
qgroup_reserve_data+0x1c5/0x7d0 fs/btrfs/qgroup.c:4305
btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355
btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746
btrfs_encoded_write fs/btrfs/file.c:1482 [inline]
btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507
btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738
btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:47 [inline]
do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Unreferenced object 0xffff888018050a00 (size 64):
comm "syz.0.17", pid 10297, jiffies 4294953601
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 ff 0f 00 00 00 00 00 00 ................
90 0a 05 18 80 88 ff ff 90 0a 05 18 80 88 ff ff ................
backtrace (crc cb5c9580):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
ulist_prealloc+0x9c/0x110 fs/btrfs/ulist.c:114
extent_changeset_prealloc fs/btrfs/extent_io.h:217 [inline]
__set_extent_bit+0x16b/0x1a70 fs/btrfs/extent-io-tree.c:1086
set_record_extent_bits+0x50/0x90 fs/btrfs/extent-io-tree.c:1821
qgroup_reserve_data+0x274/0x7d0 fs/btrfs/qgroup.c:4312
btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355
btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746
btrfs_encoded_write fs/btrfs/file.c:1482 [inline]
btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507
btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738
btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:47 [inline]
do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by freeing an extent changeset before returning from
btrfs_do_encoded_write(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check for tg ops in dce110_set_avmute
Some older DCE timing generators do not implement is_tg_enabled in
their ops table. Calling it unconditionally when waiting for AV mute
frames causes a NULL pointer dereference on Southern Islands dGPUs
when turning the display off over HDMI.
Check that tg and the required ops exist before waiting for frames.
(cherry picked from commit 2686a0c0aaa07bec2e24131835cf27b5fd4935a5) |
| In the Linux kernel, the following vulnerability has been resolved:
vt: add permission check for KDSKBMETA ioctl
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization. |
| In the Linux kernel, the following vulnerability has been resolved:
rqspinlock: Reset tail when preserving queue on deadlock
Currently, the destruction of the waiter queue is suppressed for
rqspinlock in cases where a deadlock is detected. Deadlock checks happen
relatively frequently (on entry for AA, within 1ms for ABBA), and waiter
threads may not be involved in locking scenarios involving deadlocks.
Thus, it is useful to not flush the queue and let other waiters take a
stab at acquiring the lock after we detect a deadlock and exit.
However, we need to follow the same logic as what we did previously for
the waitq_timeout label: reset the tail, and if we cannot, signal the
next waiter appropriately. In case of deadlocks, this signal would just
mark the MCS node as unlocked, and in case of timeouts, it would signal
RES_TIMEOUT_VAL. The difference thus is in the value propagated, which
decides whether the queue remains active or gets flushed.
Not doing the tail reset, and waiting for the next waiter can lead to
cases where we are the final waiter, and thus no next waiter arrives,
leading to intermittent stalls in this path. Once the next waiter does
join, we will be unblocked. In the theoretical case when the next waiter
never joins, we risk stalling indefinitely.
This can only happen for ABBA deadlocks, since entry into the wait queue
is guarded with AA checks. A precise sequence of executions leading up
to this scenario can be:
CPU 0 holds lock A.
CPU 1 holds lock B.
CPU 2 attempts lock B, becomes the pending waiter for B.
CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues.
CPU 1 attempts lock A.
CPU 0 detects an ABBA deadlock.
Once deadlock detection happens for CPU 0, it will sit waiting for the
next waiter in the queue to populate node->next, which will experience
delays until such a waiter arrives.
Fix this by adjusting the logic for the check for deadlocks preceding
the waitq_timeout label. It would make sense to consolidate code for
both cases and use 'ret' to distinguish the value being propagated, but
that is left as an exercise for a future refactoring task to avoid diff
noise in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race between update_event_fields and, event_define_fields
The following sequence may leads race between event_define_fields()
and update_event_fields():
CPU0 (loads module A) CPU1 (loads module B)
=============================== ===============================
load_module(A) load_module(B)
notifier_call_chain notifier_call_chain
trace_module_notify trace_module_notify
mutex_lock(&event_mutex) trace_event_update_all()
trace_module_add_events(A) down_write(&trace_event_sem)
__register_event(call_A)
__add_event_to_tracers(call_A)
event_define_fields(call_A)
for each f: list_for_each_entry(field,
list_add(&f->link, &class->fields, link)
&class->fields) field = class->fields->next;
Where access to the class->fields is not protected by the event_mutex in
trace_event_update_all().
This produces the following panic:
Unable to handle kernel access ... at virtual address 0000000000000018
pc : update_event_fields+0xf8/0x368
Call trace:
update_event_fields+0xf8/0x368
trace_event_update_all+0x7c/0x2b4
trace_module_notify+0x4c/0x1dc
notifier_call_chain+0x84/0x168
blocking_notifier_call_chain_robust+0x64/0xd4
load_module+0x10c8/0x123c
__arm64_sys_finit_module+0x230/0x31c
Fix by taking event_mutex in trace_event_update_all() before
trace_event_sem. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: error out for >10000 active_mem_bp
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't warn when the mount is completed from another user namespace
fsopen() records the caller's user namespace in fc->user_ns and hands
back an ordinary file descriptor. Nothing ties the task that calls
fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The
fd is inherited across fork() and exec() and it can be passed over a
unix socket.
Completing a context from another user namespace is allowed on purpose.
vfs_cmd_create() authorizes the create with mount_capable(), which for
FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that
succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns.
So an unprivileged task can reach the WARN_ON() in bm_fill_super():
create a user and a mount namespace in a child, call
fsopen("binfmt_misc") there, send the fscontext fd to the parent and let
the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain
unshare(1) and no capability is needed anywhere:
WARNING: fs/binfmt_misc.c:938 at bm_fill_super+0xa2/0xc0 [binfmt_misc]
CPU: 15 UID: 1000 PID: 3243382 Comm: fswarn
Call Trace:
get_tree_keyed+0x7d/0xb0
bm_get_tree+0x34/0x90 [binfmt_misc]
vfs_get_tree+0x2a/0x100
vfs_cmd_create+0x60/0xf0
__do_sys_fsconfig+0x4b2/0x500
The child needs the mount namespace because fsopen() itself gates on
may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning
the caller's mount namespace. fsconfig() doesn't repeat that check.
It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be
raised in a loop to taint the kernel and flood the log, and it panics a
kernel booted with panic_on_warn.
Keep refusing the mount and stop warning about it. Nothing in
bm_fill_super() depends on the two namespaces matching, it derives
everything from sb->s_user_ns. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: don't warn when the mount is completed from another user namespace
fsopen() records the caller's user namespace in fc->user_ns and hands
back an ordinary file descriptor. Nothing ties the task that calls
fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The
fd is inherited across fork() and exec() and it can be passed over a
unix socket.
Completing a context from another user namespace is allowed on purpose.
vfs_cmd_create() authorizes the create with mount_capable(), which for
FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that
succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns.
So an unprivileged task can reach the WARN_ON() in ovl_fill_super():
create a user and a mount namespace in a child, call fsopen("overlay")
there, send the fscontext fd to the parent and let the parent issue
FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no
capability is needed anywhere:
WARNING: fs/overlayfs/super.c:1551 at ovl_fill_super+0x7b9/0x1e20 [overlay]
CPU: 3 UID: 1000 PID: 3243376 Comm: fswarn
Call Trace:
get_tree_nodev+0x71/0xa0
ovl_get_tree+0x15/0x20 [overlay]
vfs_get_tree+0x2a/0x100
vfs_cmd_create+0x60/0xf0
__do_sys_fsconfig+0x4b2/0x500
The child needs the mount namespace because fsopen() itself gates on
may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning
the caller's mount namespace. fsconfig() doesn't repeat that check.
It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be
raised in a loop to taint the kernel and flood the log, and it panics a
kernel booted with panic_on_warn.
Keep refusing the mount and stop warning about it. ovl_parse_param()
already spells a user namespace check this way for Opt_override_creds. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.
Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index. |
